ANSI TIA EIA 455-223-2001 Optical Fiber Amplifiers - Part 2 Digital Applications - Performance Specification Template《光纤放大器.第2部分 数字设施.性能规范模板》.pdf

1、ANSI/TIA/EIA-455-223-2001 Approved: December 20, 2001 Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licen

2、se from IHS-,-,-NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtain

3、ing with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of su

4、ch Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) patent poli

5、cy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements.

6、It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. These Materials are subject to copyright claims of IEC, ANSI, and TIA. No part of this publication may be reproduced

7、 in any form, including an electronic retrieval system, without the prior written permission of TIA. All requests pertaining to the FOTP-223-IEC 61291-2: Optical Fibre Amplifiers - Part 2 :Digital Applications - Performance Specification Template Standard should be submitted to TIA. (From Standards

8、Proposal No. 3-0025, formulated under the cognizance of the TIA FO-2.7 Subcommittee on Optically Amplified Devices, Subsystems, and Systems.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 200 i Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please

9、refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) All rights reserved Printed in U.S.A. Copyright Electronic Industries Alliance Provided by IHS un

10、der license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION

11、 OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims copyright to the document pursuant to licenses and permi

12、ssion granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.orZr/standards/sfZr/engineering manual.ch. TIAS

13、function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLEC

14、TUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF

15、IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES

16、CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH

17、 ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT,

18、 SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

19、. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permit

20、ted without license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 CONTENTS 1 Scope and object 2 Normative references . 3 Definitions . 4 Product specification worksheet for power amplifiers . 5 Product specification worksheet for pre-amplifiers . 6 Product specification worksheet for line amplifie

21、rs 7 Product specification worksheet for optically amplified transmitters . 8 Product specification worksheet for optically amplified receivers Annex A (informative) List of abbreviations . Page . 1 . 1 . 1 . 3 . 4 . 5 . 7 . 9 . 10 I Copyright Electronic Industries Alliance Provided by IHS under lic

22、ense with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:200 TIA/EIA-455-223 II Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291

23、-2 O IEC:2000 TIA/EIA-455-223 INTERNATIONAL ELECTROTECHN ICAL COMMISSION FDIS 86C1273lFDIS OPTICAL FIBRE AMPLIFIERS - Report on voting 86C1276lRVD Part 2: Digital applications - Performance specification template FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organiza

24、tion for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,

25、 the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also par

26、ticipate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as po

27、ssible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical spe

28、cifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regiona

29、l standards. Any divergence between the I EC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with

30、 one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61291 -2 has been prepared by

31、subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. Th

32、is publication has been drafted in accordance with the ISO/IEC Directives, Part 3. Annex A is for information only. . III Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:20

33、00 TIA/EIA-455-223 The committee has decided that the contents of this publication will remain unchanged until 2002. At this date, the publication will be reconfirmed; withdrawn; amended. replaced by a revised edition, or iv Copyright Electronic Industries Alliance Provided by IHS under license with

34、 EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 INTRODUCTION As far as can be determined, this is the first International Standard on this subject. This technology is evolving, hence amendments to, and new editions of, this st

35、andard can be expected. Each abbreviation introduced in this standard is explained in the text at least the first time it appears. However, for an easier understanding of the whole text, a list of the abbreviations used in this standard is given in annex A. V Copyright Electronic Industries Alliance

36、 Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 vi Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without

37、 license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 OPTICAL FIBRE AMPLIFIERS - Part 2: Digital applications - Performance specification template 1 Scope and object This performance specification template applies to optical fibre amplifier (OFA) devices and subsystems to be used in digital appli

38、cations. The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of OFA devices and subsystems to be used in digital applications. Detail specification writers may add specification parameters and/or groups of speci

39、fication parameters for particular applications. However, detail specification writers may not remove specification parameters specified in this standard. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this

40、part of IEC 61291. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 61291 are encouraged to investigate the possibility of applying the most recent editions of the normative documents ind

41、icated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 61 280 (all parts), fibre optic communications subsystem basic test procedures IEC 61290 (all parts), Opti

42、cal fibre amplifiers IEC 61291-1 :1998, Optical fibre amplifiers - Part I: Generic specification IEC 60825-1 :I 993, Safety of laser products - Part I: Equipment classification, requirements and users guide ITU-T Recommendation G.957:1995, Optical interfaces for equipment and systems relating to the

43、 synchronous digital hierarchy 3 Definitions For the purpose of this International Standard, the definitions of IEC 61291-1 apply. Possible supplementary definitions specific to OFAs for digital applications may be given in detail specifications. 1 Copyright Electronic Industries Alliance Provided b

44、y IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 NOTE Some transmissive parameters common to usual transmitters (receivers) and OATS (OARS) are given in ITU-T G.957. 2 Copyright Electronic Industries All

45、iance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61291-2 O IEC:2000 TIA/EIA-455-223 4 Product specification worksheet for power amplifiers The following worksheet contains a minimum list of specification parameters to be i

46、ncluded in detail specifications of OFA devices to be used as power amplifiers in digital applications, together with their specification criteria (that is in terms of maximum value, minimum value or both) and the indication of the corresponding standard test method. Minimum list of relevant paramet

47、ers of power amplifiers to be specified for digital applications Param et ers Unit Minimum Maximum value value + Test method Transmission characteristics Input power range dBm IEC 61290-2 series Output power range dBm + IEC 61290-2 series IEC 61290-2 series Power wavelength band nm Signal-spontaneou

48、s noise figure dB IEC 61290-3 series Polarization dependent gain dB IEC 61290-1 series Reverse amplified spontaneous emission power level dBm Na I IEC 61290-3 series I n p ut ref1 ectan ce dB Na I IEC 61290-5 series Maxim um reflectance tolerable at input dB Na I IEC 61290-5 series Maxim um reflecta

49、nce tolerable at output dB IEC 61290-5 series Pump leakage to input dBm IEC 61290-6 series Pump leakage to output dBm IEC 61290-6 series Maximum total output power dBm IEC 61290-2 series Small-signal gain dB I Na IEC 61290-1 series I EC 60825- 1 Under consideration Environmental reliability and safety parameters + Safety laser classification Operating temperature “C Maximum