ANSI NFRC 200-2017 Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence.pdf

1、 National Fenestration Rating Council Incorporated ANSI/NFRC 200-2017E0A0 Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence 2013 NATIONAL FENESTRATION RATING COUNCIL, INC. PREPARED BY: National Fenestration Rating Council 6305 Iv

2、y Lane, Suite 140 Greenbelt, MD 20770 Voice: (301) 589-1776 Fax: (301) 589-3884 Email: infonfrc.org Website: www.nfrc.org ANSI/NFRC 200-2017E0A0 page ii 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. 2016. National Fenestration Rating Council Incorporated (NFRC)

3、. All rights reserved. NFRC publications and documents are protected by copyright. Any use of NFRC publications and documents, including reproduction or dissemination, in whole or in part, requires authorization by NFRC pursuant to NFRCs terms of use located at http:/www.nfrc.org/terms-of-use.aspx.

4、2016. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. NFRCs Certified Products Directory is protected by copyright. Any use of the NFRC Certified Products Directory, including reproduction or dissemination, in whole or in part, requires authorization by NFRC pursuant t

5、o NFRCs terms of use located at http:/www.nfrc.org/terms-of-use.aspx. ANSI/NFRC 200-2017E0A0 page iii 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. FOREWORD The National Fenestration Rating Council, Incorporated (NFRC) develops and operates a uniform rating sys

6、tem for energy and energy-related performance of fenestration and fenestration attachment products. The Rating System determines the U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) of a product, which are mandatory ratings for labeling NFRC-certified products, and are ma

7、ndatory ratings for inclusion on label certificates, and are supplemented by procedures for voluntary ratings of products for Air Leakage (AL) and Condensation Resistance. Together these rating procedures, as set forth in documents published by NFRC, are known as the NFRC Rating System. The NFRC Rat

8、ing System employs computer simulation and physical testing by NFRC-accredited laboratories to establish energy and related performance ratings for fenestration and fenestration attachment product types. The NFRC Rating System is reinforced by a certification program under which NFRC-licensed respon

9、sible parties claiming NFRC product certification shall label and certify fenestration and fenestration attachment products to indicate those energy and related performance ratings, provided the ratings are authorized for certification by an NFRC-licensed Certification and Inspection Agency (IA). Th

10、e requirements of the rating, certification, and labeling programs (Certification Programs) are set forth in the most recent versions of the following as amended, updated, or interpreted from time to time: NFRC 700 Product Certification Program (PCP) NFRC 705 Component Modeling Approach (CMA) Produc

11、t Certification Program (CMA-PCP) and through the Certification Programs and the most recent versions of its companion programs as amended, updated, or interpreted from time to time: The laboratory accreditation program (Accreditation Program), as set forth in the NFRC 701 Laboratory Accreditation P

12、rogram (LAP) The IA licensing program (IA Program), as set forth in NFRC 702 Certification Agency Program (CAP) The CMA Approved Calculation Entity (ACE) licensing program (ACE Program) as set forth in the NFRC 708 Calculation Entity Approval Program (CEAP) ANSI/NFRC 200-2017E0A0 page iv 2013. Natio

13、nal Fenestration Rating Council Incorporated (NFRC). All rights reserved. NFRC intends to ensure the integrity and uniformity of NFRC ratings, certification, and labeling by ensuring that responsible parties, testing and simulation laboratories, and IAs adhere to strict NFRC requirements. In order t

14、o participate in the Certification Programs, a Manufacturer/Responsible Party shall rate a product whose energy and energy-related performance characteristics are to be certified in accordance with mandatory NFRC rating procedures. At present, a Manufacturer/Responsible Party may elect to rate produ

15、cts for U-factor, SHGC, VT, AL, condensation resistance, or any other procedure adopted by NFRC, and to include those ratings on the NFRC temporary label affixed to its products or on the NFRC Label Certificate. U-factor, SHGC and VT, AL, and condensation resistance rating reports shall be obtained

16、from a laboratory that has been accredited by NFRC in accordance with the requirements of the NFRC 701. The rating shall then be reviewed by an IA that has been licensed by NFRC in accordance with the requirements of the NFRC 702. NFRC-licensed IAs review label format and content, conduct in-plant i

17、nspections for quality assurance in accordance with the requirements of the NFRC 702, and issue a product Certification Authorization Report (CAR) and may approve for issuance an NFRC Label Certificate for site-built or CMA products and attachment products. The IA is also responsible for the investi

18、gation of potential violations (prohibited activities) as set forth in the NFRC 707 Compliance and Monitoring Program (CAMP). Products that are labeled with the NFRC Temporary and Permanent Label, or products that are listed on an NFRC Label Certificate in accordance with NFRC requirements, are cons

19、idered to be NFRC-certified. NFRC maintains a Certified Products Directory (CPD), listing product lines and individual products selected by the Manufacturer/Responsible Party for which certification authorization has been granted. NFRC manages the Rating System and regulates the PCP, LAP, and CAP in

20、 accordance with the NFRC 700 (PCP), the NFRC 701 (LAP), the NFRC 702 (CAP), the NFRC 705 (CMA-PCP), and the NFRC 708 (CEAP) procedures, and conducts compliance activities under all these programs as well as the NFRC 707 (CAMP). NFRC continues to develop the Rating System and each of the programs. N

21、FRC owns all rights in and to each of the NFRC 700, NFRC 701, NFRC 702, NFRC 705, NFRC 707, NFRC 708 and each procedure, which is a component of the Rating System, as well as each of its registration marks, trade names, and other intellectual property. The structure of the NFRC programs and relation

22、ships among participants are shown in Figure 1, Figure 2, and Figure 3. For additional information on the roles of the IAs and laboratories and operation of the IA Program and Accreditation Program, see the NFRC 700 (PCP), NFRC 701 (LAP), and NFRC 702 (CAP) respectively ANSI/NFRC 200-2017E0A0 page v

23、 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. Figure 1 Figure 2 ANSI/NFRC 200-2017E0A0 page vi 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. Figure 3 Questions on the use of this procedure should be addressed to: National

24、 Fenestration Rating Council 6305 Ivy Lane, Suite 140 Greenbelt, MD 20770 Voice: (301) 589-1776 Fax: (301) 589-3884 Email: infonfrc.org Website: www.nfrc.org ANSI/NFRC 200-2017E0A0 page vii 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. DISCLAIMER NFRC certifica

25、tion is the authorized act of a Manufacturer/Responsible Party in: (a) labeling a fenestration or related attachment product with an NFRC Permanent Label and NFRC Temporary Label, or (b) generating a site built or CMA label certificate, either of which bears one or more energy performance ratings re

26、ported by NFRC-accredited simulation and testing laboratories and authorized for certification by an NFRC-licensed IA. Each of these participants acts independently to report, authorize certification, and certify the energy-related ratings of fenestration and related attachment products. NFRC does n

27、ot certify a product and certification does not constitute a warranty of NFRC regarding any characteristic of a fenestration or fenestration-related attachment product. Certification is not an endorsement of or recommendation for any product or product line or any attribute of a product or product l

28、ine. NFRC is not a merchant in the business of selling fenestration products or fenestration-related products, and therefore cannot warrant products as to their merchantability or fitness for a particular use. NFRC THEREFORE DISCLAIMS ANY AND ALL LIABILITY THAT MAY ARISE FROM OR IN CONNECTION WITH S

29、ERVICES PROVIDED BY, DECISIONS MADE BY OR REPORTS OR CERTIFICATIONS ISSUED OR GRANTED BY ANY NFRC-ACCREDITED LABORATORY, NFRC-LICENSED IA OR ANY PRODUCT MANUFACTURER/ RESPONSIBLE PARTY; RELIANCE ON ANY NFRC PRODUCT DESCRIPTION, SPECIFICATION, RATING, TEST OR CERTIFICATION, WHETHER APPEARING IN A REP

30、ORT, A PRODUCT CERTIFICATION AUTHORIZATION OR A PRINTED OR ELECTRONIC DIRECTORY, OR ON A LABEL, OR ON A LABEL CERTIFICATE; OR THE SALE OR USE OF ANY NFRC-RATED OR CERTIFIED PRODUCT OR PRODUCT LINE; INCLUDING BUT NOT LIMITED TO DAMAGES FOR PERSONAL OR OTHER INJURY, LOST PROFITS, LOST SAVINGS OR OTHER

31、 CONSEQUENTIAL OR INCIDENTAL DAMAGES. NFRC program participants are required to indemnify NFRC from and against such liability. ANSI/NFRC 200-2017E0A0 page viii 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. Table of Contents Foreword . iii Disclaimer vii 1. Pur

32、pose . 2 2. Scope . 2 2.1 PRODUCTS AND EFFECTS COVERED . 2 2.1.1 Products Covered Using NFRC 201 Test Procedure for SHGC 3 2.1.2 Products Covered Using NFRC 202 Test Procedure for VT 4 2.1.3 Products Covered Using NFRC 203 Test Procedure for VT 4 2.2 PRODUCTS AND EFFECTS NOT COVERED . 4 2.2.1 Produc

33、ts and Effects Not Covered (SHGC) 4 2.2.2 Products and Effects Not Covered (VT) . 5 3. Definitions . 5 4. General . 7 4.1 COMPLIANCE 7 4.1.1 Product Line Simulation and Testing . 8 4.1.2 Testing Alternative . 8 4.2 PRODUCT LINES AND INDIVIDUAL PRODUCTS . 8 4.2.1 Product Lines . 8 4.2.2 Individual Pr

34、oducts 8 4.2.3 Grouping of Products . 9 4.3 STANDARD CONDITIONS 10 4.3.1 Simulation 10 4.3.2 Testing . 11 4.3.2.1 SHGC Testing . 11 4.3.2.2 VT Testing . 11 4.4 MODEL SIZES AND CONFIGURATIONS 12 4.5 SIMULATION PROCEDURES 12 Table 4-1 Representative Glazing Pane Thicknesses . 13 4.5.1 Component 13 4.5

35、.1.1 Approved Center-of-Glazing Simulation Program 13 4.5.1.2 Approved 2-D Heat Transfer Simulation Program . 14 ANSI/NFRC 200-2017E0A0 page ix 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. 4.6 TEST PROCEDURES 14 4.6.1 Total Fenestration Product 14 4.6.2 Compon

36、ent 14 4.7 TOTAL FENESTRATION PRODUCT RATING . 15 5. Variation from the General Requirements . 19 5.1 WINDOW AND SLIDING GLASS DOORS 19 5.1.1 Determining Specialty Products Tables for Sightline Variations . 19 5.2 SWINGING DOORS 20 5.2.1 Calculation of Total Product Rating . 20 5.2.1.1 Simplificatio

37、n . 20 5.2.2 Determining Table of SHGC and VT 0 and 1 Values for Grouped Sightlines (See 5.1.1) 20 5.3 SKYLIGHTS . 24 5.3.1 Determining Table of SHGC and VT 0 and 1 Values for Grouped Sightlines (See 5.1.1) 24 5.4 TUBULAR DAYLIGHTING DEVICES . 24 5.5 GARAGE (VEHICULAR ACCESS) DOORS 24 5.5.1 Scope 24

38、 5.5.2 Variations from Standard Product Lines 24 5.5.3 Variations from Standard Individual Products 24 5.5.4 Variations from Standard Simulation and Test Conditions . 24 5.5.5 Total Product Rating 25 5.6 SITE BUILT . 26 5.7 APPLIED FILMS . 26 5.7.1 Scope 26 5.7.2 Variations from Standard Product Lin

39、es 26 5.7.3 Variations from Standard Individual Products 26 5.7.4 Variations from Standard Simulation and Test Conditions . 27 5.7.4.1 Approved Center-of-Glazing Computational Program27 Table 5-1 Center-of-Glazing Values - SHGCc and VTc . 28 5.7.5 Calculation of Total Product Rating . 28 Table 5-2 V

40、alues of SHGC0 and SHGC1 and VT0 and VT1 for Reference Products . 28 5.7.5.1 Reference Fenestration Products . 28 Table 5-3 Values of SHGC and VT for Reference Fenestration Products and Applied Film . 29 5.7.5.2 Total Fenestration Product SHGC 29 5.7.5.3 Total Fenestration Product VT 29 5.7.6 Testin

41、g . 30 5.7.6.1 Center-of-Glazing Component Test Procedure . 30 5.7.6.2 Total Fenestration Product Test Procedure 30 5.7.6.3 Total Fenestration Product SHGC for Non-Model Sizes 30 ANSI/NFRC 200-2017E0A0 page x 2013. National Fenestration Rating Council Incorporated (NFRC). All rights reserved. 5.7.7

42、Figures . 31 Figure 5-1 Residential Fixed Aluminum Frame Reference Product . 31 Figure 5-2 Non-residential Windowwall Aluminum Frame Reference Product 32 Figure 5-3 Cross Section A . 33 Figure 5-4 Cross Section B . 33 5.8 DYNAMIC ATTACHMENT PRODUCTS FOR SWINGING DOORS 34 5.8.1 Scope 34 5.8.2 Methodo

43、logy 34 5.8.3 Approved Computational Program . 34 5.9 COMPONENT MODELING APPROACH (CMA) FOR NON-RESIDENTIAL BUILDING FENESTRATION PRODUCTS . 34 5.9.1 Scope 34 5.9.2 Variations from Standard Product Lines 34 5.9.3 Variations from Standard Individual Products 35 5.9.4 Variations from Standard Simulati

44、on and Test Conditions . 35 5.9.5 Calculation of Total Product Rating . 36 5.9.5.1 Component Modeling Procedure 36 5.9.5.2 Basic Product Line Model and Component Information for Calculating and Reporting SHGC and VT 36 5.9.5.3 Definition of Low and High Configurations 37 5.9.5.4 Approved Total Fenes

45、tration Product SHGC Calculation Procedure . 37 5.9.5.5 Determining SHGC and VT for Sloped Glazing Systems 37 5.9.5.6 Approved Total Fenestration Product SHGC and VT for Non-Model Sizes 37 6. References 38 Appendix A (Non-Mandatory Information) . 40 Index . 41 ANSI/NFRC 200-2017E0A0 page 2 2013. Nat

46、ional Fenestration Rating Council Incorporated (NFRC). All rights reserved. 1. PURPOSE To specify a method for calculating solar heat gain coefficient (SHGC) and visible transmittance (VT) at normal (perpendicular) incidence for fenestration products containing glazings or glazing with applied films

47、, with specular optical properties calculated in accordance with ISO 15099 8 (except where noted) or tested in accordance with NFRC 201 2, NFRC 202 3, and NFRC 203 4. Note: This standard specifies a method for calculating the solar heat gain and visible transmittance from direct solar radiation thro

48、ugh most fenestration products at normal incidence only. This procedure is limited to normal incidence calculations because solar optical data needed for such calculations is typically only available at normal incidence. While solar radiation rarely enters a fenestration product at normal incidence,

49、 SHGC and VT at near normal angles of incidence (less than 30o off normal) are typically very similar to those at normal incidence; for other angles, the SHGC and VT at normal can be used, to first order, as an indicator of the relative magnitude of solar heat gain (SHG) and VT. 2. SCOPE 2.1 Products and Effects Covered The following products and effects are within the scope of NFRC 200 and shall be permitted to be rated in accordance with this procedure. A. Products of all frame materials including (but not li