1、 TIA STANDARD FOTP-67 IEC-60793-1-51 Optical Fibres Part 1-51: Measurement Methods and Test Procedures Dry Heat TIA-455-67-A (Revision of TIA/EIA-455-67) THIS STANDARDS REPLACES TIA/EIA-455-70) SEPTEMBER, 2003 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in as
2、sociation with the Electronic Industries Alliance ANSI/TIA-455-67-A-2003 Approved: August 26, 2003 Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Pu
3、blications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particu
4、lar need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their volunta
5、ry use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation
6、 whatever to parties adopting the Standard or Publication. Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm This Standard does not purport to address all safety problems associated with its
7、 use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. These Materials are subject to copyright claims of IEC, ANSI, and TI
8、A. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of TIA. All requests pertaining to the FOTP-67-A IEC 60793-1-51: Optical Fibres Part 1-51: Measurement Methods and Test Procedures Dry Heat should be submitted
9、 to TIA. (From Standards Proposal No. 3-2819-RV1, formulated under the cognizance of the TIA FO-4.6 Subcommittee on Optical Fibers.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2003 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to c
10、urrent Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed
11、 in U.S.A. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed (the “Document”) has been prepare
12、d by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Eng
13、ineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the p
14、rocess, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the
15、contents of the Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by on
16、e or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with referenc
17、e to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of com
18、pliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF
19、 ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE C
20、ONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIR
21、ECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAM
22、AGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking pe
23、rmitted without license from IHS-,-,-PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without prior permission of the Telecommunications Industry Association. For information consult our website at http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organ
24、izations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 Copyri
25、ght Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-FOREWARD With the adoption of international standard IEC 60793-1-51 (Optical Fibres Part 1-51: Measurement Methods and Test Procedures Dry Heat)
26、 TIA-455-67-A supercedes the current TIA/EIA-455-67 (FOTP-67 Procedure for Assessing High Temperature Exposure Effects on Optical Characteristics of Optical Fibers), and replaces TIA/EIA-455-70 (FOTP-70 Procedure for Assessing High Temperature Exposure Effects on Mechanical Characteristics of Optica
27、l Fibers). This action was taken under the cognizance of the TIA-FO-4.6 Subcommittee on Optical Fibers. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IEC 60753-1-51 adopted as TIA-455-
28、67-A iCONTENTS FOREWORD.ii INTRODUCTIONiv 1 Scope and object1 2 Normative references .1 3 Apparatus.2 3.1 Chamber .2 3.2 Other apparatus 2 4 Sampling and specimens 2 5 Procedure 3 5.1 Measurements.3 5.1.1 Optical measurements .3 5.1.2 Mechanical measurements .3 5.2 Preconditioning3 5.3 Conditioning
29、4 5.4 Recovery.4 6 Pass/fail criteria4 7 Results.4 7.1 Information to be provided with each test .4 7.2 Information to be provided upon request 5 8 Specification information.5 Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking p
30、ermitted without license from IHS-,-,-IEC 60753-1-51 adopted as TIA-455-67-A iiINTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-51: Measurement methods and test procedures Dry heat FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standa
31、rdization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publis
32、hes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this
33、 preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an inter
34、national consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, tec
35、hnical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any
36、 divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its stand
37、ards. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IEC 60753-1-51 adopted as TIA-455-67-A iii6) Attention is drawn to the possibility that some of the elements of this International S
38、tandard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60793-1-51 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This standard, together with
39、the other standards in the IEC 60793-1-5X series, cancels and replaces the first edition of IEC 60793-1-5, of which it constitutes a technical revision. The text of this standard is based on the following documents: FDIS Report on voting 86A/678/FDIS 86A/702/RVD Full information on the voting for th
40、e approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. IEC 60793-1-5X consists of the following parts, under the general title: Optical fibres: Part 1-50: Measurement methods
41、and test procedures Damp heat (steady state) Part 1-51: Measurement methods and test procedures Dry heat Part 1-52: Measurement methods and test procedures Change of temperature Part 1-53: Measurement methods and test procedures Water immersion The committee has decided that the contents of this pub
42、lication will remain unchanged until 2003. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license fro
43、m IHS-,-,-IEC 60753-1-51 adopted as TIA-455-67-A ivINTRODUCTION Publications in the IEC 60793-1 series concern measurement methods and test procedures as they apply to optical fibres. Within the same series several different areas are grouped, as follows: parts 1-10 to 1-19: General parts 1-20 to 1-
44、29: Measurement methods and test procedures for dimensions parts 1-30 to 1-39: Measurement methods and test procedures for mechanical characteristics parts 1-40 to 1-49: Measurement methods and test procedures for transmission and optical characteristics parts 1-50 to 1-59: Measurement methods and t
45、est procedures for environmental characteristics. Copyright Electronic Industries Alliance Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IEC 60753-1-51 adopted as TIA-455-67-A 1OPTICAL FIBRES Part 1-51: Measurement methods an
46、d test procedures Dry heat 1 Scope and object This part of IEC 60793 provides a practical method for evaluating fibre performance in a defined environment. The purpose of this standard is to determine the suitability of optical fibre (types A1a to A1d and B1 to B4) to withstand the environmental con
47、dition of high temperature (dry heat) which may occur in actual use, storage and/or transport. The test is primarily intended to permit the observation of effects of high temperature over a given period. NOTE The applicability of this test to other fibre types is under study. 2 Normative references
48、The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60793. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of I
49、EC 60793 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60068-2-2, Environmental testing Part
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1