ANSI NEMA C78.1195-2016 Electric Lamps - Double-Capped Fluorescent Lamps - Safety Specifications.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C78.1195-2016Electric Lamps Double-Capped Fluorescent Lamps Safety SpecificationsANSI C78.1430-1997 (R2009, R2016) Page 1 2016 National Electrical Manufacturers Association ANSI C78.1195-2016 American National Standard for E

2、lectric Lamps Double-Capped Fluorescent LampsSafety Specifications Secretariat: National Electrical Manufacturers Association Approved: June 29, 2016 American National Standards Institute, Inc. ANSI C78.1195-2016 Page 2 2016 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The inf

3、ormation in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of

4、 this document. ANSI standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered

5、 by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its stan

6、dards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document

7、. NEMA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake t

8、o guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA und

9、ertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Informat

10、ion and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of

11、this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibil

12、ity of the certifier or maker of the statement. ANSI C78.1195-2016 Page i 2016 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for

13、due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, su

14、bstantial agreement has been reached by directly, and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolutio

15、n. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manuf

16、acturer, the consumer, and the general public. The American National Standards Institute, Inc., does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an Ame

17、rican National Standard in the name of the American National Standards Institute, Inc. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The pr

18、ocedures of the American National Standards Institute, Inc., require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Inst

19、itute, Inc. Published by National Electrical Manufacturers Association 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 2016 National Electrical Manufacturers Association All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Conv

20、ention for the Protection of Literary and Artistic Works, and the International and Pan American copyright conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United

21、States of America ANSI C78.1195-2016 Page ii 2016 National Electrical Manufacturers Association Foreword (This foreword is not part of ANSI C78.1195) Suggestions for improvement of this standard should be submitted to: Secretariat C78 National Electrical Manufacturers Association 1300 North 17thStre

22、et, Suite 900 Rosslyn, Virginia 22209 This standard was processed and approved by Accredited Standards Committee on Electric Lamps, C78. Committee approval of the standard does not necessarily imply that all committee members voted for that approval. ANSI C78.1195-2016 Page iii 2016 National Electri

23、cal Manufacturers Association CONTENTS Foreword ii 1 Introduction 1 2 Deviations to Normative References . 1 3 Deviations to Annex E . 1 ANSI C78.1195-2016 Page iv 2016 National Electrical Manufacturers Association ANSI C78.1195-2016 Page 1 2016 National Electrical Manufacturers Association 1 Introd

24、uction The American National Standards ASC C78 adopts IEC 61195, ed2.2 (2014-09) as a Nationally Acknowledged International Standard with deviations given in clauses 2 and 3 below. 2 Deviations to Normative References The following American National Standards Institute (ANSI) standards are added to

25、clause 1.2, normative references, and may be substituted for the counterpart IEC standard when it is referenced in the text. When these standards are superseded by revision approved by ANSI, the revision shall apply: ANSI C81.61-2016 American National Standard for Electrical Lamp BasesSpecifications

26、 for Bases (Caps) for Electric Lamps ANSI C81.62-2009 (R2014) American National Standard for Electric Lampholders ANSI C81.63-2007 (R2014) American National Standard for Gauges for Electric Lamp Bases and Lampholders ANSI C81.64-2005 (R2014) American National StandardGuidelines and General Informati

27、on for Electric Lamp Bases, Lampholders and Gauges ANSI C78.81-2016 American National Standard for Electric LampsDouble-Capped Fluorescent LampsDimensional and Electrical Characteristics ANSI C82.1-2004 (R2008, R2015) American National Standard for Lamp BallastsLine Frequency Fluorescent Lamp Ballas

28、ts ANSI C82.11-2011 American National Standard for Lamp BallastsHigh Frequency Fluorescent Lamp Ballasts ANSI/IESNA RP27.1-05 Photobiological Safety for Lamps and Lamp SystemsGeneral Requirements ANSI/IESNA RP27.2-00 (R2011) Photobiological Safety for Lamps and Lamp SystemsMeasurement Systems ANSI/I

29、ESNA RP27.3-07 Photobiological Safety for Lamps and Lamp SystemsRisk Group Classification and Labeling 3 Deviations to Annex E Modify clause E.2 to read the following: E.2 Lamp end temperature under abnormal operating conditions. The following applies to all lamps in this standard with a bulb diamet

30、er of T5 or less: In the case where a lamp does not start, any continuation of cathode heating shall not lead to overheating of the lamp ends. ANSI C78.1195-2016 Page 2 2016 National Electrical Manufacturers Association In the case where one of the electrodes is depleted or broken when operating on

31、high frequency electronic ballasts, while the lamp continues to operate (partial rectification), overheating of the lamp ends should be prevented by suitable measures in the circuit. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB