ANSI STM11.13-2015 Two Point Resistance Measurement.pdf

1、 ANSI/ESD STM11.13-2015 Revision of ANSI/ESD STM11.13-2004 For the Protection of Electrostatic Discharge Susceptible Items Two-Point Resistance Measurement Electrostatic Discharge Association 7900 Turin Road, Bldg. 3 Rome, NY 13440 An American National Standard Approved June 16, 2015 ANSI/ESD STM11.

2、13-2015 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Two-Point Resistance Measurement Approved February 10, 2015 ESD Association ANSI/ESD STM11.13-2015 Electrostatic Discharge Association (ESDA) standards and publications are designed to serv

3、e the public interest by eliminating misunderstandings between manufacturers and purchasers, facilitating the interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining the proper product for his particular needs. The existence of such standards and public

4、ations shall not, in any respect, preclude any member or non-member of the Association from manufacturing or selling products not conforming to such standards and publications. Nor shall the fact that a standard or publication is published by the Association preclude its voluntary use by non-members

5、 of the Association, whether the document is to be used either domestically or internationally. Recommended standards and publications are adopted by the ESDA in accordance with the ANSI Patent policy. Interpretation of ESDA Standards: The interpretation of standards in-so-far as it may relate to a

6、specific product or manufacturer is a proper matter for the individual company concerned and cannot be undertaken by any person acting for the ESDA. The ESDA Standards Chairman may make comments limited to an explanation or clarification of the technical language or provisions in a standard, but not

7、 related to its application to specific products and manufacturers. No other person is authorized to comment on behalf of the ESDA on any ESDA Standard. THE CONTENTS OF ESDAS STANDARDS AND PUBLICATIONS ARE PROVIDED “AS-IS,” AND ESDA MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESSED OR IMPLIED, OF AN

8、Y KIND WITH RESPECT TO SUCH CONTENTS. ESDA DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NON-INFRINGEMENT. ESDA STANDARDS AND PUBLICATIONS ARE CONSIDERED TECHNICALLY SOUND AT THE TIME THE

9、Y ARE APPROVED FOR PUBLICATION. THEY ARE NOT A SUBSTITUTE FOR A PRODUCT SELLERS OR USERS OWN JUDGEMENT WITH RESPECT TO ANY PARTICULAR PRODUCT DISCUSSED, AND ESDA DOES NOT UNDERTAKE TO GUARANTEE THE PERFORMANCE OF ANY INDIVIDUAL MANUFACTURERS PRODUCTS BY VIRTUE OF SUCH STANDARDS OR PUBLICATIONS. THUS

10、, ESDA EXPRESSLY DISLAIMS ANY RESPONSIBILITY FOR DAMAGES ARISING FROM THE USE, APPLICATION, OR RELIANCE BY OTHERS ON THE INFORMATION CONTAINED IN THESE STANDARDS OR PUBLICATIONS. NEITHER ESDA, NOR ITS MEMBERS, OFFICERS, EMPLOYEES OR OTHER REPRESENTATIVES WILL BE LIABLE FOR DAMAGES ARISING OUT OF, OR

11、 IN CONNECTION WITH, THE USE OR MISUSE OF ESDA STANDARDS OR PUBLICATIONS, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. THIS IS A COMPREHENSIVE LIMITATION OF LIABILITY THAT APPLIES TO ALL DAMAGES OF ANY KIND, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, INCOME OR PROFIT, LOSS OF OR DAMAGE TO PROPERTY

12、AND CLAIMS OF THIRD PARTIES. Published by: Electrostatic Discharge Association 7900 Turin Road, Bldg. 3 Rome, NY 13440 Copyright 2015 by ESD Association All rights reserved No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior wr

13、itten permission of the publisher. Printed in the United States of America ISBN: 1-58537-279-XCAUTION NOTICE DISCLAIMER OF WARRANTIES DISCLAIMER OF GUARANTY LIMITATION ON ESDAs LIABILITY ANSI/ESD STM11.13-2015 i (This foreword is not part of ESD Association Standard Test Method ANSI/ESD STM11.13-201

14、5) FOREWORD This standard test method1has been developed to establish a test method for measuring resistance where the concentric ring electrodes of ANSI/ESD STM11.11 cannot be used. This method measures the resistance between two points on a materials surface without consideration of the materials

15、means of achieving conductivity. Constant voltage instrumentation was used to collect the data used to validate this standard test method. Other instrumentation using an open circuit rated voltage supply is represented in this document as guidance. Beneficial comments (recommendations, additions, de

16、letions) and pertinent data, which may be of use in improving future versions of this document, should be addressed to: ESD Association, 7900 Turin Road, Bldg. 3, Rome, NY 13440. This standard test method was originally designated ANSI/ESD STM11.13-2004 and approved on September 19, 2004. ANSI/ESD S

17、TM11.13-2015 is a revision of ANSI/ESD STM11.13-2004 and was approved on February 10, 2015. At the time ANSI/ESD STM11.13-2015 was prepared, the 11.0 Packaging Subcommittee had the following members: David E. Swenson, Chair Affinity Static Control Consulting, LLC Kevin Duncan Seagate Technology Kurt

18、 Edwards Lubrizol Conductive Polymers Gene Felder DESCO Industries, Inc. Reinhold Gaertner, TAS Rep Infineon Technologies AG Steven Gerken United States Air Force Meghan Hodge 3M Doug Holtz Conductive Containers Gregory Manning NASA/ARES Technical Services Gene Monroe NASA - LARC Dale Parkin Seagate

19、 Technology Timothy Prass Raytheon Francisco Rodriquez 3M Jeff Salisbury Finisar, Inc. Julius Turangan Ovation, Inc. Robert Vermillion RMV Technology Group, LLC Scott Ward Texas Instruments, Inc. Stanley Weitz Electro-Tech Systems, Inc. Craig Zander Transforming Technologies The following individual

20、s made significant contributions to ANSI/ESD STM11.12-2015: Brent Beamer 1 ESD Association Standard Test Method (STM): A definitive procedure for the identification, measurement and evaluation of one or more qualities, characteristics or properties of a material, product, system or process that yiel

21、d a reproducible test results. ANSI/ESD STM11.13-2015 ii At the time ANSI/ESD STM11.13-2004 was prepared, the 11.0 Packaging Subcommittee had the following members: Brent Beamer, Chair Static Control Components Donald Boehm Dou Yee Enterprises Rick Knight Ranger Plastic Extrusions, Inc. Carl Newberg

22、 Rivers Edge Tech. Service Microstat Labs Dale Parkin IBM Corporation Charles Perry Monroe Electronics Julius Turangan Western Digital Corporation Robert Vermillion RMV Technology Group, LLC Stanley Weitz Electro-Tech Systems, Inc. The following individuals contributed to the development of ANSI/ESD

23、 STM11.13-2004: Ben Baumgartner ESD West Joe Blanchard Bradford Company Walt Gately Gately & Associates, Inc Kyung J. Kim BF Goodrich SCP Stephen Koehn Michael J. Manders Air Force Research Laboratory ANSI/ESD STM11.13-2015 iii TABLE OF CONTENTS 1.0 PURPOSE & SCOPE . 1 1.1 PURPOSE . 1 1.2 SCOPE . 1

24、2.0 REFERENCED PUBLICATIONS . 1 3.0 DEFINITIONS . 1 4.0 PERSONNEL SAFETY 1 5.0 GENERAL DISCUSSION 2 6.0 TEST EQUIPMENT 2 6.1 TWO-POINT PROBE 2 6.2 INSULATIVE SUPPORT SURFACE . 2 6.3 INSTRUMENTATION . 2 6.4 TEST LEADS 3 6.5 VERIFICATION RESISTORS 3 7.0 SAMPLE PREPARATION . 3 8.0 VERIFICATION PROCEDUR

25、E 3 9.0 TEST PROCEDURE 3 10.0 TEST RESULTS . 4 FIGURES Figure 1: Two-Point Probe Configuration 4 Figure 2: Probe to Instrumentation Connection 5 Figure 3: Resistance Verification Fixture 6 Figure 4: Spring Compression for Measurement . 6 TABLES Table 1: Materials for Two-Point Probe 5 ANNEXES Annex

26、A (Informative): Test Method Notes . 7 Annex B (Informative): ANSI/ESD STM11.13-2015 Revision History 8 ESD Association Standard Test Method ANSI/ESD STM11.13-2015 1 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items Two-Point Resistance Measurement

27、1.0 PURPOSE & SCOPE 1.1 Purpose This standard test method provides a test method to measure the resistance between two points on an items surface. 1.2 Scope This standard test method is intended for measuring the resistance of packaging items in the range of 1.0 x 10 4 R 1012 ohms. 2. Section 2.0 References was updated. 3. Section 4.0 Personnel Safety was added. 4. An alternative boilerplate method was added to Section 6.2 Insulative Support Surface. 5. The boiler plate paragraphs were added to Section 6.3 Resistance Measurement Apparatus.