ANSI TIA EIA 568-B-3-2000 Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling《4对100欧姆5类电缆敷设传输性能规范》.pdf

1、ANSI/TIA/EIA-568-B.3-2000 Approved: March 30, 2000 TIA/EIA STANDARD Optical Fiber Cabling Components Standard TINEIA-568-B.3 (Revision of TIA/EIA-568-A) APRIL 2000 TELECOMMUNICATIONS INDUSTRY ASSOCIATION “.” Representing the telecommunications indushy in association with the Electronic Industries Al

2、liance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TWEIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunder

3、standings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect pre

4、clude any member or nonmember of TWEIA fiom manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TWEIA members, whether the standard is to be used either domest

5、ically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TWEIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the

6、Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of r

7、egulatory limitations before its use. (From Standards Proposal Nos. 3894 and 3894-A, formulated under the cognizance of the TIA TR-42 Committee on User Premises Telecommunications Infiastructure.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2000 Standards and Technology Department 2500 Wils

8、on Boulevard Arlington, VA 2220 1 PRICE: Please refer to current Catalog of PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING All rights reserved Printed in U.S.A. Copyright Tel

9、ecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted

10、without license from IHS-,-,-TINEIA-568-B.3 TINEIA-568-B.3 Optical Fiber Cabling Components Standard Draft 14.0 March 6, 2000 NOTICE: This contribution has been prepared to assist the TR-42 Standards Committee. It is offered to the Committee as a basis of discussion and is not a binding proposal on

11、the members of the TR-42.8. The proposed requirements presented in this document are subject to change in form and technical content after more study. Members of the TR-42.8 specifically reserve the right to add to, or revise, the statements contained herein. This document is a working draft for rev

12、iew and use by the TR-42.8 members only. It is intended to serve as the basis for discussion and further development of the TINEIA-568-B.3 Optical Fiber Cabling Components Standard. Intellectual Property Statement The individuals preparing this contribution do not know of patents, the use of which m

13、ay be essential to i standard resulting in whole or part from this contribution. Copyright Statement The contributors grants a free, irrevocable license to the Telecommunications Industry Association (TIA) tc incorporate text contained in this contribution and any modifications thereof in the creati

14、on of a TIA standards publication; to copyright in TIAs name any standards publication even though it may include portions of this contribution; and at TIAs sole discretion to permit others to reproduce in whole or in part the resulting TIA standards publication. NOTE: This document is copyright pro

15、tected and shall not be reproduced in whole or in part without the permission of the Telecommunications Industry Association. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Cop

16、yright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 OPTICAL FIBER CABLING COMPONENTS STANDARD Table of Contents 1 . INTRODUCTION 1 1.1 Purpose 1 1.2 Specification of cri

17、teria . 1 1.3 Metric equivalents of US customary units . 1 1.4 Life of the Standard 1 2 . SCOPE . 2 2.1 Applicability . 2 2.2 Normative references 2 3 . DEFINITIONS. ABBREVIATIONS AND ACRONYMS. UNITS OF MEASURE 3 3.1 General . 3 3.1.1 Definitions 3 3.1.2 Abbreviations and acronyms . 6 3.1.3 Units of

18、 measure . 6 4 . OPTICAL FIBER CABLES 7 4.1 General . 7 4.2 Cable transmlsslon performance 7 4.3 Physical cable specifications 7 4.3.1 Inside plant cable specifications . 7 4.3.2 Outside plant cable specifications . 8 4.3.2.1 Drop cable . 8 5 . CONNECTING HARDWARE 9 5.1 General . 9 5.2 Connector and

19、 adapter . 9 5.2.1 Physical design 9 5.2.2 Performance . 9 5.2.3 Multimode and singlemode identification 9 5.2.4 Keying and labeling . 9 5.2.4.1 568SC Connector . 9 5.2.4.2 Other duplex connectors . 10 5.3 Telecommunications outlet box . 10 5.4 Patch panels . 10 5.4.1 Mounting 10 5.4.2 Mechanical te

20、rmination density 10 5.4.3 Design . 11 5.5 Connecting hardware for centralized cabling . 11 5.6 Optical fiber splice . 12 6 . PATCH CORDS . 13 6.1 General . 13 6.2 Patch cord cable 13 6.3 Patch cord connectors . 13 6.4 Termination configuration 13 7 . FIELD TEST INSTRUMENTS 14 Copyright Telecommunic

21、ations Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 7.1 Multimode . 14 7.2 Singlemode . 14 ANNEX A (NORMATIVE) OPTICAL FIBER CONNECTOR PERFORMANCE SPECIFICATIONS 15 A . 1 Introduction . 15

22、 A.2 lntermateability requirements 15 A.3 Performance requirements 15 A.3.1 Visual and mechanical inspections: FOTP-13 15 A.3.2 Attenuation: FOTP-171 Methods Al or Dl. or FOTP-34 Method A2 for multimode . 15 FOTP-171 Methods A3 or D3. or FOTP-34 Method B for singlemode . 15 A.3.3 Return loss: FOTP-1

23、07 or FOTP-8 15 A.3.4 Low temperature: FOTP-188 . 16 A.3.5 Temperature life: FOTP-4 . 16 A.3.6 Humidity: FOTP-5 . 16 A.3.7 Impact: FOTP-2 17 A.3.8 Strength of coupling mechanism: FOTP-185 17 A.3.9 Durability: FOTP-21 . 17 A.3.10 Cable retention: FOTPB 18 A.3.11 Flex: FOTP-1 19 A.3.12 Twist: FOTP-36

24、. 19 ANNEX B (INFORMATIVE) BIBLIOGRAPHY AND REFERENCES 20 List of Tables Table 1 . Optical fiber cable transmission performance parameters 7 List of Figures Figure 1 . Position A and B configuration of a 568SC . 10 Figure 2 . Optical fiber patch cord 13 II Copyright Telecommunications Industry Assoc

25、iation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 FOREWORD (This foreword is not a part of this Standard.) This Standard was developed by TIA/EIA Subcommittee TR-42.8. Approval of Standard This Standard was

26、approved by TIA/EIA Subcommittee TR-42.8, TIA/EIA Engineering Committee TR-42, and the American National Standards Institute (ANSI). ANSI/TIA/EIA reviews standards every 5 years. At that time, standards are reaffirmed, rescinded, or revised according to the submitted updates. Updates to be included

27、in the next revision should be sent to the committee chair or to ANSI/TIA/EIA. Contributing Organizations More than 30 organizations within the telecommunications industry contributed their expertise to the development of this Standard (including manufacturers, consultants, end users, and other orga

28、nizations). Documents Superseded This Standard replaces, in part, ANSI/EIMIA-568-A, published October, 1995 and TIA TSB-72, published October, 1995. Significant technical changes from the previous edition - This foreword has been changed per the requirements of the TIA style manual. - All definition

29、s have been harmonized across all of TIAS telecommunications infrastructure standards. - Provides performance specifications for 50/125 pm optical fiber cables. - Provides a minimum bend radius and maximum pulling tensions for horizontal cable, inside plant cable, and outside plant optical fiber cab

30、le. - Allows for the use of alternate connector designs in addition to the 568SC. - Provides complete generic performance specifications for optical fiber connectors. - Specifies requirements for connecting hardware in support of centralized cabling. Relationship to other TIA standards and documents

31、 - Commercial Building Telecommunications Cabling Standard, Part 1, General Requirements (ANSl/TlA/EIA-568-B.l); - Commercial Building Standard for Telecommunications Pathways and Spaces (ANSl/TlA/EIA-569-A); - Residential Telecommunications Cabling Standard (ANSl/TlA/EIA-57O-A); - Administration St

32、andard for the Telecommunications Infrastructure of Commercial Buildings (ANSI/TIA/EIA-606); - Commercial Building Grounding and Bonding Requirements for Telecommunications (ANSI/TIA/EIA-607). - Customer-Owned Outside Plant Telecommunications Cabling Standard (ANSl/TlA/EIA-758). . 111 Copyright Tele

33、communications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 The following documents may be useful to the reader: a) National Electrical Safety Code (NESC) (IEEE C 2) b) National Electrical

34、 Code (NEC) (N FPA 70) Useful supplements to this Standard are the Building Industry Consulting Service International (BICSI) Telecommunications Distribution Methods Manual, the Customer-owned Outside Plant Methods Manual, and the Cabling lnstallation Manual. These manuals provide practices and meth

35、ods by which many of the requirements of this standard are implemented. Other references are listed in annex B. Annexes Annex A is normative and is considered a requirement of this Standard. Annex B is informative and not considered a requirement of this Standard. IV Copyright Telecommunications Ind

36、ustry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 1. INTRODUCTION 1 .I Purpose This Standard specifies the component and transmission requirements for an optical fiber cabling system (e.g., cable,

37、 connectors). 50/125 pm and 62.U12.5 pm multimode, and singlemode optical fiber cables are recognized cables. 1.2 Specification of criteria In accordance with EIA Engineering Publication, EP-7B, two categories of criteria are specified; mandatory and advisory. The mandatory requirements are designat

38、ed by the word “shall“; advisory requirements are designated by the words “should“, “may“, or “desirable“ which are used interchangeably in this Standard. Mandatory criteria generally apply to protection, performance, administration and compatibility; they specify the absolute minimum acceptable req

39、uirements. Advisory or desirable criteria are presented when their attainment will enhance the general performance of the cabling system in all its contemplated applications. A note in the text, table, or figure is used for emphasis or offering informative suggestions. 1.3 Metric equivalents of US c

40、ustomary units The majority of the metric dimensions in this Standard are soft conversions of US customary units; e.g., 100 millimeters (mm) is the soft conversion of 4 inches (in). 1.4 Life of the Standard This Standard is a living document. The criteria contained in this Standard are subject to re

41、visions and updating as warranted by advances in building construction techniques and telecommunications technology. 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568

42、-B.3 2. SCOPE 2.1 Applicability This Standard specifies minimum requirements for optical fiber components used in premises cabling, such as cable, connectors, connecting hardware, patch cords and field test equipment. 2.2 Normative references The following standards contain provisions that, through

43、reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision; parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the

44、 standards indicated. ANSI and TIA maintain registers of currently valid national standards published by them. ANSI/EIIA-455-A-1991, Standard Test Procedures for Fiber Optic Fibers, Cables and Transducers, Sensors, Connecting and Terminating Devices, and other Fiber Optic Components ANSIACEA S-83-59

45、6-1 994, Fiber Optic Premises Distribution Cable ANSIACEA S-87-640-2000, Fiber Optic Outside Plant Communications Cable ANSl/TlA/EIA-526-7-1998, Optical Power Loss Measurements of Installed Single-mode Fiber Cable Plant-OFSTP-7 ANSl/TlA/EIA-526-14-A-l998, Optical Power Loss Measurements of Installed

46、 Multimode Fiber Cable Plant OFSTP-14A ANSI/TIA/EIA-568-B.l, Commercial Building Telecommunications Cabling Standard: Part 1, General Requirements NOTE: - The Commercial Building Telecommunications Cabling Standard: Part 1, General Requirements was under development at the time of this Standard bein

47、g approved and is expected to be published as ANSI/TIA/EIA-568-B-l. ANSI/TIA/EIA-598-A-l995, Optical Fiber Cable Color Coding ANSl/TlA/EIA-604-3-1997, FOCIS 3 Fiber Optic Connector lntermateability Standard ANSI/TIA/EIA-606-1993, Administration Standard For The Telecommunications Infrastructure Of C

48、ommercial Buildings 2 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TINEIA-568-B.3 3. DEFINITIONS, ABBREVIATIONS AND ACRONYMS, UNITS OF MEASURE 3.1 General This clause contain

49、s definitions of terms, acronyms, and abbreviations that have a special meaning or that are unique to the technical content of this Standard. The terms that are used in only one clause may be defined within, and at the beginning of, that clause. 3.1 .I Definitions The generic definitions in this subclause have been formulated for use by the entire family of telecommunications infrastructure s