ANSI TIA-41.500-E-2004 Part 500 Wireless Radiotelecommunications Intersystem Operations C Introduction to Signaling Protocols《移动应用程序部分.信令协议的引入》.pdf

1、 TIA-41.500-E (Revision of TIA-41.D) October 2010 Part 500: Wireless Radiotelecommunications Intersystem Operations Introduction to Signaling Protocols ANSI/TIA-41.500-E-2004 APPROVED: APRIL 20, 2004 REAFFIRMATION: SEPTEMBER 1, 2010 NOTICE TIA Engineering Standards and Publications are designed to s

2、erve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of s

3、uch Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, e

4、ither domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adoptin

5、g the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicabilit

6、y of regulatory limitations before its use. (From Standards Proposal No. 3-3590.500-RV5, formulated under the cognizance of the TIA TR-45.2 Subcommittee on Wireless Intersystem Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2002 Standards and Technology Department 2500 Wilson Boul

7、evard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org

8、/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to rep

9、roduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (

10、b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may invol

11、ve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a sta

12、tement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or condi

13、tions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respec

14、ts the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise),

15、 whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Refe

16、rence; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identif

17、ication to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the con

18、tents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INT

19、ELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUC

20、T OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDEN

21、TAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING N

22、EGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-41-500-E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960500-1 MAP PROTOCOL ARCH

23、ITECTUREPART 5001 MAP PROTOCOL ARCHITECTUREThe following figure provides a high-level view of the MAP Protocol Architecture.Figure 1 MAP Protocol ArchitectureThe fundamental division within the architecture is between data transfer services and applicationservices. Application services deal with the

24、 transfer of information, with its associated syntax andsemantics. Data transfer services simply move octets between MAP functional entities via asignaling network.In terms of the Open Systems Interconnection (OSI) Reference Model, defined in the ITU X.200series of recommendations, Application Servi

25、ces encompass the Application, Presentation, Session,and Transport layers. Data Transfer Services cover the Network, Data Link, and Physical layers ofthe model (see Figure 2).DATA TRANSFER SERVICESAPPLICATION SERVICESMAP Signaling Node A MAP Signaling Node Binformation transferdata transferSignaling

26、 NetworkDATA TRANSFER SERVICESAPPLICATION SERVICESTIA-41-500-EMAP PROTOCOL ARCHITECTURE123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960500-2Figure 2 OSI Reference Model RelationshipThis Standard specifies a single set of Application Serv

27、ices (see Figure 3) comprised of the ANSITransaction Capabilities specified in ANSI T1.114, along with TIA-41 application-specific servicescalled the Mobile Application Part (MAP). These services are defined in TIA-41-520-E includingthe qualifications, limitations and exceptions on the use of ANSI T

28、1.114 in this Standard.Figure 3 Application ServicesA choice of two sets of Data Transfer Services is allowed in this Standard.One set is based on the X.25 data communications standard (see Figure 4). The relevant X.25standards, as well as the qualifications, limitations and exceptions on the use of

29、 these standards inTIA-41, are specified in TIA-41-510-E.Application LayerAPPLICATION SERVICESPresentation LayerSession LayerTransport LayerNetwork LayerData Link LayerPhysical LayerDATA TRANSFER SERVICESANSI Transaction CapabilitiesANSI Transaction CapabilitiesApplication LayerPresentation LayerSes

30、sion LayerTransport LayerTransaction Capabilities Application Part (TCAP)APPLICATION SERVICESMobile Application Part (MAP)TIA-41-500-E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960500-3 MAP PROTOCOL ARCHITECTUREFigure 4 X.25-based Data

31、 Transfer ServicesThe other set is SS7-based and is comprised of the SS7 Signaling Connection Control Part (SCCP)plus Message Transfer Part (MTP) (see Figure 5). The qualifications, limitations and exceptions on the use of these standards in TIA-41are specifiedin TIA-41-511-E for ANSI and TIA-41-512

32、-E for ITU-T. Figure 5 SS7-based Data Transfer Services ANSI Transaction CapabilitiesX.25 Network LayerX.25 Data Link LayerX.25 Physical LayerX.25-BASED DATA TRANSFER SERVICESX.25 Signaling NetworkANSI Transaction CapabilitiesMTP Level 3 (part of Network Layer)MTP Level 2 (Data Link Layer)MTP Level 1 (Physical Layer)SS7-BASED DATA TRANSFER SERVICESSCCP (part of Network Layer)SS7 Signaling NetworkTIA-41-500-EMAP PROTOCOL ARCHITECTURE123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960500-4