ANSI NEMA C136.49-2016 Roadway and Area Lighting Equipment - Plasma Lighting.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.49-2016Roadway and Area Lighting EquipmentPlasma Lighting 2016 National Electrical Manufacturers Association ANSI C136.49-2016 American National Standard for Roadway and Area Lighting EquipmentPlasma Lighting Secretaria

2、t: National Electrical Manufacturers Association Approved: April 7, 2016 American National Standards Institute, Inc. 2016 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in th

3、e development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. ANSI standards and guideline publications, of which the document contained herein is on

4、e, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promote fairness in the development of cons

5、ensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other

6、damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or complet

7、eness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of

8、 this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document s

9、hould rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, w

10、hich the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety o

11、r health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.49 -2016 Page i 2016 National Electrical Manu

12、facturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI. ANSI states that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judg

13、ment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and

14、a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or p

15、rocedures not conforming to the standards. The American National Standards Institute does not develop standards, and will under no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American N

16、ational Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. Th

17、e procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institu

18、te. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 2016 National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the

19、Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States

20、of America. ANSI C136.49-2016 Page ii 2016 National Electrical Manufacturers Association ANSI C136.49 -2016 Page iii 2016 National Electrical Manufacturers Association Contents 1 Scope 1 2 Normative References 1 3 Informative References 1 4 General . 2 4.1 Plasma Lighting Systems . 2 4.2 Operation i

21、n High Humidity Environments . 3 4.3 Extreme Low Temperatures . 3 5 RF Generator Requirements 3 5.1 Operating Voltages 3 5.2 Ambient Temperature 3 5.3 Case temperature 3 5.4 Mounting provisions . 3 5.5 Heat sink 3 5.6 Lamp Operation . 4 6 Lamp Requirements . 4 6.1 Applicable Standards . 4 6.2 Mounti

22、ng 4 6.3 Orientation 4 6.4 Shock and Vibration . 4 6.5 Color Temperature . 4 7 Electrical Immunity . 5 7.1 Dielectric Voltage-Withstand 5 7.2 Conducted and Radiated Emissions 5 7.3 Surge 1.2/50 s 8/20 s Combination Wave . 5 7.4 Surge 0.5 s 100 kHz Ring Wave 6 7.5 Electrical Fast Transients (EFT) 6 7

23、6 Electrostatic Discharge (ESD) . 6 7.7 Total Harmonic Distortion (THD) 7 7.8 Inrush Current 7 8 Power Coupler (Antenna) . 7 8.1 Power Coupler Temperature 7 8.2 Heat Sink 7 9 Terminals 7 9.1 RF Generator Input 7 9.2 RF Generator OutputLamp Input 7 10 Wiring and Grounding . 7 11 Ratings 8 12 Labelin

24、g 8 ANSI C136.49-2016 Page iv 2016 National Electrical Manufacturers Association Foreword At the time this standard was approved the ANSI C136 committee was composed of the following members: Alabama Power Company American Electric Lighting Caltrans Ceravision City of Kansas City, Missouri Cree Duke

25、 Energy Duke Energy Florida EJ Kramer Consulting Edison Electric Institute EPRI Eaton Lighting Solutions EYE Lighting International FRE Composites (2005) Inc. GE Lighting Georgia Power Company Green Star Products Gulf Power Company Hapco Aluminum Pole Products Holophane, An Acuity Brands Company Hub

26、bell Lighting, Inc. Inovus Solar Intertek USA Intelligent Illuminations JEA Kauffman Consulting, LLC LED Roadway Lighting LITES Los Angeles City Bureau of Street Lighting LUXIM Corp. Mississippi Power Company National Grid OSRAM SYLVANIA, Inc. Philips Lumec Puget Sound Energy PNNL ROAM/DTL SELC Ligh

27、ting Sensus Metering Silver Spring Networks Sollux Consulting SouthConn Technologies, Inc. StressCrete/King Luminaire Sunrise Technologies, Inc., FP OLC TE Connectivity Telensa Thermo Fisher Scientific Utility Metals Division of Fabricated Metals, LLC Valmont Industries, Inc. Valmont Composite Struc

28、tures Vamas Engineering and Consultants Xcel Energy ANSI C136.49-2016 Page 1 2015 National Electrical Manufacturers Association 1 Scope This standard defines the electrical and mechanical requirements of plasma type light sources for use in roadway and area lighting luminaires. 2 Normative Reference

29、s This standard incorporates by reference provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed below. For undated references, the latest edition of the publication referred to applies (including amendments). T

30、his standard incorporates provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications listed below. For undated references, the latest edition of the publication referred to applies (including amendments). ANSI C78.377 Specific

31、ations for the Chromaticity of Solid State Lighting Products ANSI C81.61 American National Standard for Electrical Lamp BasesSpecifications for Bases (Caps) for Electric Lamps ANSI C82.77 American National Standard for Harmonic Emission LimitsRelated Power Quality Requirements for Lighting Equipment

32、 ANSI C136.2 American National Standard for Roadway and Area Lighting EquipmentLuminaire Voltage Classification ANSI C136.31-2010 American National Standard for Roadway and Area Lighting EquipmentLuminaire Vibration ANSI/IESNA RP-27-2005 Photobiological Safety for Lamps and Lamp SystemsGeneral Requi

33、rements FCC Title 47, Part 18 IEC 61000-4-2 Electrostatic Discharge Immunity Test 3 Informative References This standard is intended to be used in conjunction with the following publications. The latest edition of the publication applies (including amendments). ANSI C136.14-2004 (R2009) American Nat

34、ional Standard for Roadway and Area Lighting EquipmentElliptically Shaped, Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge (HID) Lamps ANSI C136.15 American National Standard for Roadway and Area Lighting EquipmentLuminaire Field Identification ANSI C136.16-2009 Amer

35、ican National Standard for Roadway and Area Lighting EquipmentEnclosed, Post Top-mounted Luminaires ANSI C136.49-2016 Page 2 2016 National Electrical Manufacturers Association ANSI C136.22-2004 American National Standard for Roadway and Area Lighting EquipmentInternal Labeling of Luminaires ANSI C13

36、6.23-2006 American National Standard for Roadway and Area Lighting EquipmentEnclosed Architectural Luminaires ANSI C136.32-2012 American National Standard for Roadway and Area Lighting EquipmentEnclosed Setback Luminaires and Directional Floodlights for High-intensity Discharge Lamps ANSI C136.6-200

37、4 (R2012) American National Standard for Roadway and Area Lighting EquipmentMetal Heads and Reflector AssembliesMechanical and Optical Interchangeability IEEE C62.41.2-2002 IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits IES LM-79-2008 Elect

38、rical and Photometric Measurements of Solid-State Lighting Products NEMA 410-2011 Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts 4 General 4.1 Plasma Lighting Systems Plasma lighting systems generally consist of a sealed, electrode-less

39、 fused silica envelope (lamp containing a high pressure gas) and an electronic radio frequency (RF) generator, connected to a resonator. These systems are also referred to as electrode-less HID systems. A typical plasma lighting system is schematically illustrated in figure 1. The RF generator cons

40、ists of an AC/DC power supply that provides the RF source (magnetron or solid state RF source) with appropriate electrical operating conditions (voltage and current). The RF generator may include additional functionalities, such as means for dimming, power-factor correction, or output light detectio

41、n. The resonator, consisting of an applicator and a (HID) light source, is the device that couples the RF power into the lamp. The applicator may consist of air, ceramic or fused silica and may surround, partially surround or completely enclose the light source. ANSI C136.49-2016 Page 3 2016 Nationa

42、l Electrical Manufacturers Association Figure 1 Schematic of a Typical Plasma Lighting System 4.2 Operation in High Humidity Environments All components must be designed to operate in a high humidity environment normally encountered in luminaires designed for use in roadway and area lighting in outd

43、oor applications or the components must be enclosed in suitable housing designed to protect the components in high humidity environments. 4.3 Extreme Low Temperatures Manufacturers should be consulted for extreme low temperature (below 13F (25C) applications. 5 RF Generator Requirements 5.1 Operatin

44、g Voltages The RF generator shall be designed to operate at a nominal input frequency of 50 or 60 Hz, alternating current (AC) and shall be clearly marked to identify suitable input supply voltages. 5.2 Ambient Temperature The RF generator, when installed in a luminaire per the plasma lighting syste

45、m manufacturers specifications, shall be designed to operate continuously in draft-free air at an ambient temperature of 77F (25C) with no reduction in lamp life from the rated value. 5.3 Case Temperature If the RF generator has a maximum case temperature rating to achieve rated life, the test point

46、 must be so marked on the case and that temperature must be listed on the RF generators label. 5.4 Mounting Provisions Mounting provisions shall be provided to securely mount the RF generator to the luminaire. 5.5 Heat Sink ANSI C136.49-2016 Page 4 2016 National Electrical Manufacturers Association

47、Any heat sink or radiator necessary for continuous operation of the RF generator at rated output shall be properly attached to the ballast or generator in a manner to retain constant thermal contact over the life of the system. If the RF generator design requires that the luminaire housing or a comp

48、onent in the luminaire housing be a part of a heat sink, the plasma lighting system manufacturer shall provide provisions for and instructions for proper mounting. 5.6 Lamp Operation The lamp shall be suitable for operation in a suitably enclosed luminaire. If the lamp exceeds safe UV exposure stand

49、ards set by the ANSI/IESNA RP-27 Series, then lamp shall be labeled with the appropriate Risk Group rating as defined by ANSI/IESNA RP-27. 5.7 Radio-Frequency Requirements The most common frequencies used in these lamps are 433442 MHz (solid-state RF source) or 2.45 2.50 GHz (magnetron) but fundamentally plasma lamps are not limited to these frequencies and lamps have been demonstrated to operate above and below the 400 MHz band. 6 Lamp Requirements 6.1 Applicable Standards Luminaires must meet applicable parts of ANSI C136.2, ANSI C