ANSI TIA-470.000-E-2014 Telecommunications Telephone Terminal Equipment Overview of Performance Standards for Analog Telephones.pdf

1、 TIA-470.000-E March 2014Telecommunications Telephone Terminal Equipment Overview of Performance Standards for Analog Telephones ANSI/TIA-470.000-E- 2014 APPROVED: MARCH 11, 2014 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunders

2、tandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respec

3、t preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and P

4、ublications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not

5、purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of

6、 trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-470.000-E, formulated under the cognizance of the TIA TR-41 User Premises Telecommunications Re

7、quirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals. . Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may b

8、e amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or i

9、nvestigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to inves

10、tigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discri

11、minatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engag

12、ed in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims an

13、y duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent ap

14、plications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the

15、 Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE

16、 CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES RE

17、GARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIR

18、ECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH

19、 OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI

20、/TIA-470.000-E i TABLE OF CONTENTS FOREWORD . ii 1 OVERVIEW FOR ANSI/TIA-470 STANDARDS . 1 2 DOCUMENT STRUCTURE FOR ANSI/TIA-470 2 2.1 SUB-DOCUMENT ANSI/TIA-470.000, OVERVIEW OF PERFORMANCE STANDARDS FOR ANALOG TELEPHONES . 2 2.2 SECTION ANSI/TIA-470.100, ACOUSTIC TRANSMISSION PERFORMANCE REQUIREMEN

21、TS FOR ANALOG TELEPHONES 2 2.3 SECTION ANSI/TIA-470.200, ELECTRICAL-INTERFACE PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES 2 2.4 SECTION ANSI/TIA-470.300, TELEPHONY FEATURES PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES . 2 ANSI/TIA-470.000-E ii FOREWORD (This foreword is not part of this standar

22、d.) This TIA Telecommunications document is produced by Subcommittee TR-41.3 of Committee TR-41. This document was developed in accordance with TIA procedural guidelines, and represents the consensus position of Subcommittee TR-41.3, which served as the formulating group. It is a revision of TIA-470

23、.000-D. The leadership of the TR-41.3 Analog and Digital Wireline Terminals Subcommittee (Chair: James Bress, AST Technology Labs Inc.: Vice-Chair: Allen Woo, Plantronics) acknowledges the written contributions provided by the following individuals in the development of this standard. Organization R

24、epresentative Previous Version(s) ANSI/TIA-470.000-E Whitesell Consulting LLC Steve Whitesell Editor Uniden Al Baum Editor AST Technology Labs, Inc. Don McKinnon Editor Advent Instruments David Stenner Alcatel Franois Pinier Microtronix Ken Macdonald Texas Instruments Tom Harley VTech Steve Kropp VT

25、ech Steve Whitesell Suggestions for improvement of this document are welcome. They should be sent to: Telecommunications Industry Association Engineering Department Suite 200 1320 North Courthouse Road Arlington, VA 22201 ANSI/TIA-470.000-E 1 1 OVERVIEW FOR ANSI/TIA-470 STANDARDS The ANSI/TIA-470 st

26、ructure is provided in the “Document Structure for ANSI/TIA-470” clause of this document. This structure provides improved document flexibility, allowing revisions of each particular Section to be handled in a more efficient process. This enables additional requirements to be developed and placed in

27、to the new document structure without having the entire document revised. ANSI/TIA-470.000-E 2 2 DOCUMENT STRUCTURE FOR ANSI/TIA-470 The ANSI/TIA-470 document is published as a series of sub-documents each containing information pertaining to a particular aspect of performance. The sub-document numb

28、er listed does not include the current revision suffix (e.g. “-A”, “-B”, etc.). The reader should check for the most recent version of each sub-document. 2.1 BASE DOCUMENT ANSI/TIA-470.000, OVERVIEW OF PERFORMANCE STANDARDS FOR ANALOG TELEPHONES This base document provides an overview of the analog

29、telephone performance standards and contains a detailed listing of document sections and their sub-documents 2.2 SECTION ANSI/TIA-470.100, ACOUSTIC TRANSMISSION PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES This Section contains the Acoustic Transmission Performance Requirements for Analog Telephon

30、es and includes the following sub-documents: ANSI/TIA-470.110 Transmission Requirements for Analog Telephones with Handsets ANSI/TIA-470.112 Transmission Requirements for Wideband Analog Telephones with Handsets ANSI/TIA-470.120 Transmission Requirements for Analog Speakerphones ANSI/TIA-470.122 Tra

31、nsmission Requirements for Wideband Analog Telephones with Speakerphones ANSI/TIA-470.130 Transmission Requirements for Analog Telephones with Headsets ANSI/TIA-470.132 Transmission Requirements for Wideband Analog Telephones with Headsets 2.3 SECTION ANSI/TIA-470.200, ELECTRICAL-INTERFACE PERFORMAN

32、CE REQUIREMENTS FOR ANALOG TELEPHONES This Section contains the Electrical-Interface Performance Requirements for Analog Telephones and includes the following sub-documents: ANSI/TIA-470.210 Resistance and Impedance Performance Requirements for Analog Telephones ANSI/TIA-470.220 Alerter Acoustic Out

33、put Performance Requirements for Analog Telephones ANSI/TIA-470.230 Network Signaling Performance Requirements for Analog Telephones. 2.4 SECTION ANSI/TIA-470.300, TELEPHONY FEATURES PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES This Section contains the Telephony Features Performance Requirements

34、for Analog Telephones and includes the following sub-documents: ANSI/TIA-470.310 Cordless Telephone Range Measurement Procedures ANSI/TIA-470.320 Cordless Telephone Operation and Feature Performance Requirements ANSI/TIA-470.330 Digital Telephone Answering Device Performance Requirements THE TELECOM

35、MUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing th

36、e business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).