ANSI TIA-102.BAAD-B-2015 Project 25 Conventional Procedures.pdf

1、 TIA-102.BAAD-B (Revision of TIA-102.BAAD-A) August 2015Project 25 Conventional Procedures ANSI/TIA-102.BAAD-B-2015 APPROVED: JULY 28, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purc

2、hasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of

3、TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accor

4、dance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems

5、associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for in

6、formation purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.BAAD-B, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.15 Subcommittee on Common Air Inter

7、face). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA

8、and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posti

9、ng on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.o

10、rg/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards

11、 development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of pa

12、tents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity o

13、f any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent tha

14、t procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publicati

15、on of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or i

16、nvestigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applicati

17、ons shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Docume

18、nt. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTEN

19、TS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING

20、 THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, AR

21、ISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WAR

22、RANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-102.BAA

23、D-B i Foreword (This foreword is not part of this document.) This document has been created in response to a request by the Project 25 Steering Committee as provided for in a Memorandum of Understanding (MOU) dated April 1992 and amended December 1993. The MOU states that the Project 25 Steering Com

24、mittee shall devise a Common System Standard for digital public safety communications (the Standard) commonly referred to as Project 25 or P25, and that TIA, as agreed to by the membership of the appropriate TIA Engineering Committee, will provide technical assistance in the development of documenta

25、tion for the Standard. If the abbreviation “P25” or the wording “Project 25” appears on the cover sheet of this document when published that indicates the Project 25 Steering Committee has adopted this document as part of the Standard. The appearance of the abbreviation “P25” or the wording “Project

26、 25” on the cover sheet of this document or in the title of any document referenced herein should not be interpreted as limiting the applicability of the information contained in any document to “P25” or “Project 25” implementations exclusively. This document was developed by the TR-8.15 Common Air

27、Interface Subcommittee and provides a specification of the Conventional Procedures for TIA-102 Conventional LMR systems. The 3rdedition (Revision B) of this document revised the Conventional Procedures specific to TIA-102 Packet Data to ensure the procedures are complete in order to facilitate inter

28、operability and the development of packet data test documents. The revision also removed the Packet Data Logical Link Control Procedures which are now published in TIA-102.BAED and incorporated errata updates. This document cancels and replaces TIA-102.BAAD-A. There are four annexes in this document

29、. Annexes A, B, C, and D are informative and are not considered part of this specification. TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In Publishing the Document, TIA disclaims any undertaking to perform an

30、y duty owed to or for anyone. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort has been invested in the preparation of this document to ensure the accuracy of the information it contains. T

31、IA-102.BAAD-B ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document, no position is taken with respect to the validity of those claims or a

32、ny patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The following patent holders

33、and patents have been identified in accordance with the TIA intellectual property rights policy: No patents have been identified TIA shall not be responsible for identifying patents for which licenses may be required by this document or for conducting inquiries into the legal validity or scope of th

34、ose patents that are brought to its attention. TIA-102.BAAD-B iii Table of Contents 1 Introduction . 1 1.1 Scope . 2 1.2 References . 4 1.2.1 Normative References 4 1.2.2 Informative References 4 1.3 Acronyms and Abbreviations 4 1.4 Definitions . 5 1.5 Conventions . 6 1.5.1 Aliases 6 1.5.2 Symbols 6

35、 2 Conventional Channels 7 2.1 Organization of Channels . 7 2.1.1 Formats (Informative) . 7 2.1.1.1 Voice Format (Informative) . 7 2.1.1.2 Data Format (Informative) 7 2.1.1.3 Supplementary Data Format (Informative) . 7 2.2 Channel Discipline for the FNE. 7 2.3 Channel Discipline for the SU . 8 2.4 C

36、all Termination . 8 2.4.1 FNE Transmission Termination 8 2.5 Network Access Code and Repeater Addressing . 9 2.6 Status Symbols. 11 3 Repeater Operation 13 3.1 AFC Operation 15 4 Channel Access Procedures . 16 4.1 Channel Access for Voice Transmission 16 4.2 Transmission of the Conventional TSBK 17

37、4.2.1 Non Emergency Alarm SD Requests . 17 4.2.2 Emergency Alarm SD Requests . 18 4.2.3 Transmission of SD Acknowledgements 20 4.3 FNE Transmission of the Conventional TSBK 21 4.3.1 FNE Transmission of Non Emergency Alarm SD Requests . 21 4.3.2 FNE Transmission of SD Acknowledgements 21 5 Convention

38、al Registration Procedures 22 5.1 Conventional Unit and Group Addressing 22 6 Voice Call Procedures 23 6.1 Routine Group Call Procedures 24 6.1.1 SU to Group Voice Transmission . 24 6.1.1.1 Originating SU Actions . 24 6.1.1.2 FNE Response . 25 TIA-102.BAAD-B iv 6.1.1.3 Receiving Subscriber Unit Acti

39、ons 26 6.1.1.4 Call Termination 28 6.1.1.4.1 FNE Response . 28 6.1.1.4.2 Receiving SU Actions . 28 6.1.2 FNE to Group Voice Transmission . 28 6.2 Emergency Call Procedure . 28 6.2.1 SU to Group Voice Emergency Call Transmission . 29 6.2.1.1 FNE Response to Emergency Call Group Voice Transmission 29

40、6.2.1.2 Receiving Subscriber Unit Actions 29 6.2.1.3 Call Termination 29 6.2.1.3.1 FNE Response . 29 6.2.1.3.2 Receiving SU Actions . 30 6.2.2 FNE to Group Voice Emergency Call Transmission . 30 6.3 All Call (System Wide Call) . 30 6.4 Unit-to-Unit Call Procedure . 30 6.4.1 SU Sourced Unit-to-Unit V

41、oice Transmission . 30 6.4.1.1 Originating SU Actions 30 6.4.1.2 FNE Response . 31 6.4.1.3 Receiving Subscriber Unit Actions 31 6.4.1.4 Call Termination 32 6.4.1.4.1 FNE Response . 32 6.4.1.4.2 Receiving SU Actions . 32 6.4.2 FNE Sourced Unit-to-Unit Voice Transmission . 32 6.5 Unit to PSTN Call Pro

42、cedure 32 6.5.1 Unit to PSTN Service Request 33 6.5.1.1 FNE Response . 33 6.5.1.2 Subscriber Unit Actions . 33 6.5.2 Traffic Channel Maintenance 34 6.5.3 Call Termination 34 6.5.3.1 Subscriber Unit Actions . 34 6.5.3.2 FNE Actions 34 6.6 PSTN to Group Call Procedure . 34 6.6.1 FNE Action 35 6.6.2 SU

43、 Response 35 6.6.3 Conventional Channel Maintenance . 35 6.6.4 Call Termination 35 6.7 PSTN to Unit Call Procedure 35 6.7.1 PSTN to Unit Service Request 35 6.7.1.1 Availability Check on Called Party 35 6.7.2 Traffic Channel Maintenance 36 6.7.3 Call Termination 36 6.7.3.1 Subscriber Unit Actions . 3

44、6 6.7.3.2 FNE Actions 36 7 Conventional Packet Data Procedures . 38 7.1 Channel Access for Packet Data Transmission 38 7.1.1 RECEIVE IDLE State 39 TIA-102.BAAD-B v 7.1.2 RECEIVE FS AND NAC State 39 7.1.3 FS AND NAC SEEK State 39 7.1.4 WAIT RANDOM TIME T_SHORT State . 40 7.1.5 WAIT FOR END OF MICRO-S

45、LOT State . 40 7.1.6 RANDOM BACKOFF DELAY State 40 7.1.7 TRANSMIT PACKET State 40 7.1.8 Channel Access Parameters 40 7.2 Receiver NAC Qualification 41 7.3 Packet Data Conveyance . 41 8 Supplementary Data Procedures 42 8.1 Emergency Alarm Procedures 42 8.1.1 Overview 42 8.1.2 Emergency Alarm Request

46、. 43 8.1.3 Emergency Alarm Cancellation 44 8.2 Call Alert Procedures 44 8.2.1 Initial Call Alert Sourced by a Mobile SU 45 8.2.1.1 Mobile Subscriber Unit Actions . 45 8.2.1.2 FNE Response . 45 8.2.1.3 Initiating Mobile Subscriber Unit Actions 45 8.2.1.4 Target Subscriber Unit Actions . 45 8.2.1.5 FN

47、E Response to ACK_RSP_FNE Sourced by an SU 45 8.2.2 Initial Call Alert Sourced by the FNE 46 8.2.2.1 FNE Actions . 46 8.2.2.2 Target Subscriber Unit Actions . 46 8.2.2.3 FNE Response to ACK_RSP_FNE Sourced by an SU 46 8.3 Radio Check Procedures 46 8.3.1 Initial Radio Check Sourced by the FNE 47 8.3.

48、1.1 FNE Actions . 47 8.3.1.2 Target Subscriber Unit Actions . 47 8.3.2 Initial Radio Check Sourced by a Mobile SU 47 8.3.2.1 Initiating Subscriber Actions . 47 8.3.2.2 Receiving FNE Actions . 48 8.3.2.3 Target Subscriber Unit Actions . 48 8.4 Radio Inhibit Procedures 48 8.4.1 FNE Actions . 49 8.4.2

49、Target Subscriber Unit Actions . 49 8.5 Radio Uninhibit Procedures 50 8.5.1 FNE Actions . 50 8.5.2 Target Subscriber Unit Actions . 50 8.6 Message Update Procedures . 51 8.6.1 Initial Message Update Sourced by a Mobile SU . 51 8.6.1.1 Mobile Subscriber Unit Actions . 51 8.6.1.2 FNE Actions . 51 8.6.1.3 Initiating Mobile Subscriber Unit Actions 51 8.6.1.4 Target Subscriber Unit Actions . 52 8.6.1.5 FNE Response to ACK_RSP_FNE Sourced by an SU 52 TIA-102.BAAD-B vi 8.6.2 Initial Message Update Sourced by the FNE 52 8.6.2.1 FNE Actions 52 8.6.2.2 Target Subscriber Unit Actions . 52 8.6.2