ANSI TIA EIA-136-740-2001 TDMA Third Generation Wireless - System Assisted Mobile Positioning Through Satellite (SAMPS) Teleservices.pdf

1、ANSI/TIA/EIA-136-740-2001 Approved: April 23, 2001 TIA/EIA STANDARD TDMA Third Generation Wireless - System Assisted Mobile Positioning Through Satellite (SAMPS) Teleservices TIA/EIA- 136-740 APRIL 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Tlie Telecoininiiiiicatioiis Industry Association represe

2、nts tlie communications sector of NOTICE TIMEIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in sel

3、ecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIMEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the

4、 existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIMEIA in accordance with the American National Standards Institute (AN

5、SI) patent policy. By such action, TMEIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Note: use of one or more inventions covered by patent rights. By publication of this standard, Interim Standard, or

6、TSB, no position is taken with respect to the validity of those claims or of any patent rights in connection therewith. The patent holder(s) so far identijed have, however, $led statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to

7、 applicants desiring to obtain such licenses. Details rnay be obtained from the standards developer. The user S attention is called to the possibility that compliance with this document rnay require This Standard does not purport to address all safety problems associated with its use or all applicab

8、le regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposals Nos. 4027-740 and 4027-740+1, formulated under the cognizance

9、of the TIA TR- 45.3 Subcommittee on Time Division Digital Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlingon, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENG

10、INEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. Foreword This document references publications developed by ETSI (European Telecommunications Standards Institute). These referenced publicat

11、ions are freely available at http:/www.etsi.org. THIS PAGE INTENTIONALLY LEFT BLANK TINEIA-I 36-740 Contents I 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 1 . 2 . 3 . 4 . Introduction . 1 1.1 Protocol Hierarchy 1 1.2 SAMPS TS Address Hand

12、ling 2 1.3 Mobile Station SAMPS Capabilities 1.3.1 MS-Based GPS (PCF in MS) 1.3.2 MS-Assisted GPS (PCF in NW) . 3 1.3.3 Optional Mobile Station SAMPS Capabilities . 3 Basic Operations 4 2.1 Positioning Assistance Data Broadcast . 4 2.2 Mobile Terminated Positioning Request Procedure 4 2.3 Mobile Ori

13、ginated Positioning Assistance Request Procedure 6 2.4 Autonomous Mobile Originated Positioning Delivery Procedure . 7 2.5 Mobile Originated Positioning Request Procedure . 7 2.5.2 Home SAMPS TS Procedure . 8 2.5.3 Target MS Procedure . 8 2.6 Emergency Position Report Procedure 9 SAMPS Message Set 1

14、0 3.1 Broadcast Message Set 12 3.1.1 Positioning Assistance Data . 13 3.2 Point-to-point Message Set 13 3.2.1 Measure Position Request 14 3.2.2 Measure Position Response 16 3.2.3 Positioning Assistance Request 17 3.2.4 Positioning Assistance Response 18 3.2.5 Autonomous Position Response . 19 3.2.6

15、MO Position Request 19 3.2.7 MO Position Response . 20 3.2.8 Emergency Position Report 20 2.5.1 Requesting MS Procedure 7 . Information Element Description . 22 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 . Acquisition Assistance 22 Almanac 23 Almanac and Other Data . 23 DCCH Identity 24 Deferred Response Reque

16、st 24 DGPS Corrections . 26 DTC Identity . 26 Ephemeris and Clock Correction Data 26 TINEIA-1 36-740 I 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.2

17、5 4.26 4.27 4.28 4.29 4.30 GPS Measurement Data . 28 . 29 GPS TOW Assist . Ionospheric Model . Multiple Positioning Results Request Navigation Model . Navigation Model Requested . 31 Position Information. . . 32 Positioning Client Identity 33 Preferred Type of Positioning QoS Parameters . Real-Time

18、Integrity . . 34 Reference Location . Requesting MS Identity SAMPS Error Code . SAMPS Message Reference . 30 35 . 36 SAMPS Message Type Indicator . 37 UTC Model . . 38 5. Information Element Field Description . 39 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 5.14 5.15 5.16 5.17 5.18 5.19

19、Alnlanac and Other Data Details . . 39 Alnlanac Information. . DGPS Information 40 GPS Acquisition Assist . . 40 GPS Measurement Information GPS TOW Assist Details GPS TOW DGPS . Ionospheric Model Info Measurement Time . . 43 Multilingual Address Info Satellite Navigation Model and Associated Bits .

20、 . 45 Satellite Status . SatlD 47 S tatudaealth . TDMA Time . 48 WNa 49 42 Reference Time Info . . II TINEIA-I 36-740 I 6 . SAMPS Timers 50 2 7 . References 51 3 8 . Change History for TIA/EIA-136-740 . 52 . 111 TINEIA-I 36-740 I Tables 2 3 Table 1 Parameter Type Coding for Optional Information Elem

21、ents 11 Table 2 Procedure Timers . 50 4 iv TINEIA-I 36-740 I Figures 2 Figure 1 Protocol Hierarchy for SAMPS 1 V TINEIA-I 36-740 THIS PAGE INTENTIONALLY LEFT BLANK vi I SAMPS k SAMPS TSAR b TSAR (Conditional) TINEIA-I 36-740 R-DATA Layers 1 & 2, Point-to-Point 4 b and Broadcast 1. In trod uction R-D

22、ATA * * Layers 1 & 2, Point-to-Point * 4 b * and Broadcast 8 9 10 II 12 13 The System Assisted Mobile Positioning through Satellite (SAMPS) Teleservice defies the procedures and signaling for a handset-based positioning service. SAMPS supports various location-based services. SAMPS addresses subscri

23、ber-positioning requirements in TIA/EIA- 136-based networks by utilizing the existing Global Positioning System (GPS) infrastructure. SAMPS utilizes the data capabilities of TIA/EIA-136 networks to enhance the performance of GPS-equipped Mobile Stations (MSs) by providing “GPS assistance”. 1 .I Pro

24、toco I H e rarc h y The protocol hierarchy for SAMPS is defied in the following figure. The SAMPS capable MS communicates with the SAMPS Teleservice Server (SAMPS TS) by using the SAMPS Teleservice. Notice that there is both a point-to-point component and a broadcast component to the SAMPS Teleservi

25、ce. Figure 1 Protocol Hierarchy for SAMPS Mobile Station BMI SAMPS TS 14 15 16 17 18 19 20 21 22 23 24 25 Note: TSAR is the Teleservice Segmentation and Reassembly (see TIA/EIA- 136-620). It provides segmentation and re-assembly services, as well as compression and encryption and is conditionally us

26、ed when needed by SAMPS. Note *: beyond the scope of this standard. There are two types of SAMPS TSs. The Serving SAMPS TS provides the SAMPS capable MS with GPS Assistance. The Home SAMPS TS contains subscription and authorization related information. The communication between the Serving SAMPS TS

27、and the Home SAMPS TS is beyond the scope of this standard. For information about the network reference model used for SAMPS (when SAMPS is used for emergency calls), see TIA/EIA/IS-J-STD-036 5. 1 TINEIA-I 36-740 I 1.2 SAMPS TS Address Handling The MS shall determine the correct Multilingual Teleser

28、vice Server Address to use in mobile originated teleservice messages by the following rules. 2 3 For a mobile terminated procedure, the MS shall use the SAMPS TS address indicated in the Multilingual Teleservice Server Address of the initially received R-DATA message of the mobile terminated procedu

29、re. This Multilingual Teleservice Server Address also applies to all deferred responses to the procedure. This Multilingual Teleservice Server Address shall be used by mobile originated positioning assistance request procedures started in support of the mobile terminated procedure (including deferre

30、d procedures). For a mobile originated procedure, if the MS desires to send a message to the Serving SAMPS TS, and it has not been provided with a Multilingual Teleservice Server Address for the Serving SAMPS TS, then it shall use the Designated SAMPS TS Address. 10 II 12 The MS shall use the stored

31、 Home SAMPS TS Address to contact the Home SAMPS TS in mobile originated procedures. Any SAMPS Multilingual Teleservice Server Address that is downloaded via OATS (see TIMEIA-136-720) or stored in the R-UIM (see TIA/EIA-136-033) shall be considered the Home SAMPS TS Address. 13 14 15 16 The Designat

32、ed SAMPS TS Address is a Multilingual Teleservice Server Address that provides a generic address for the Serving SAMPS TS. It is sent in the R-DATA message and it is coded with the following values: 17 18 19 + The “Type of Number” is set to national number 20 + The “Numbering Plan Identification” is

33、 set to unknown 21 + The “Address Encoding Identifier” is set to TBCD 22 + The “Address” is set to 555 726 7787 23 1.3 Mobile Station SAMPS Capabilities 24 This standard defies several kinds of “GPS assistance” that the TIMEIA-136 network can provide in order to enhance the performance of the GPS-eq

34、uipped MS. 25 26 There are two models of operation. One where the Position Computation Function (PCF) is located in the MS and one where it is located in the Network (NW): 27 28 1. 2. MS-Based GPS (PCF in MS) MS-Assisted GPS (PCF in NW) 29 30 1.3.1 MS-Based GPS (PCF in MS) 31 The MS-based model util

35、izes a traditional GPS receiver in the MS. This model may utilize network assistance. In this case, the SAMPS TS sends one or more assistance 32 33 2 TINEIA-I 36-740 messages, which may help the mobile reduce GPS acquisition time, increase sensitivity, compute satellite position, or improve position

36、 determination accuracy. The MS position is computed in the mobile. The mobile determines what assistance information, if any, to use. If assistance information is not used, the mobile is operating in a stand alone mode. 5 1.3.2 MS-Assisted GPS (PCF in NW) The MS-assisted model utilizes a traditiona

37、l GPS receiver in the MS where the Position Calculation function has been moved to the SAMPS TS. The SAMPS TS sends one or more assistance messages to the MS. This assistance may help the embedded GPS sensor reduce the GPS acquisition time or increase sensitivity. The MS returns the pseudorange data

38、 measured by the GPS sensor to the Serving SAMPS TS. The position of the MS is computed in the SAMPS TS. 12 1.3.3 Optional Mobile Station SAMPS Capabilities 13 14 15 16 17 18 19 20 21 22 The following SAMPS capabilities are optional for MSs that support SAMPS: The capability to determine and send Po

39、sition Information as a stand-alone GPS receiver (MS-Based stand-alone) The capability to determine and send Position Information (MS-Based with network assistance) The capability to determine and send the GPS Measurement Data (MS-Assisted) The capabilities supported by the MS are reported to the ne

40、twork in the Capability Report message, the Origination message (see TIA/EIA-136-123), and the Capability Update Response message (see TIA/EIA-136-133). The capability to determine and send Reference Time for a DCCH 3 TINEIA-I 36-740 I 2. 2 3 4 2.1 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23

41、 24 25 26 27 28 29 30 31 32 33 34 35 36 Basic Operations The following SAMPS message procedures apply to SAMPS message transactions on the DTC and on the DCCH. Positioning Assistance Data Broadcast 2.2 The Positioning Assistance Data message uses the Broadcast Air-Interface Transport Service (BATS),

42、 see TIA/EIA-136-630. The MS may read the Positioning Assistance Data message at any point that it determines appropriate. The MS may also obtain some information from the SAMPS Parameters message on the E-BCCH. Mobile Terminated Positioning Request Procedure The Mobile Terminated Positioning Reques

43、t Procedure is invoked by the MS upon receipt of the Measure Position Request message from the Serving SAMPS TS. This message is used by the Serving SAMPS TS to ask the MS for position information or GPS measurements. It may also be used to ask the MS for reference time for a specific DCCH. The MS m

44、ay use the Preferred Type of Positioning Information Element (IE) to determine what type of response to return in the Measure Position Response message. The MS may use the Positioning Client Identity IE or the absence of that IE to determine whether to respond to the Measure Position Request with a

45、success, request declined indication. If any optional GPS assistance information is included, the MS may read and use it. If the MS accepts the Measure Position Request, and the QoS Parameters IE is included, then the MS shall read it and determine to what level it will comply with the requested QoS

46、. If the Kiwi field of the QoS Parameters IE indicates Do not return a position or measurements if the QoS is not fulfilled and the MS is not fulfilling the QoS parameters, then the MS shall not include the Position Information IE or the GPS Measurement Data IE in the Measure Position Response messa

47、ge and the SAMPS Result IE shall indicate Success, request declined. Optionally, if the MS determines that it needs more GPS Assistance Data, the MS may invoke the Mobile Originated Positioning Assistance Request Procedure before responding to the Measure Position Request message. The MS shall retur

48、n a Measure Position Response message with a result indication. If the Preferred Type of Positioning IE in the Measure Position Request indicated MS- Based GPS and the MS desires to and is able to return the information, the MS shall include either the Position Information IE or the GPS Measurement

49、Data IE in the Measure Position Response message. 4 TINEIA-I 36-740 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 If the Preferred Type of Positioning IE in the Measure Position Request indicated MS- Assisted GPS and the MS desires to and is able to return the information, the MS shall include either the GPS Measurement Data IE or the Position Information IE in the Measure Position Response message. The MS shall always accept and respond to a Measure Position Request which indicates a Public Safety A