ANSI TIA-102.AABC-D-3-2018 Project 25 Trunking Control Channel Messages Addendum 3- Accessory Sensed Emergency (Addendum to TIA-102.AABC-D).pdf

1、 TIA-102.AABC-D-3 (Addendum to TIA-102.AABC-D) May 2018Project 25 Trunking Control Channel Messages Addendum 3- Accessory Sensed Emergency ANSI/TIA-102.AABC-D-3-2018 APPROVED: MAY 8, 2018 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating

2、misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in a

3、ny respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standa

4、rds and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard

5、does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. A

6、ny use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.AABC-D-3, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio T

7、R-8.10 Subcommittee on Trunking and Conventional Control). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STAN

8、DARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by TIA. Reproduction of these documents e

9、ither in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permissio

10、n. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may

11、be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or

12、investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to inve

13、stigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discr

14、iminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) enga

15、ged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA

16、 disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential

17、Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or mo

18、nitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL

19、WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND

20、MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE

21、 FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHET

22、HER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLIS

23、HED BY TIA WITHOUT SUCH LIMITATIONS. TIA-102.AABC-D-3 Foreword (This foreword is not part of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU p

24、rovides that APCO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the Trunking and Conventio

25、nal Control Subcommittee (TR-8.10), and TIA Industry members. The ANSI/TIA-102.AABC standard describes control channel messages for trunked systems meeting the Project 25 requirements. These definitions are necessary to insure interoperability of trunked radio units. This addendum will become part o

26、f the standard ANSI/TIA-102.AABC. This document is a standard. It presents trunking messages recommended by TIA to APCO/NASTD/FED as being suitable for use as part of their standard for a digital public safety radio system (Project 25). TIA expects that APCO/NASTD/FED shall establish and publish one

27、 or more standards for trunking operation. TIA-102.AABC-D-3 1 Contents INTRODUCTION 2 ADDENDUM SCOPE 2 6.1.6 Emergency Alarm Request (EMRG_ALRM_REQ) 3 TABLE 6.1.6-1 EMERGENCY ALARM REQUEST SI-1 MAPPING 3 TABLE 6.1.6-2 EMERGENCY ALARM REQUEST SI-2 VALUES 3 TIA-102.AABC-D-3 2 Introduction The purpose

28、of this addendum is to update information contained in ANSI/TIA-102.AABC-D, “Trunking Control Channel Messages“. This addendum builds on previous enhancements to the Emergency Alarm Request message as described in the Scope below. Addendum Scope This addendum enhances trunking control channel messag

29、es as follows: (1) Specification of an “Accessory Sensed Emergency” (ASE) bit in the “Special Information 1” (SI-1) field of the EMRG_ALRM_REQ message to convey additional information regarding a specific emergency alarm scenario request. (2) Specification of a “Vest Pierced” code in the SI-2 “Speci

30、al Information 2” (SI-2) field of the EMRG_ALRM_REQ message to convey additional information regarding a specific accessory emergency alarm scenario request. This document will only include information relevant to the above-listed functionality. The reader is referred to ANSI/TIA-102.AABC-D, ANSI/TI

31、A-102.AABC-D-1 and ANSI/TIA-102.AABC-D-2 for all other pertinent information. The next complete revision of ANSI/TIA-102.AABC will incorporate the changes contained in this addendum. Note that section numbers identified in this addendum directly translate to section numbers in the ANSI/TIA-102.AABC-

32、D, ANSI/TIA-102.AABC-D-1 and ANSI/TIA-102.AABC-D-2 Trunking Control Channel Messages and Trunking Control Channel Messages Addendum documents. TIA-102.AABC-D-3 3 Addendum changes to TIA-102.AABC-D-2 begin here. 6.1.6 Emergency Alarm Request (EMRG_ALRM_REQ) Table 6.1.6-1 Emergency Alarm Request SI-1

33、Mapping AC IC6 IC5 IC4 IC3 ASE VSE MD 7 6 5 4 3 2 1 0 Bit 0 = MD = %1 to indicate Man-Down condition Bit 1 = VSE = %1 to indicate Vehicle Sensed Emergency Bit 2 = ASE = %1 to indicate Accessory Sensed Emergency Bit 3-6 = ICx = %1 for Interoperable Condition x Bit 7 = AC = %1 indicates SI-2 contains

34、Additional Codes SI-2 is reserved for additional “common” codes and “user-defined” codes as listed in Table 6.1.6-2: Table 6.1.6-2 Emergency Alarm Request SI-2 Values SI-2 Value Definition $00 Default Value $01 Vest Pierced $02 - $7F Reserved for common codes $80 - $FF Reserved for user-defined code

35、s THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been

36、 enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).