ANSI TIA-41.690-E-1-2012 Mobile Application Part (MAP)-Timers (Addendum to TIA-41.690-E).pdf

1、 TIA-41.690-E-1E (Addendum to TIA-41.690-E) August 2012Mobile Application Part (MAP)- Timers ANSI/TIA-41.690-E-1E-2012 APPROVED: AUGUST 2, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and

2、purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member

3、 of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in a

4、ccordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety probl

5、ems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. SP-3-3590.690-RV5-AD1-E-A,

6、formulated under the cognizance of the TIA TR-45 Mobile and Personal Communications Systems Standards, TR-45.8 Subcommittee on Core Networks- Mobile and Personal Communications Standards). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard

7、Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights

8、reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please

9、contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Do

10、cument will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property

11、rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is re

12、quested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the

13、 parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If

14、the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of

15、mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encourage

16、ment of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essenti

17、al Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIE

18、S, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRE

19、SSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCU

20、MENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUD

21、ING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL

22、ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. REVISION HISTORYRevision Date RemarksX.S0004-690-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-690-E v2.01234567891011121314151617181920212223242

23、52627282930313233343536373839404142434445464748495051525354555657585960690 -1 OPERATION TIMER VALUESPART 690OPERATION TIMER VALUESThe following table provides a summary of the timers used for MAP operations. The timer valuesspecified in this table are default values only and should be optimized for

24、actual operatingenvironments. Some timers are locally defined and are not in this table (e.g., alerting timer, noanswer timer, page response timer, maximum interaction timer, interdigit timer).1 OPERATION TIMER VALUESTable 1 Operation Timer Values Timer Default (sec.)Started when Normally stopped wh

25、en Action when timer expiresADT Authentication Directive Timer6 AuthenticationDirective INVOKE is sent.AuthenticationDirective RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.ADTF Authentication Directive Forward Timer15 AuthenticationDirective-Forward INVOKE is sent.Authentica

26、tionDirective-Forward RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.AFRT Authentication Failure Report Timer6 AuthenticationFailure-Report INVOKE is sent.AuthenticationFailure-Report RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.ANZTAnalyzed Informatio

27、n Timer16 AnalyzedInformation INVOKE (or a subsequent RemoteUserInteraction-Directive RETURN RESULT) is sent, or a subsequent Disconnect-Resource INVOKE is received.AnalyzedInformation RETURN RESULT or RETURN ERROR is received, RemoteUser-InteractionDirective INVOKE is received, or ConnectResource I

28、NVOKE is received.Execute recovery procedures.ART Authentication Request Timer6 AuthenticationRequest INVOKE is sent.AuthenticationRequest RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.ASRRT Authenti-cation Status Report Response Timer24 An Authentication operation that requi

29、res an Authentica-tionStatusReport reply is sent.Authentication Status Report INVOKE is received.Execute recovery procedures.X.S0004-690-E v2.0OPERATION TIMER VALUES123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960690 -2ASRT Authenticatio

30、n Status Report Timer6 AuthenticationStatus-Report INVOKE is sent.Authentication Status Report RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.BDT Bulk Deregis-tration TImer6 BulkDeregistration INVOKE is sent.BulkDeregistration RETURN RESULT or RETURN ERROR is received.Execute

31、recovery procedures.BSCT Base Station Challenge Timer3 (see a)BaseStationChallenge INVOKE is sent.BaseStationChallenge RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.CFTChange Facilities Timer7 ChangeFacilities INVOKE is sent.ChangeFacilities RETURN RESULT or RETURN ERROR is r

32、eceived.Execute recovery procedures.CRT Count Request Timer6 Count Request INVOKE is sent.Count Request RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.CSTChange Service Timer13 ChangeService INVOKE is sent.ChangeService RETURN RESULT or RETURN ERROR is received.Execute recover

33、y procedures.CTT Clear Trunk Timer4 to 15 FacilitiesRelease INVOKE is sent.FacilitiesRelease RETURN RESULT or RETURN ERROR is received.see Part 640, sec. 18.1FAVTFacility Selected And Available Timer16 FacilitySelectedAnd-Available INVOKE is sent.FacilitySelectedAnd-Available RETURN RESULT or RETURN

34、 ERROR is received.Execute recovery procedures.FRRTFeature Request Response Timer16 FeatureRequest INVOKE (or a subsequent Remote-UserInteractionDirective RETURN RESULT) is sent.FeatureRequest RETURN RESULT, FeatureRequest RETURN ERROR, or a RemoteUser-InteractionDirective INVOKE is received.Execute

35、 recovery procedures.FRT Flash Request Timer3 MSC transmits a FlashRe-quest INVOKE.FlashRequest RETURN RESULT or RETURN ERROR is received.see Part 640, sec. 21.1HOT Handoff Order Timer12 (see b)Serving MSC sends FacilitiesDirective INVOKE or HandoffBack INVOKE to Target MSC.FacilitiesDirective or Ha

36、ndoffBack RETURN RESULT or RETURN ERROR is received.see Part 640, sec. 16.1see Part 640, sec. 17.1HTTRT Handoff-To-Third Result Timer7 (see c)Serving MSC receives Handoff-To-Third RETURN RESULT.FacilitiesRelease INVOKE is received.see Part 640, sec. 26.1see Part 640, sec. 27.1Table 1 Operation Timer

37、 Values X.S0004-690-E v2.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960690 -3 OPERATION TIMER VALUESHTTT Handoff-To-Third Timer18 (see b)Handoff-To-Third INVOKE is sent.Handoff-To-Third RETURN RESULT or RETURN ERROR is received.see Pa

38、rt 640, sec. 26.1see Part 640, sec. 27.1IDT InformationDirective Timer6 InformationDirective INVOKE is sent.InformationDirective RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.IFT Information Forward Timer6 InformationForward INVOKE is sent.InformationForward RETURN RESULT or

39、RETURN ERROR is received.Execute recovery procedures.IRTInstruction Request Timer6 InstructionRequest INVOKE (or a subsequent SRFDirective RETURN RESULT) is sent.InstructionRequest RETURN RESULT or RETURN ERROR is received, or SRFDirective INVOKE is received.Execute recovery procedures.ISART Intersy

40、stem Answer Response Timer78 Affirmative InterSystem-Setup RETURN RESULT is received.InterSystem Answer INVOKE is received.Execute recovery procedures.ISAT Intersystem Answer Timer7 InterSystemAnswer INVOKE is sent.InterSystemAnswer RETURN RESULT is received.Execute recovery procedures.ISMDWTIntersy

41、stem Message Delivery Wait Timer7 InterSystemPage2 RETURN RESULT (for an MS responding with an SMS Service Option) is sent.InterSystemSMSDelivery-PointToPoint INVOKE is received.Release MS from the traffic channel and execute recovery procedures.ISPRT Intersystem Page Request Timer13 InterSystemPage

42、 or InterSystemPage2 INVOKE is sent.InterSystemPage or InterSystemPage2 RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.ISSMTIntersystem SMS Delivery Timer24 InterSystemSMSDelivery-PointToPoint INVOKE is sent.InterSystemSMSDelivery-PointToPoint RETURN RESULT or RETURN ERROR is

43、received.Execute recovery procedures.ISSPTInterSystem SMS Page Timer 24(see d)InterSystemSMSPage INVOKE is sent.InterSystemSMSPage RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.ISSRTIntersystem Setup Timer15 IntersystemSetup INVOKE is sent.IntersystemSetup RETURN RESULT or RE

44、TURN ERROR is received.Execute recovery procedures.Table 1 Operation Timer Values X.S0004-690-E v2.0OPERATION TIMER VALUES123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960690 -4ISSWT Intersystem Setup Wait Timer60 InterSystemPage2 RETURN

45、RESULT (for an MS responding with a voice Service Option) is sent.IntersystemSetup INVOKE is received.Execute recovery procedures.LMMRT Location Measurement Maximum Response Timer7 Serving MSC requests handoff measurements from the Candidate MSC.Serving MSC receives handoff measurements from the Can

46、didate MSC.see Part 640, sec. 23.1LRTLocation Request Timer16 LocationRequest INVOKE (or a subsequent Remote-UserInteractionDirective RETURN RESULT) is sent, or a subsequent DisconnectResource INVOKE is received, or when a ConnectionFailure-Report INVOKE is sent.LocationRequest RETURN RESULT, Locati

47、on Request RETURN ERROR, or a RemoteUserInteraction-Directive INVOKE, or a ConnectResource INVOKE is received.Apply appro-priate access denial treatment.MAHT Mobile Access Hunt Timer30 (see e)MAH context is created or extended.MAH context is closed. Release MAH context.MAT Mobile Arrival Timer7 (see

48、 c)Target MSC replies affirmatively to Serving MSC handoff request.Target MSC receives MS on the designated voice channel.see Part 640, sec. 17.3see Part 640, sec. 17.3see Part 640, sec. 22.3see Part 640, sec. 23.3MDTMessage Directive Timer6 MessageDirective INVOKE is sent.MessageDirective RETURN RE

49、SULT or RETURN ERROR is received.Execute recovery procedures.MHOT Mobile Handoff Order7 (see c)Serving MSC receives affirmative reply from Target MSC to handoff request.Target MSC indicates to serving MSC that MS is on channel.see Part 640, sec. 16.1see Part 640, sec. 17.1see Part 640, sec. 23.1see Part 640, sec. 26.4see Part 640, sec. 27.4MSIT MS Inactive TImer6 MSInactive INVOKE is sent. MSInactive RETURN RESULT or RETURN ERROR is received.Execute recovery procedures.MTModify Timer6 Modify INVOKE is sent. Modify RETURN RESULT or RETURN ERROR is received.Execute recovery procedur