ANSI NEMA C78.1435-2002 Electric Lamps - Projection Lamps - Tungsten - Halogen Lamps with G5.3 Bases (Consolidation Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991).pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C78.1435-2002Electric Lamps Projection Lamps - Tungsten - Halogen Lamps with G5.3 BasesANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991 American National Standard I Approved: March 27, 2

2、002 Secretariat: ANSLG- National Electrical Manufacturers Association I Electric Lamps Projection Lamps- Tungsten - Halogen Lamps with G5.3 Bases An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as a guide to aid the man

3、ufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards

4、. Users are cautioned to obtain the latest editions. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an Amer

5、ican National Standard in the name of the American National Standards Institute. CAUTION NOTICE This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withd

6、raw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institiite Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 1 7th Street Suite 1847, Rosslyn, VA 22209 ANS

7、I C78.1435-2002 Consolidation/Revision of ANSI C78.1418-I 991 and ANSI C78.1419-1991 II Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 17th Street Suite 1847, Rosslyn, VA 22209 ANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991 Amer

8、ican National Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with it

9、s scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus r

10、equires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using

11、 products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. Standard The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any Ameri

12、can National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretariat referred to on the title pa

13、ge. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive cur

14、rent information on all standards by calling or writing the American National Standards Institute. Printed and distributed by: Information Handling Services/Global Engineering Documents 15 Inverness Way East, Englewood, CO 801 12-5776 Under Contract with National Electrical Manufacturers Association

15、 Copyright O2002 by American National Standard Lighting Group In Affiliation with National Electrical Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publ

16、isher. Printed in the United States of America Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 17th Street Suite 1847, Rosslyn, VA 22209 . III ANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-I 991 and ANSI C78.1419-1991 TABLE OF CONTENTS 1 2 3 Foreword . 1 1

17、 Scope 1 Normative references 1 Lamp designations 2 3.1 Marking 2 Ratings 2 Perform an ce . 2 Restrict i o ns . 2 Cautionary Notice . 3 Physical characteristics . 3 Test procedures . 3 9.1 Life . 3 9.2 Illumination . 3 9.3 Seal temperature 3 9.4 Operating temperature 3 Tables and Figures Table 1 . L

18、amp ratings 2 Table 2 . Performance characteristics 2 Figure 1 . Dimensions 4 iv Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 17th Street Suite 1847. Rosslyn. VA 22209 ANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991 FOREWORD (T

19、his Foreword is not part of ANSI C78.1435-2002) Suggestions for improvement of this standard will be welcome. They should be sent to the Secretariat, C78 Committee, National Electrical Manufacturers Association, 1300 North 1 7th Street, Suite 1847, Rosslyn, VA 22209. This standard was processed and

20、approved for submittal to ANSI by Accredited Standards Committee on Electric lamps, C78, and it?s subcommittee, C78-I. Approval of the standard does not necessarily imply that all committee members voted for its approval. Information concerning the approval of this standard is based on the documents

21、 listed in the table below: I C78(1)/3935 I C78(1)/3936 I At the time of publications the C78 committee consisted of the following members: AI Rousseau, Chair C78 AI Rousseau, Technical Coordinator Randolph N. Roy, Secretariat Ken Denton, Consulting Editor Organization Represented: Name of Represent

22、ative: Advance Transformer Company Edison Electric Institute GE Lighting Illuminating Engineering Society Intertek Testing Services, Inc. Mag neTek National Electrical Manufacturers Association OSRAM SYLVANIA INC. Philips Lighting Company Underwriters Laboratories, Inc. Norman Grimshaw William Magui

23、re (Delegate) Edward Yandek Rita M. Harrold David Ellis Michael A. Stein William Buckson (Principle Delegate) Don Miletich (Alternate Delegate) Fred Carpenter (Alternate Delegate) Peter Bleasby AI Rousseau David Belt At the time of publications the C78-1 Sub-Committee had the following members: Bern

24、ie Rachel, Chair C78-1 Organization Represented: Name of Representative: GE Lighting OSRAM SYLVANIA INC. Philips Lighting Company Underwriters Laboratories, Inc. Bernie Rachel David Mullen James Oetken (Alt.) AI Rousseau Duane Will (Alt.) Alejandro Seyfert (Alt.) David Belt Ken Kempel (Alt.) Copyrig

25、ht O 2002 by American National Standard Lighting Group- NEMA 1300 North 17th Street Suite 1847, Rosslyn, VA 22209 V ANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991 American National Standard Projection Lamps- Tungsten - Halogen Lamps with G5.3 Bases 1 Scope Thi

26、s standard consolidates projection lamps with G5.3 bases into a single standard. The lamps contained in this standard are not to be considered as interchangeable, although physically they will all fit the common G5.3 lampholders. The photometry of each lamp is dependent upon the system for which it

27、was designed and on the system in which it is used. Representative photometric values are found in Table 2. Tungsten-halogen lamps with G5.3 bases having the ANSI lamp designations EML and EYB are covered. 2 Norm at ive Referen ces The following standards contain provisions which, through reference

28、in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to investigate the possibility of applying t

29、he most recent editions of the standards indicated below. ANSI C78.370 - 1997, Method of Designation for Electric Lamps - Photographic, Stage, and Studio ANSI C78.1450 - 1983 (R1994), Electric Lamps - Incandescent Projection Lamps - Method for Life Testing ANSI C79.1 - 1994, American National Standa

30、rd Nomenclature for Glass Bulbs Intended for Use with Electric Lamps ANSI C81.61 - 1990 (RI 996), Electrical Lamp Bases ANSIIIEC 78.682 - 1997, Standard Method of Measuring the Pinch Temperature of Quartz Tungsten Halogen Lamps IES LM45 - 2000, IES Approved Method for Electrical and Photometric Meas

31、urements of General Service Incandescent Filament Lamps Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 1 7th Street Suite 1847, Rosslyn, VA 22209 1 ANSI C78.1435-2002 Consolidation/Revision of ANSI C78.1418-I 991 and ANSI C78.1419-1991 ANSI Designation EML 3 Lamp Desi

32、gnations Life Correlated Color Watts Volts (hrs) Temperature (K) 175 24.0 125 3200 3.1 Marking Lamps shall be marked with the relevant ade in accordance with the photo lamp designation system, ANSI C78.370. EYB I 360 I 82.0 I 75 4 Ratings Lamp ratings are given in Table I. 3300 ANSI Designation EML

33、EYB Nom i na1 S p h er cal Lumens 5000 9800 Overhead Projector Application M icrof i I m Table 1 - Lamp Ratings 5 Performance Typical performance characteristics are given in Table 2. Table 2 - Performance Characteristics 6 Restrictions Operating Pos i tion Base down to horizontal Temperature Limits

34、 (Note 1) 350C max. on seals 250C min. on bulb Protective Shield See Cautionary Notice Note 1 : Limits apply to lamp operating temperatures in end user applications. 2 Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 17 Street Suite 1847, Rosslyn, VA 22209 ANSI C78.1435

35、-2002 Consolidation/Revision of ANSI C78.1418-1991 and ANSI C78.1419-1991 7 Cautionary Notice To assure maximum safety during handling and use of the subject lamps, the following notices should be observed: 1. Tungsten-halogen lamps operate at high temperature and at internal gas pressures above atm

36、ospheric pressure. Consequently, a lamp could shatter. Certain lamps may also emit some amount of ultraviolet radiation. Therefore a suitable protective shield, screening technique, or both shall be used with the luminaire to protect people and surroundings from both hazards. 2. Always read and obse

37、rve the information contained in the lamp manufacturers caution notice. 8 Physical Characteristics 8.1 Base Specifications G5.3; see ANSI C81.61. 8.2 Bulb Designation See ANSI C79.1. Note: In microfilm application, bulb quality (lack of stria, inclusions, bubbles, scratches, etc.) has been found to

38、be important. 8.3 Dimensions Dimensions for the lamps are shown in Figure 1 9 Test Procedures 9.1 Life Open rack, horizontal-burning position with cooling to maintain temperature limits in accordance with ANSI C78.1450. 9.2 Illumination See IES LM45. 9.3 Seal Temperature Measurement procedure is def

39、ined in ANSMEC C78.682. 9.4 Operating Temperature Standard method of measuring other lamp operating temperatures (bulb and base) is under consideration. Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 1 7th Street Suite 1847, Rosslyn, VA 22209 3 ANSI C78.1435-2002 Cons

40、olidation/Revision of ANSI C78.1418-I 991 and ANSI C78.1419-1991 NOTES: 1) Dimension E is the tadius of a cylindrical space that defines the limit of bulb excursion relative to the center line between the base pins. 2) Dimension F is a limit on the separation between the filament and the bulb wall (

41、outside diameter) at the LCL. 3) The light source dmensions width (W), height (H), and thickness (T) define a volume centered on the light center length (LCL) and the base center line within which all luminous parts of the filament shall be located. This is a maximum volume accounting for all possib

42、le positions of the filament. Actual filament size may be significantly smaller than the defined light source values. Figure 1 - Dimensions 4 Copyright O 2002 by American National Standard Lighting Group- NEMA 1300 North 17 Street Suite 1847, Rosslyn, VA 22209 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB