ANSI NEMA C78.40-2016 Electric Lamps - Specifications for Mercury Lamps.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C78.40-2016Electric Lamps Specifications for Mercury LampsANSI C78.44-2016 Page 1 2016 National Electrical Manufacturers Association ANSI C78.40-2016 American National Standard for Electric LampsSpecifications for Mercury La

2、mps Secretariat: National Electrical Manufacturers Association Approved: July 7, 2016 American National Standards Institute, Inc. ANSI C78.44-2016 Page 2 2016 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by t

3、he consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. ANSI standards and guideline publications, of whic

4、h the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promot

5、e fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any

6、 personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, expressed or i

7、mplied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sell

8、ers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someo

9、ne else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication m

10、ay be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, d

11、esigns, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C78.40-2016 P

12、age i 2016 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by The American National Standards Institute, Inc. (ANSI) that the requirements for due process, consensus, and other criteria for approval have been me

13、t by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly, and materially aff

14、ected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any re

15、spect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National

16、 Standards Institute, Inc., does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standar

17、ds Institute, Inc. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on this title page. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require

18、 that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Associati

19、on 1300 North 17thStreet, Suite 900 Rosslyn, Virginia 22209 2016 National Electrical Manufacturers Association All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the In

20、ternational and Pan American copyright conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America ANSI C78.40-2016 Page ii 2016 National Electrical

21、Manufacturers Association Foreword (This foreword is not part of American National Standard C78.40) Suggestions for improvement of this standard will be welcome. They should be sent to the Secretariat, C78 Committee, NEMA, 1300 North 17thStreet, Suite 900, Rosslyn, VA 22209. This standard was proces

22、sed and approved for submittal to ANSI by the Accredited Standards Committee on Electric Lamps, C78. Committee approval of the standard does not necessarily imply that all committee members voted for its approval. ANSI C78.40-2016 Page iii 2016 National Electrical Manufacturers Association CONTENTS

23、Foreword ii Organization of This Standard iv PART I GENERAL INFORMATION. . 1 1 Scope . . 1 1.1. Important patent disclaimer. . 1 2 Normative references . . 2 3 Definitions . . 2 4 Methods of measurement . . 2 5 Lamp specifications . 2 6 Lamp designations . . 2 7 Bulb designations . . 2 8 Base specif

24、ications . . 2 9 Maximum outline drawings . . 2 10 Electrical characteristics 10.1 Lamp operating characteristics . 2 10.2 Warm-up time . . 3 11. Reference ballasts . 3 12. Ballast design . 3 12.1 Open-circuit voltage . . . 3 12.2 Starting current 3 PART II LAMP DATA SHEETS . . 4 40-Watt H45 Mercury

25、 Lamp 4 50-Watt H46 Mercury Lamp 6 75-Watt H43 Mercury Lamp . . 8 100-Watt H38 Mercury Lamp 10 100-Watt H44 Mercury Lamp 13 175-Watt H39 Mercury Lamp . . 15 250-Watt H37 Mercury Lamp . . 18 400-Watt H33 Mercury Lamp . . 20 700-Watt H35 Mercury Lamp . . 22 1000-Watt H34 Mercury Lamp . . 24 1000-Watt

26、H36 Mercury Lamp . . 26 PART III MAXIMUM OUTLINE DRAWINGS . . 28 Base: Medium Screw (E26) Bulb: BD17, ED17, B17, E17 MOL: 131 . . 28 Base: Medium Screw (E26) Bulb: BD17, ED17, B17, E17 MOL: 139 . . 29 Base: Medium Screw (E26) Bulb: A23 MOL: 139 . . . 30 Base: Medium Screw (E26) Bulb: R40, RD40 MOL:

27、191 31 Base: Admedium, medium (E26) Skirted Screw Bulb: Par38 Reflector Spotlight, Floodlight MOL: 138 . . . 32 Base: Admedium, Bulb T10, MOL: 143 . 33 Base: Mogul Screw (E39) Bulb: ED23.5 MOL: 191 . 34 Base: Mogul Screw (E39) Bulb: BT28, E28, ED28 MOL: 211 35 Base: Mogul Screw (E39) Bulb: BT37, ED3

28、7, E37 MOL: 292 36 Base: Mogul Screw (E39) Bulb: BT46 MOL: 368 37 Base: Mogul Screw (E39) Bulb: BT56 MOL: 391 38 ANSI C78.40-2016 Page iv 2016 National Electrical Manufacturers Association Organization of This Standard This standard has been arranged in three parts: Part I covers general requirement

29、s and information. It provides normative references and offers brief explanations of the meaning or the application of some of the numerical data given on the individual lamp data sheets in Part II of this standard. It also provides requirements that are common to all mercury lamp types. Part II con

30、tains an individual data sheet for each size of mercury lamp. Part III contains the maximum outline drawings for each size of lamp. ANSI C78.40-2016 Page 1 2016 National Electrical Manufacturers Association Part I General Information 1 Scope This standard sets forth the physical and electrical requi

31、rements for single-ended metal halide lamps operated on 60 Hz ballasts to ensure interchangeability and safety. The data given also provides the basis for the electrical requirements for ballasts as well as the lamp-related requirements for luminaires. Luminous flux and lamp color are not part of th

32、is standard. 1.1 Important patent disclaimer At the time of publication, it is possible that some of the elements of this document may be the subject of patent rights. When this Standard was approved for publication, the National Electrical Manufacturers Association (NEMA) did not know of any patent

33、 applications, patents pending, or existing patents. NEMA shall not be held responsible for identifying any or all such patent rights. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this American National Standard. At

34、 the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI C78.30 Amer

35、ican National Standard for Electric LampsProcedure for Use in Preparation of Lamp Space Drawings ANSI C78.380 American National Standard for Electric LampsHigh-Intensity Discharge (HID)Method of Designation ANSI C78.389 American National Standard for Electric LampsHigh-Intensity Discharge (HID)Metho

36、ds of Measuring Characteristics ANSI C78.79 American National Standard for Electric LampsNomenclature for Envelope Shapes Intended for Use with Electric Lamps ANSI C81.61 American National Standard for Electrical Lamp BasesSpecifications for Bases (Caps) for Electric Lamps ANSI C81.62 American Natio

37、nal Standard for Electric Lampholders ANSI C81.63 American National Standard for Gauges for Electric Lamp Bases and Lampholders ANSI C81.64 American National StandardGuidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges ANSI C82.5 American National Standard for Referen

38、ce BallastsHigh-Intensity-Discharge and Low-Pressure Sodium Lamps ANSI C82.6 American National Standard for Lamp BallastsBallasts for High-Intensity Discharge (HID) LampsMethods of Measurement ANSI C82.9 American National Standard for Lamp BallastsHigh-Intensity Discharge (HID) and Low-Pressure Sodi

39、um (LPS) LampsDefinitions ANSI C78.62035 American National Standard for Electric LampsDischarge Lamps (Excluding Fluorescent Lamps)Safety Specifications UL 1598 Standard for Safety for Luminaires ANSI C78.40-2016 Page 2 2016 National Electrical Manufacturers Association 2.1 Other related standards 2

40、1 Code of Federal Regulations (CFR) 1040.30, Radiation Safety Performance Standard for Mercury Lamps ANSI C78.379-2006 (R2015) American National Standard for Electric LampsClassification of the Beam Patterns of Reflector Lamps 3 Definitions Mercury lamp terms used in this standard can be found in AN

41、SI C82.9. 4 Methods of Measurement Measurement of the electrical characteristics and the bulb and base temperatures of mercury lamps shall be made in accordance with ANSI C78.389. 5 Lamp Specifications Lamps must meet the requirements contained within ANSI C78.62035 as well as the specifications con

42、tained in this standard. 6 Lamp Designations Mercury-lamp designations are assigned in accordance with ANSI C78.380. Note that the number (two or three digits) following the first upper case letter in the designation indicates a unique set of electrical characteristics. Following the lamp number may

43、 be a slash followed by a luminaire characteristic letter. Operating position limitations are as indicated on the lamp marking. 7 Bulb Designations Bulb designations are defined in ANSI C79.1. Due to the long term use of customary designations, they will continue to be used herein. Metric designatio

44、ns for bulbs are not given in this standard. 8 Base Specifications Screw-shell-type bases are specified in ANSI C81.61. 9 Maximum Outline Drawings The maximum outline drawings in Part III of this standard show for each bulb-base-MOL category the maximum limits of the space that may be occupied by an

45、y part of the bulb, assuming a fixed base position. They do not define the actual bulb shape. The limits shown take into account the maximum bulb dimensions and the possible eccentricity of the bulb with respect to the base. The dashed lines indicate typical bulb shapes. A lamp with its base in a fi

46、xed position shall remain within the limits of the outline in the relevant maximum outline drawing. Maximum outline drawings are produced in accordance with ANSI C78.30. 10 Electrical Characteristics 10.1 Lamp operating characteristics The lamp operating characteristics in part II of this standard a

47、pply to bare lamps operating on a reference ballast at an ambient temperature of 25C 5C (77F 9F). The values of lamp voltage, current, and ANSI C78.40-2016 Page 3 2016 National Electrical Manufacturers Association wattage shown on the individual lamp data sheets in Part II are those that apply after

48、 the lamps have been aged for 100 hours. The operating voltage of lamps tends to follow a normal distribution pattern. For all lamp types except the 700 W H35 and 1,000 W H36 types, at least 95% of all lamps produced can be expected to have an operating voltage within +10 V of nominal. For the 700 W

49、 H35 and 1,000 W H36 types, the operating voltage range for 95% of the lamps is +16 V from nominal. The voltage rise to end-of-life may approximate 1% for each 5,000 hours of operation. 10.2 Warm-up time Bare lamps operating in still air shall reach 95% of the minimum lamp operating voltage within the time limit and at the ambient temperature and current specified on the applicable lamp data sheet. Lamps shall meet this requirement in the burnin