ANSI TIA-1005-A-1-2015 Telecommunications Infrastructure Standard for Industrial Premises Addendum 1- M12-8 X-Coding Connector (Addendum to TIA-1005-A).pdf

1、 TIA-1005-A-1 (Addendum to TIA-1005-A) January 2015Telecommunications Infrastructure Standard for Industrial Premises Addendum 1- M12-8 X-Coding Connector ANSI/TIA-1005-A-1-2015 APPROVED: JANUARY 7, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest thro

2、ugh eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publication

3、s shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or interna

4、tionally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication

5、. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations b

6、efore its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-1005-A-1, formulated under the cognizance of the TIA TR-42 Telecommunications Cab

7、ling Systems, TR-42.9 Subcommittee on Industrial Telecommunications Infrastructure (1005). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNIC

8、ATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TI

9、A. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for

10、 details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or a

11、ny other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or m

12、ore parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to,

13、and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or co

14、nditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by ano

15、ther organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for Ameri

16、can National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National St

17、andards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent appl

18、ications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUD

19、ING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES F

20、OR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH T

21、HE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PRO

22、FITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AN

23、D THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-1005-A-1 TELECOMMUNICATIONS INFRASTRUCTURE STANDARD FOR INDUSTRIAL PREMISES ADDENDUM 1 M12-8 X-Coding Connector Table of Contents 1 SCOPE . 1 2 NORMATIVE REFERENCES . 1 3 DEFINITION, ACRONYMS AND ABBREVIATIONS 1 4 INDU

24、STRIAL CONNECTING HARDWARE . 1 4.1 General 1 4.2 Telecommunications outlet (TO) . 1 4.2.1 Four-pair M12-8 X-Coding connector . 1 List of Figures Figure 1 Plug and jack side wiring M12-8 X-Coding . 2 List of Tables Table 1 Mapping of modular connector pin/pair assignments to M12-8 pin numbers . 2 ANS

25、I/TIA-1005-A-1 ii FOREWORD TIA standards documents are developed within the Technical Committees of the TIA and the standards coordinating committees of the TIA standards board. Members of the committees serve voluntarily and without commission. The companies that they represent are not necessari-ly

26、 members of the TIA. The standards developed within the TIA represent a consensus of the broad expertise on the subject. This expertise comes from within the TIA as well as those out-side of the TIA that have an expressed interest. The viewpoint expressed at the time that this standard was approved

27、was from the editors experience and the state of the art at that time. Users are encouraged to verify that they have the latest revision of the standard. This Addendum has been prepared by the TR-42.9 subcommittee and approved by TR-42.9 and the TR-42 Engineering Committee and the American National

28、Standards Institute (ANSI). There are no annexes in this Addendum. ANSI/TIA-1005-A-1 1 1 SCOPE This Addendum specifies the electrical and mechanical requirements for an M12-8 X-Coding connector with Category 6A performance. 2 NORMATIVE REFERENCES The following standards contain provisions which, thr

29、ough reference in this text, constitute pro-visions of this Addendum. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Addendum are en-couraged to investigate the possibility of applying the most recent edit

30、ions of the standards indi-cated below. ANSI and TIA maintain registers of currently valid national standards published by them. IEC 60512-29-100:2014, Connectors for electronic equipment Tests and measure-ments Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors Tests 29a to 2

31、9g IEC 61076-2-109:2014, Connectors for electronic equipment Product requirements Part 2-109: Circular connectors Detail specification for connectors M12 x 1 screw-locking, for data transmissions with frequencies up to 500 MHz 3 DEFINITION, ACRONYMS AND ABBREVIATIONS Definitions, acronyms and abbrev

32、iations from ANSI/TIA-1005-A apply to this Addendum. 4 INDUSTRIAL CONNECTING HARDWARE 4.1 General Connecting hardware shall conform to ANSI/TIA-568-C.0, unless otherwise specified in this Standard. 4.2 Telecommunications outlet (TO) Connecting hardware used for balanced twisted-pair cabling within T

33、Os serving automation is-lands (into and within) shall use one of the following: Eight-position modular connector as specified in ANSI/TIA-568-C.2. Two-pair M12-4 D-Coding connector as specified in ANSI/TIA-1005-A Four-pair M12-8 X-Coding as specified in 4.2.1 4.2.1 Four-pair M12-8 X-Coding connecto

34、r M12-8 X-Coding connector as specified in IEC 61076-2-109 may be used. This connector shall meet or exceed the category 6A performance as specified in IEC 61076-2-109 when tested in accordance with IEC 60512-29-100. M12-8 X-Coding is sealed by design. Figure 1 shows the pin assignment and Table 1 s

35、hows the wiring color code for this connector. ANSI/TIA-1005-A-1 2 M12-8 X-Coding Plug M12-8 X-Coding Jack Figure 1 Plug and jack side wiring M12-8 X-Coding Table 1 Mapping of modular connector pin/pair assignments to M12-8 pin numbers M12-8 Pin Number Color Assignment T568B T568B Pair Assignment Co

36、lor Assignment T568A T568A Pair Assignment 1 White Orange 2 White Green 3 2 Orange Green 3 White Green 3 White Orange 2 4 Green Orange 5 White Brown 4 White Brown 4 6 Brown Brown 7 White Blue 1 White Blue 1 8 Blue Blue THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information

37、 and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology

38、, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).