ANSI TIA-102.BAAC-D-2017 Project 25 Common Air Interface Reserved Values.pdf

1、 TIA-102.BAAC-D (Revision of TIA-102.BAAC-C) June 2017Project 25 Common Air Interface Reserved Values ANSI/TIA-102.BAAC-D-2017 APPROVED: JUNE 19, 2017 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacture

2、rs and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non

3、-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by T

4、IA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safet

5、y problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document

6、 are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.BAAC-D-R1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.15 Subcommittee on Co

7、mmon Air Interface). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or

8、call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (i

9、ncluding posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/w

10、ww.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in

11、 the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR co

12、nsisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope

13、 or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or

14、 represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, developmen

15、t or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation

16、to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending pa

17、tent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents

18、 of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY

19、 OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRAN

20、TIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT O

21、R INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT,

22、 BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATION

23、S. TIA-102.BAAC-D i Foreword (This foreword is not part of this document.) This document has been created in response to a request by the Project 25 Steering Committee as provided for in a Memorandum of Understanding (MOU) dated April 1992 and amended December 1993. The MOU states that the Project 2

24、5 Steering Committee shall devise a Common System Standard for digital public safety communications (the Standard) commonly referred to as Project 25 or P25, and that TIA, as agreed to by the membership of the appropriate TIA Engineering Committee, will provide technical assistance in the developmen

25、t of documentation for the Standard. If the abbreviation “P25” or the wording “Project 25” appears on the cover sheet of this document when published that indicates the Project 25 Steering Committee has adopted this document as part of the Standard. The appearance of the abbreviation “P25” or the wo

26、rding “Project 25” on the cover sheet of this document or in the title of any document referenced herein should not be interpreted as limiting the applicability of the information contained in any document to “P25” or “Project 25” implementations exclusively. This document was developed by the TIA T

27、R-8.15 Common Air Interface Subcommittee and provides a specification of the Common Air Interface Reserved Values for TIA-102 Land Mobile Radio systems. The 5thedition (Revision D) of this document revised TIA-102.BAAC-C to address errata comments and align the content with current TR-8 practices. T

28、his document cancels and replaces TIA-102.BAAC-C. There are no annexes in this document. TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In Publishing the Document, TIA disclaims any undertaking to perform any d

29、uty owed to or for anyone. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort has been invested in the preparation of this document to ensure the accuracy of the information it contains. TIA-

30、102.BAAC-D ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document, no position is taken with respect to the validity of those claims or any

31、patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The following patent holders and

32、 patents have been identified in accordance with the TIA intellectual property rights policy: No patents have been identified TIA shall not be responsible for identifying patents for which licenses may be required by this document or for conducting inquiries into the legal validity or scope of those

33、 patents that are brought to its attention. TIA-102.BAAC-D iii Table of Contents 1. Introduction . 1 1.1 Scope . 1 1.2 References . 1 1.2.1 Normative References 1 1.2.2 Informative References 2 1.3 Acronyms and Abbreviations 2 1.4 Definitions . 2 1.5 Conventions . 3 1.5.1 Symbols 3 1.5.2 Default Val

34、ues 3 2. Values 4 2.1 Network Access Code 4 2.2 Link Control Format 4 2.3 Manufacturers ID . 4 2.4 Source and Destination ID 5 2.5 Talk Group ID . 5 2.6 Message Indicator 6 2.7 Key ID . 6 2.8 Algorithm ID 6 2.9 Service Access Point 7 2.10 Emergency Indicator . 7 2.11 Data Unit ID 8 List of Tables Ta

35、ble 1 Fields with Reserved Values . 1 Table 2 Standard NAC Values . 4 Table 3 Standard LCF Values 4 Table 4 Standard Source and Destination ID Values . 5 Table 5 Standard TGID Values 6 Table 6 Standard ALGID Values 6 Table 7 Standard SAP Values 7 Table 8 Emergency Indicator Values 7 Table 9 DUID Val

36、ues 8 TIA-102.BAAC-D iv Revision History Version Date Description Interim Standard 06/02/1994 Initial release of Common Air Interface Reserved Values document Original 04/15/2000 Added Algorithm ID, Service Access Point, and Talk Group ID values to the document; defined Network Access Codes $F7E and

37、 $F7F; defined Emergency Indicator Revision A 12/18/2003 This revision add a Service Access Point value for Sub-Network Dependent Convergence Protocol and defined Data Unit ID values Revision B 05/08/2009 This revision added Service Access Point values for Location Services and Conventional Packet D

38、ata Registration, was modified to specify 16-bit Talk Group ID to 24-bit Conventional Talk Group ID mapping for Message Update and Status Update messages, and added URL for informational reference to the MFID Guide and Assignments Revision C 04/08/2011 This revision modified the Algorithm ID values

39、to provide separate values for 128-bit AES and 256-bit AES Revision D 06/01/2017 This revision addresses errata comments and aligns the document with current TR-8 practices TIA-102.BAAC-D 1 1. Introduction This document is a supplement to the FDMA Common Air Interface 1 and the Two Slot TDMA Common

40、Air Interface 4 that lists the reserved values for information fields. 1.1 Scope The Common Air Interface defines the fields listed in Table 1 below with special reserved values. Table 1 Fields with Reserved Values Name Acronym Size (bits) Network Access Code NAC 12 Link Control Format LCF 8 Manufac

41、turers ID MFID 8 Source ID 24 Destination ID 24 Talk Group ID TGID 16 Message Indicator MI 72 Key ID KID 16 Algorithm ID ALGID 8 Service Access Point SAP 6 Emergency Indicator E 1 Data Unit ID DUID 4 Some of these fields have values that are reserved for future standard definitions. There are also s

42、ome values that are defined for standard operation. 1.2 References The appearance of “Project 25” in references below indicates the TIA document has been adopted by the Project 25 Steering Committee as part of its Project 25 standard, i.e. “the Standard.” 1.2.1 Normative References The following doc

43、uments contain provisions that, through reference in this text, constitute provisions of this document. At the time of publication, the editions indicated were valid. All documents are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility

44、 of applying the most recent editions of the documents indicated below. ANSI and TIA maintain registers of currently valid national standards published by them. 1 TIA-102.BAAA-B, Project 25 FDMA Common Air Interface, ANSI/TIA, June 2017 2 TIA-102.AABC-D, Project 25 Trunking Control Channel Messages,

45、 ANSI/TIA, April 2015 TIA-102.BAAC-D 2 1.2.2 Informative References 3 TIA-102.AABF-D, Project 25 Link Control Word Formats and Messages, ANSI/TIA, April 2015 4 TSB-102.BBAA, Project 25 Two-Slot TDMA Overview, TIA, March 2010 5 TSB-102-C, Project 25 TIA-102 Documentation Suite Overview, TIA, March 20

46、16 6 MFID Assignments, TIA TR-8.15 Subcommittee, January 2016 7 ALGID Value Assignment Guide, TIA TR-8.15 Subcommittee, April 2015 1.3 Acronyms and Abbreviations AES Advanced Encryption Standard ALGID Algorithm ID ANSI American National Standards Institute ARP Address Resolution Protocol DES Data En

47、cryption Standard DUID Data Unit ID E Emergency Indicator FDMA Frequency Division Multiple Access KID Key Identifier LC Link Control LCF Link Control Format MFID Manufacturers ID MI Message Indicator NAC Network Access Code SAP Service Access Point SNDCP Sub-Network Dependent Convergence Protocol SU

48、 Subscriber Unit TDMA Time Division Multiple Access TGID Talk Group ID TIA Telecommunications Industry Association 1.4 Definitions SU See definition in 5 TIA-102.BAAC-D 3 1.5 Conventions The following conventions are utilized in this document. 1.5.1 Symbols If a number is preceded by a “%“, the numb

49、er is interpreted as a binary representation with the appropriate number of symbols. If a number is preceded by a “$“, the number is interpreted as a hexadecimal representation with the appropriate number of symbols. If a number is presented with neither a “%“ or “$“ preceding it, the number is considered as a decimal representation with the appropriate number of symbols. Representative examples follow: %1010 is 4 symbol binary for decimal 10 $0A is 2 symbol hexadecimal for decimal 10 15 is decimal 15 1.5.2 Default Values Some of the f