ANSI TIA EIA-732-312-2001 Cellular Digital Packet Data (CDPD) System Specification Subnetwork Subprofiles.pdf

1、 TIA/EIA STANDARD Cellular Digital Packet Data (CDPD) System Specification Subnetwork Subprofiles TIA/EIA-732-312 (Upgrade of TIA/EIA/IS-732-312) JULY 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of ANSI/TIA/EIA-732-312

2、-2001 Approved: June 7, 2001 TIA/EIA-732-312 NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purc

3、haser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications,

4、nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American National Standards

5、 Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applica

6、ble regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 4033-312-UG, formulated under the cognizance of the TIA TR

7、-45.6 Subcommittee on Adjunct Data Packet Wireless Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERI

8、NG PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without permission. Organizations may obtain permis

9、sion to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 iTIA/EIA-732-31212345678910111213141516

10、1718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contents1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312-12 X.25-WAN Subprofile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11、 . . . . . . . 312-13 PVC-Frame-Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312-33.1 Point-to-Point (PPP) Subprofile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-33.2 PPP Subprofile . . . . . . . . . .

12、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-44 LAN Subprofile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312-44.1 Logical Link Control Services . . . . . . . . . . . . . . . . . . . . . . . . .

13、 . . . . . . . . . . . . . . . . . . . . . . .312-44.2 CSMA/CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-54.3 FDDI LANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . .312-54.4 Token Ring LANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-64.5 Token Bus LANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、. . . . . . .312-65 CDPD Channel Stream Subprofile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312-65.1 Requirements for Combination with Specific Subnetwork Subprofiles . . . . . . . . . . . . . . .312-75.1.1 CDPD Airlink MAC/Physical Subprofile . . . . . . . . . . . . . . . . . . . .

16、. . . . . . . . . . . . . . . .312-75.1.2 ISO COTS-CLNS Subprofile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-75.1.3 PVC-Frame-Relay Subprofile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312-86 CDPD Air

17、link MAC/Physical Subprofile. . . . . . . . . . . . . . . . . . . . . . . . 312-8TIA/EIA-732-312ii123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960312iii1234567891011121314151617181920212223242526272829303132333435363738394041424344454647

18、48495051525354555657585960TIA/EIA-732-312PART 312 Subnetwork SubprofilesForewordThis foreword is not part of the StandardThis Standard has been produced by the TR-45.6 Subcommittee of the TIA/EIA/TR-45 Committee.This document contains significant portions of material originally submitted by the Cell

19、ular Digital Packet Data Forum Inc.This document set constitutes the Cellular Digital Packet Data (CDPD) System Specification. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used to provide these services consists of radio channels typically used

20、for Advanced Mobile Phone System (AMPS) cellular service.Document StructureThis Standard is published as a series of Parts. Each Part contains information pertaining to one aspect of the system.The functional structure of the Cellular Digital Packet Data System Specification is as follows:a71 Introd

21、uction and OverviewTIA/EIA-732-312 Subnetwork Subprofiles312iv123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960This document provides an overview of the CDPD Network and serves as a guide to the remainder of the system specification for s

22、pecific detailed information.In this Part, design objectives are described and are followed by the design concepts used to realize the stated objectives. The resultant network is then described in terms of its external interfaces, major network elements and network services. A listing of key identif

23、iers in CDPD is then followed by a comprehensive glossary of CDPD terms and a reference list of non-CDPD documents.This Part contains the detailed listing of all Parts of the Cellular Digital Packet Data Specifications.a71 Part 300 to Part 799Protocols and InterfacesThese Parts form the heart of the

24、 CDPD System Specification. They define the communications architecture of CDPD, including communications layer entities, services, protocol stacks, the three key interfaces, Radio Resource Control, Mobility Management, Accounting Management, Support Services and Network Management.a71 Part 800 to P

25、art 899Supplementary Protocol InformationThese Parts contain further specification of the primary CDPD protocols. State transition matrices are used to define protocol state machines, and Protocol Implementation Conformance Statements (PICS) are provided for implementors.a71 Part 900 to Part 999Prot

26、ocol Test SpecificationsFollowing an overview of protocol testing, these Parts contain Abstract Test Suites (ATSs) and Protocol Implementation eXtra Information for Test (PIXIT) for the protocols specified in Part 300 to Part 799.a71 Part 1000 to Part 1999Guidelines for Service ProvidersThese Parts

27、describe guidelines for CDPD Service Providers.3121123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Introduction TIA/EIA-732-312PART 312 Subnetwork Subprofiles1 IntroductionThis Part defines the Cellular Digital Packet Data (CDPD) subnetw

28、ork subprofiles. The CDPD Service Provider must select one subprofile from among this set for each real subnetwork interface of a system. These technologies exhibit physical, functional, performance, and cost differences that render some subprofiles more appropriate than others for particular uses.O

29、ther subnetwork technologies (subprofiles) may be used to meet specific deployment requirements. In such cases the CDPD Service Provider must provide proper specification, including conformance requirements, to ensure procurement of an effective product. That is, a product capable of supporting the

30、selected CDPD lower layer subprofiles and interoperating with all systems to be attached to the subnetwork.The primary reference for this Part is the Industry/Government Open System Specification IGOSS-1. The primary reference for the protocols in this Part is the Stable Implementation Agreements fo

31、r Open Systems Interconnection Protocols OIW-1.2 X.25-WAN Subprofile Figure 312-1 depicts the subprofile applicable to the use of X.25 to interface with Wide Area Network (WAN) packet-switching services.TIA/EIA-732-312 Subnetwork Subprofiles31221234567891011121314151617181920212223242526272829303132

32、33343536373839404142434445464748495051525354555657585960The elements of ISO8208 applicable for use depend upon the CDPD role in which the X.25 PLP is used (i.e., provision of the connection-oriented network service CONS or support of the ISO Connectionless Network Protocol CLNP). This subprofile sta

33、tes the role independent of requirements for X.25 WAN interfaces. Additional role dependent requirements are specified in the CDPD lower layer subprofiles.The X.25-WAN subprofile requires the following:a71 The X.25 PLP ISO8881 and LAPB shall be provided as specified by IGOSS-1a71 The CDPD Service Pr

34、ovider must specify the desired physical interface standards (protocol and connector) for each interface.This subprofile does not mandate any specific physical interface standard. However, the following interfaces are recommended. The three standards most commonly used in conjunction with X.25 are a

35、s follows: a71 Electronic Industries Association (EIA) RS-232-C for line speeds up to 19.2 kilobits/second a71 V.35 CCITT-V.35 for line speeds above 19.2 kilobits/second a71 EIA RS-530 for transfer rates above 20 kilobits/second.FIGURE 312-1 X25-WAN SubprofileX.25 Packet LayerProtocol(ISO 8208)HDLC

36、LAPB(ISO 7776)X.21, X.21 bis,V.35, V.24,NetworkLayerData LinkLayerPhysicalLayerCDPD LowerLayerSubprofilesX.25-WANRS 232C, RS 5303123PVC-Frame-Relay TIA/EIA-732-3121234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859603 PVC-Frame-RelayFigure 31

37、2-2 depicts the subprofile for data transfer and local management status and control information between user equipment and frame relay Permanent Virtual Circuit (PVC) network services. The protocols for the access and provision of frame relay data transfer services shall be provided according to IG

38、OSS-1. 3.1 Point-to-Point (PPP) SubprofileFigure 312-3 depicts the CDPD subprofile choices for interfaces that support CLNS protocols directly over point-to-point data links. The CDPD Service Provider must select the basic data link procedures (LAPB or PPP) and the specific physical interface standa

39、rds to be provided. These subprofiles do not mandate any specific physical interface standard. However, the following interfaces are recommended. The standards commonly used in conjunction with point-to-point links are as follows: a71 Electronic Industries Association (EIA) RS-232-C a71 CCITT V.32 a

40、71 CCITT V.42 a71 CCITT V.35 a71 EIA RS-530. FIGURE 312-2 PVC-Frame Relay SubprofileMultiprotocolEncapsulation(T1.617 Annex F)Core Aspects of Frame Protocol(T1.618 CA)T1.403, V.35, RS-422G.703, G.704, X.21NetworkLayerData LinkLayerPhysicalLayerCDPD LowerLayerSubprofilesPVC-FrameRelayPVC Management(T

41、1.617 Annex D)TIA/EIA-732-312 Subnetwork Subprofiles31241234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859603.2 PPP SubprofileThe Point-to-Point (PPP) subprofile requires that:a. The Point-to-Point Protocol shall be provided as specified in

42、RF-1171. The PPP OSI Network Layer Control Protocol shall be provided as specified in RFC1377.b. The CDPD Service Provider shall specify the desired physical interface standards (protocol and connector) for each interface. 4 LAN SubprofileFigure 312-4 depicts the Local Area Network (LAN) subprofile

43、as a possible subnetwork technology used in the CDPD Network. Other LAN subnetwork technologies may be selected by the service provider.4.1 Logical Link Control ServicesAll LAN subprofiles shall provide Logical Link Control services through the support and use of the Logical Link Control Type 1 proc

44、edures as specified FIGURE 312-3 Point-to-Point SubprofileX.21, X.21 bisV.35, RS-232CData LinkLayerPhysicalLayerCDPD LowerLayerSubprofilesPtPt(PPP)PPP + PPP Network LayerControl Protocol(RFCs: 1171, 1172, 1377)HDLC(ISO 3309, ISO 3309/Ad1)3125LAN Subprofile TIA/EIA-732-3121234567891011121314151617181

45、92021222324252627282930313233343536373839404142434445464748495051525354555657585960in Part 2 clause 5.1 of the Workshop Agreements. For each LAN interface, the service provider must select from the following standard LAN technologies.4.2 CSMA/CDCSMA/CD LAN interfaces shall be provided as specified i

46、n ISO-8802-3 and Part 2 clause 5.2 of the Workshop Agreements. The service provider shall specify the Physical Media Dependent (PMD) characteristics of the interface (10Broad36, 10BaseT, 10Base2 or 10Base5).4.3 FDDI LANsIf selected, FDDI LAN interfaces shall be provided as specified in ISO-9314 and

47、Part 2 clause 5.5 of the Workshop Agreements. To define an effect FDDI procurement, the service provider acquisition authority must specify the PMD characteristics and Station Management (SMT) requirements for the FDDI interface. IGOSS-1 identifies issues that must be addressed in making this select

48、ion. Compliance to IGOSS-1 FDDI PMD variants and FDDI Station Management requirements is mandated.FIGURE 312-4 LAN Subprofile10Broad3610Base2Data LinkLayerPhysicalLayerCDPD LowerLayerSubprofilesLANLogical Link Control Type 1(ISO 8802-2)10BaseT10Base5CSMA/CD(ISO 8802-3)Single ModeFDDI10 MbpsToken Bus

49、Fiber, Multi-Mode Fiber(ISO 9314-3,4)(ISO 9314-2,1)Broadband10 Mbps Fiber5 Mbps Fiber5 Mbps Carrier(ISO 8802-4)4 Mbps16 MbpsToken Ring(ISO 8802-5)TIA/EIA-732-312 Subnetwork Subprofiles31261234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859604.4 Token Ring LANsIf selected, token ring interfaces shall be provided as specified in ISO5 and Part 2 clause 5.4 of the Workshop Agreements. The service provider shall specify PMD characteristics of the interface ISO-8802-5.All to