ANSI TIA-41.550-E-3-2012 Mobile Application Part (MAP)-Parameters Signaling Protocols (Incorporated Addendum to TIA-41.550-E).pdf

1、 TIA-41.550-E-3E (Addendum to TIA-41.550-E) August 2012Mobile Application Part (MAP)- Parameters Signaling Protocols ANSI/TIA-41.550-E-3E-2012 APPROVED: AUGUST 7, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings be

2、tween manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude

3、any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications

4、 are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to

5、address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. SP-

6、3-3590.550-RV5-AD3-E-A, formulated under the cognizance of the TIA TR-45 Mobile and Personal Communications Systems Standards, TR-45.8 Subcommittee on Core Networks- Mobile and Personal Communications Standards). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Departmen

7、t 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standa

8、rds/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions o

9、f this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is

10、no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use o

11、f intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from

12、the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which

13、 are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Docum

14、ent or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether suc

15、h reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii)

16、TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to T

17、IA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the

18、 Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PR

19、OPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE

20、 REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSE

21、QUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF D

22、AMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0004-550-E v4.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960550 -1 GENERALPART 550 1 GENE

23、RALThis specification supports systems conforming to air-interface technologies AMPS, NAMPS,TDMA and CDMA, including cdma2000.11.1 PARAMETER FORMATMAP uses the TCAP parameter format defined in ANSI T1.114.Unless otherwise specified, the least significant bit (LSB) of a parameter, data type or field

24、shall beplaced in the rightmost bit of the highest numbered octet. The most significant bit (MSB) shall beplaced in the leftmost bit of the lowest numbered octet. This applies to fields composed of contiguousor non-contiguous bits.For example, a single octet field will have the LSB in bit A and the

25、MSB in bit H:A 12 bit field occupying octet 1 and bits A-D of octet 2 would have the LSB in bit A of octet 2 andthe MSB in bit H of octet 1:A 6 bit field occupying bits B-G of octet 1 would have the LSB in bit B and the MSB in bit G:Unless otherwise defined, when a field is defined by reference to a

26、nother standard (e.g., CDMA) theoctet numbering should correspond with that standard (i.e., Octet 1 of the field in the referencedstandard should be Octet 1 in this standard). When ordering is not defined explicitly, the order of thefields as listed within the referenced standard should be used. Wit

27、hin each octet, the least significantbit of each field (or portion within this octet) should be in the lowest lettered bit for that field. If thefield does not fill an even number of octets, padding should be added only to the highest numberedoctet defined for the field in this standard, starting wi

28、th bit H. These bits should be treated asReserved (i.e., transmitted as zero bits and ignored on receipt).1cdma2000is the trademark for the technical nomenclature for certain specifications and standards of the OrganizationalPartners (OPs) of 3GPP2. Geographically (and as of the date of publication)

29、, cdma2000is a registered trademark of theTelecommunications Industry Association (TIA-USA) in the United States.HGFEDCBAocteAllowed Call Types 1HGFEDCBAocteMSB 12 Bit Field 1Reserved LSB 2HGFEDCBAocteRsvd MSB 6 Bit Field LSB Rsvd 1X.S0004-550-E v4.0PARAMETER IDENTIFIERS12345678910111213141516171819

30、2021222324252627282930313233343536373839404142434445464748495051525354555657585960550 -21.1.1 Transmission orderOctets are transmitted in sequence, starting with octet 1. Within each octet, bits are transmitted insequence, starting with bit A.1.2 PARAMETER IDENTIFIERSThe following table lists the MA

31、P Parameter Identifiers.Table 1 MAP Parameter Identifiers Parameter Identifier Name Parameter Identifier CodeH G F E D C B AReferenceBillingID 1 0 0 0 0 0 0 1 2.24ServingCellID 1 0 0 0 0 0 1 0 2.235TargetCellID 1 0 0 0 0 0 1 1 2.273Digits 1 0 0 0 0 1 0 0 2.115ChannelData 1 0 0 0 0 1 0 1 2.91InterMSC

32、CircuitID 1 0 0 0 0 1 1 0 2.139InterSwitchCount 1 0 0 0 0 1 1 1 2.140MobileIdentificationNumber 1 0 0 0 1 0 0 0 2.150ElectronicSerialNumber 1 0 0 0 1 0 0 1 2.122ReleaseReason 1 0 0 0 1 0 1 0 2.213SignalQuality 1 0 0 0 1 0 1 1 2.240StationClassMark 1 0 0 0 1 1 0 0 2.265AuthorizationDenied 1 0 0 0 1 1

33、 0 1 2.19AuthorizationPeriod 1 0 0 0 1 1 1 0 2.20SeizureType 1 0 0 0 1 1 1 1 2.224TrunkStatus 1 0 0 1 0 0 0 0 2.300QualificationInformationCode 1 0 0 1 0 0 0 1 2.197FeatureResult 1 0 0 1 0 0 1 0 2.131RedirectionReason 1 0 0 1 0 0 1 1 2.212AccessDeniedReason 1 0 0 1 0 1 0 0 2.1MSCID 1 0 0 1 0 1 0 1 2

34、.161SystemMyTypeCode 1 0 0 1 0 1 1 0 2.270OriginationIndicator 1 0 0 1 0 1 1 1 2.178TerminationRestrictionCode 1 0 0 1 1 0 0 0 2.291CallingFeaturesIndicator 1 0 0 1 1 0 0 1 2.38FaultyParameter 1 0 0 1 1 0 1 0 2.130X.S0004-550-E v4.012345678910111213141516171819202122232425262728293031323334353637383

35、9404142434445464748495051525354555657585960550 -3 PARAMETER IDENTIFIERSReserved 1 0 0 1 1 0 1 1TDMAChannelData 1 0 0 1 1 1 0 0 2.280TDMACallMode 1 0 0 1 1 1 0 1 2.279HandoffReason 1 0 0 1 1 1 1 0 2.135TDMABurstIndicator 1 0 0 1 1 1 1 10 0 0 1 1 1 1 12.278PC_SSN 1 0 0 1 1 1 1 10 0 1 0 0 0 0 02.186Loc

36、ationAreaID 1 0 0 1 1 1 1 10 0 1 0 0 0 0 12.145SystemAccessType 1 0 0 1 1 1 1 10 0 1 0 0 0 1 02.268AuthenticationResponse 1 0 0 1 1 1 1 10 0 1 0 0 0 1 12.15AuthenticationResponseBase-Station1 0 0 1 1 1 1 10 0 1 0 0 1 0 02.16AuthenticationResponseUnique-Challenge1 0 0 1 1 1 1 10 0 1 0 0 1 0 12.18Call

37、HistoryCount 1 0 0 1 1 1 1 10 0 1 0 0 1 1 02.36ConfidentialityModes 1 0 0 1 1 1 1 10 0 1 0 0 1 1 12.95RandomVariable 1 0 0 1 1 1 1 10 0 1 0 1 0 0 02.199RandomVariableBaseStation 1 0 0 1 1 1 1 10 0 1 0 1 0 0 12.200RandomVariableSSD 1 0 0 1 1 1 1 10 0 1 0 1 0 1 02.202RandomVariableUniqueChallenge 1 0

38、0 1 1 1 1 10 0 1 0 1 0 1 12.203ReportType 1 0 0 1 1 1 1 10 0 1 0 1 1 0 02.214SignalingMessageEncryptionKey 1 0 0 1 1 1 1 10 0 1 0 1 1 0 12.238SharedSecretData 1 0 0 1 1 1 1 10 0 1 0 1 1 1 02.237TerminalType 1 0 0 1 1 1 1 10 0 1 0 1 1 1 12.288Table 1 MAP Parameter Identifiers (Continued)Parameter Ide

39、ntifier Name Parameter Identifier CodeH G F E D C B AReferenceX.S0004-550-E v4.0PARAMETER IDENTIFIERS123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960550 -4VoicePrivacyMask 1 0 0 1 1 1 1 10 0 1 1 0 0 0 02.307SystemCapabilities 1 0 0 1 1 1

40、 1 10 0 1 1 0 0 0 12.269DenyAccess 1 0 0 1 1 1 1 10 0 1 1 0 0 1 02.110UpdateCount 1 0 0 1 1 1 1 10 0 1 1 0 0 1 12.302SSDNotShared 1 0 0 1 1 1 1 10 0 1 1 0 1 0 02.263ExtendedMSCID 1 0 0 1 1 1 1 10 0 1 1 0 1 0 12.126ExtendedSystemMyTypeCode 1 0 0 1 1 1 1 10 0 1 1 0 1 1 02.127ControlChannelData 1 0 0 1

41、 1 1 1 10 0 1 1 0 1 1 12.96SystemAccessData 1 0 0 1 1 1 1 10 0 1 1 1 0 0 02.267CancellationDenied 1 0 0 1 1 1 1 10 0 1 1 1 0 0 12.45BorderCellAccess 1 0 0 1 1 1 1 10 0 1 1 1 0 1 02.25CDMAStationClassMark 1 0 0 1 1 1 1 10 0 1 1 1 0 1 12.82CDMAServingOneWayDelay 1 0 0 1 1 1 1 10 0 1 1 1 1 0 02.78CDMAT

42、argetOneWayDelay 1 0 0 1 1 1 1 10 0 1 1 1 1 0 12.88CDMACallMode 1 0 0 1 1 1 1 10 0 1 1 1 1 1 02.55CDMAChannelData 1 0 0 1 1 1 1 10 0 1 1 1 1 1 12.56CDMASignalQuality 1 0 0 1 1 1 1 10 1 0 0 0 0 0 02.79CDMAPilotStrength 1 0 0 1 1 1 1 10 1 0 0 0 0 0 12.69CDMAMobileProtocolRevision 1 0 0 1 1 1 1 10 1 0

43、0 0 0 1 02.65CDMAPrivateLongCodeMask 1 0 0 1 1 1 1 10 1 0 0 0 0 1 12.71Table 1 MAP Parameter Identifiers (Continued)Parameter Identifier Name Parameter Identifier CodeH G F E D C B AReferenceX.S0004-550-E v4.01234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950

44、51525354555657585960550 -5 PARAMETER IDENTIFIERSCDMACodeChannel 1 0 0 1 1 1 1 10 1 0 0 0 1 0 02.59CDMASearchWindow 1 0 0 1 1 1 1 10 1 0 0 0 1 0 12.74MSLocation 1 0 0 1 1 1 1 10 1 0 0 0 1 1 02.165PageIndicator 1 0 0 1 1 1 1 10 1 0 0 0 1 1 12.183ReceivedSignalQuality 1 0 0 1 1 1 1 10 1 0 0 1 0 0 02.20

45、7DeregistrationType 1 0 0 1 1 1 1 10 1 0 0 1 0 0 12.111NAMPSChannelData 1 0 0 1 1 1 1 10 1 0 0 1 0 1 02.167AlertCode 1 0 0 1 1 1 1 10 1 0 0 1 0 1 12.4AnnouncementCode 1 0 0 1 1 1 1 10 1 0 0 1 1 0 02.9AuthenticationAlgorithmVersion 1 0 0 1 1 1 1 10 1 0 0 1 1 0 12.11AuthenticationCapability 1 0 0 1 1

46、1 1 10 1 0 0 1 1 1 02.12CallHistoryCountExpected 1 0 0 1 1 1 1 10 1 0 0 1 1 1 12.37CallingPartyNumberDigits1 1 0 0 1 1 1 1 10 1 0 1 0 0 0 02.40CallingPartyNumberDigits2 1 0 0 1 1 1 1 10 1 0 1 0 0 0 12.41CallingPartyNumberString1 1 0 0 1 1 1 1 10 1 0 1 0 0 1 02.42CallingPartyNumberString2 1 0 0 1 1 1

47、 1 10 1 0 1 0 0 1 12.43CallingPartySubaddress 1 0 0 1 1 1 1 10 1 0 1 0 1 0 02.44CancellationType 1 0 0 1 1 1 1 10 1 0 1 0 1 0 12.46CarrierDigits 1 0 0 1 1 1 1 10 1 0 1 0 1 1 02.47DestinationDigits 1 0 0 1 1 1 1 10 1 0 1 0 1 1 12.113Table 1 MAP Parameter Identifiers (Continued)Parameter Identifier Na

48、me Parameter Identifier CodeH G F E D C B AReferenceX.S0004-550-E v4.0PARAMETER IDENTIFIERS123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960550 -6DMH_RedirectionIndicator 1 0 0 1 1 1 1 10 1 0 1 1 0 0 02.121IntersystemTermination 1 0 1 1 1

49、 1 1 10 1 0 1 1 0 0 12.141AvailabilityType 1 0 0 1 1 1 1 10 1 0 1 1 0 1 02.21LocalTermination 1 0 1 1 1 1 1 10 1 0 1 1 0 1 12.144MessageWaitingNotificationCount 1 0 0 1 1 1 1 10 1 0 1 1 1 0 02.146MobileDirectoryNumber 1 0 0 1 1 1 1 10 1 0 1 1 1 0 12.149MSCIdentificationNumber 1 0 0 1 1 1 1 10 1 0 1 1 1 1 02.162PSTNTermination 1 0 1 1 1 1 1 10 1 0 1 1 1 1 12.195NoAnswerTime 1 0 0 1 1 1 1 10 1 1 0 0 0 0 02.175OneTimeFeatureIndicator 1 0 0 1 1 1 1 10 1 1 0 0 0 0 12.177OriginationTriggers 1 0 0 1 1 1 1 10 1 1 0 0 0 1 02.179RANDC 1 0 0 1 1 1 1 10 1 1 0 0 0 1 12.198RedirectingNumberD