ANSI TIA-102.AABC-D-1-2016 Project 25 Trunking Control Channel Messages Addendum 1 (Addendum to TIA-102.AABC-D).pdf

1、 TIA-102.AABC-D-1 (Addendum to TIA-102.AABC-D) November 2016Project 25 Trunking Control Channel Messages Addendum 1 ANSI/TIA-102.AABC-D-1-2016 APPROVED: NOVEMBER 7, 2016 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings

2、between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclud

3、e any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publicatio

4、ns are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport t

5、o address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademar

6、ks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.AABC-D-1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio TR-8.10 Subcommitte

7、e on Trunking and Conventional Control). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEER

8、ING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard

9、copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are

10、 located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, mo

11、dified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation

12、for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inq

13、uire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA

14、 does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the for

15、mulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any

16、 duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and

17、published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor complian

18、ce with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CON

19、CERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRE

20、SENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND A

21、LL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON

22、 BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WIT

23、HOUT SUCH LIMITATIONS. TIA-102.AABC-D-1 Foreword (This foreword is not part of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that A

24、PCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the Trunking and Conventional Control Su

25、bcommittee (TR-8.10), and TIA Industry members. The TIA-102.AABC standard describes control channel messages for trunked systems meeting the Project 25 requirements. These definitions are necessary to insure interoperability of trunked radio units. This addendum will become part of the standard TIA-

26、102.AABC. This document is a standard. It presents an overview of trunking messages which was recommended by TIA to APCO/NASTD/FED as being suitable for use as part of their standard for a digital public safety radio system (Project 25). TIA expects that APCO/NASTD/FED shall establish and publish on

27、e or more standards for trunking operation. TIA-102.AABC-D-1 1 Contents INTRODUCTION 2 ADDENDUM SCOPE.2 6.1.6 Emergency Alarm Request (EMRG_ALRM_REQ) (replaces the existing section). 3 FIGURE 6.1.6-1 EMERGENCY ALARM REQUEST3 TABLE 6.1.6-1 EMERGENCY ALARM REQUEST SI-1 MAPPING.4 TABLE 6.1.6-2 EMERGENC

28、Y ALARM REQUEST SI-1 VALUES 4 TABLE 6.1.6-3 EMERGENCY ALARM REQUEST SI-2 VALUES 4 TIA-102.AABC-D-1 2 Introduction The purpose of this addendum is to update information contained in ANSI/TIA-102.AABC-D, “Trunking Control Channel Messages“. This addendum defines proposed enhancements to the Emergency

29、Alarm Request message as described in the Scope below. Addendum Scope This addendum enhances trunking control channel messages as follows: (1) Addition of “Special Information” fields to the EMRG_ALRM_REQ message to convey additional information regarding emergency alarm requests. This document will

30、 only include information relevant to the above-listed functionality. The reader is referred to ANSI/TIA-102.AABC-D for all other pertinent information. The next complete revision of ANSI/TIA-102.AABC will incorporate the changes contained in this addendum. Note that section numbers identified in th

31、is addendum directly translate to section numbers in the ANSI/TIA-102.AABC-D, Trunking Control Channel Messages document. TIA-102.AABC-D-1 3 Addendum changes to TIA-102.AABC-D begin here. 6.1.6 Emergency Alarm Request (EMRG_ALRM_REQ) (replaces the existing section) This is a special status indicatio

32、n typically reserved for the “life threatening“ situation. Octet 0 LB P Opcode Octet 1 Manufacturers ID Octet 2 Special Information 1 (SI-1) Octet 3 Special Information 2 (SI-2) Octet 4 reserved Octet 5 Octet 6 Group Address Octet 7 Octet 8 Source Address Octet 9 Octet 10 TSBK Octet 11 CRC Bit 7 6 5

33、 4 3 2 1 0 Figure 6.1.6-1 Emergency Alarm Request The Opcode field (octet 0, bits 5-0) indicates this is the Emergency Alarm from an identified subscriber unit. This is set to the value of %100111. Special Information 1 (SI-1) and Special Information 2 (SI-2) fields may be used to convey status rega

34、rding emergency alarm requests. The default $00 indicates the emergency alarm request has been generated by pressing of the emergency button or switch. Non-zero values indicate the emergency alarm request has been generated by conditions raised by the SU or its accessories. The default case conforms

35、 to the operation of any SU that does not support non-zero Code values for the EMRG_ALRM_REQ. SI-1 contains flags to indicate “common” codes to aid in interoperability, and availability of Additional Information in SI-2. SI-1 is decomposed as shown in Table 6.1.6-1: Table 6.1.6-1 Emergency Alarm Req

36、uest SI-1 Mapping AC IC6 IC5 IC4 IC3 IC2 IC1 MD 7 6 5 4 3 2 1 0 Bit 0 = MD = %1 to indicate Man-Down condition Bit 1-6 = ICx = %1 for Interoperable Condition x Bit 7 = AC = %1 indicates SI-2 contains Additional Codes TIA-102.AABC-D-1 4 SI-1 common codes are listed in Table 6.1.6-2: Table 6.1.6-2 Eme

37、rgency Alarm Request SI-1 Values SI-1 Value Definition $01 “Man-down” $02 - $FF reserved SI-2 is reserved for additional “common” codes and “user-defined” codes as listed in Table 6.1.6-3: Table 6.1.6-3 Emergency Alarm Request SI-2 Values SI-2 Value Definition $00 - $7F Reserved for common codes $80

38、 - $FF Reserved for user-defined codes THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulato

39、ry analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).