ANSI TIA-470.120-D-2017 Telecommunications Telephone Terminal Equipment Transmission Requirements for Analog Speakerphones.pdf

1、 TIA-470.120-D (Revision of TIA-470.120-C) June 2017 Telecommunications Telephone Terminal Equipment Transmission Requirements for Analog Speakerphones ANSI/TIA-470.120-D-2017 APPROVED: JUNE 19, 2017 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through

2、eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications sh

3、all not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internation

4、ally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Th

5、is Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations befor

6、e its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-470.120-D-R1, formulated under the cognizance of the formulated under the cognizance

7、of the TIA TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer t

8、o current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT T

9、his document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to th

10、e TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA

11、or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued pate

12、nts, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA

13、takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge w

14、hether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Refe

15、rences to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as de

16、fined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TI

17、A Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Paten

18、t(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRE

19、SS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DIS

20、CLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR

21、PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMA

22、GES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT

23、OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-470.120-D i TABLE OF CONTENTS FOREWORD IV INTRODUCTION V 1 SCOPE 1 1.1 Limits of this Standard for Product Evaluation 1 1.2 Environmental 1 1.3 Safety 1 2 NORMATIVE REFERENCES 2 3 A

24、BBREVIATIONS, ACRONYMS, AND DEFINITIONS 3 3.1 Definitions 3 3.2 Abbreviations and Acronyms .5 4 TESTING CONSIDERATIONS 6 4.1 General .6 4.1.1 Test Environment Background Noise .6 4.1.2 Acoustic Test Interface Equipment .6 4.1.3 Test Signals .6 4.1.4 Subjective Tests .6 4.1.5 Test Measurement Resolut

25、ion .7 4.1.6 Test Methods .7 4.2 Test Positions and Arrangements .7 4.2.1 Receive General Test Setup Arrangements .7 4.2.2 Send General Test Setup Arrangements 8 4.2.3 Send Level Directionality Test Arrangement 9 4.3 Test Circuits .10 4.3.1 Receive testing circuit .10 4.3.2 Send Testing Circuit 10 4

26、.3.3 DC Feed Circuit .11 4.3.4 Termination Impedance .11 4.3.5 Source Impedance 11 4.3.6 Artificial Lines .12 5 TECHNICAL REQUIREMENTS . 13 5.1 Categories of Criteria .13 5.2 Receive Performance 13 5.2.1 Receive Output Level 14 5.2.2 Receive Frequency Response 15 5.2.3 Receive Distortion and Noise 1

27、7 5.2.4 Receive Noise 18 5.2.5 Receive Off-Hook Single Frequency Interference (SFI) .18 5.3 Send Performance .19 ANSI/TIA-PN-470.120-D ii 5.3.1 Send Output Level .19 5.3.2 Send Level Directionality (SLD) .20 5.3.3 Send Frequency Response .20 5.3.4 Send Muting 22 5.3.5 Send Distortion and Noise .22 5

28、.3.6 Send Off-Hook Noise 23 5.3.7 Send On-Hook Noise .23 5.3.8 Send Off-Hook Single Frequency Interference (SFI) 23 5.4 Switching operation between speakerphone the send loudness rating method has been removed. Other significant changes include: 1. Changed test signals to be IEEE Std 269 real speech

29、. 2. Changed from using the “Reference Volume Control” setting to the “Nominal Volume Control”. 3. Changed frequency response limits from staircase 1/3rd octave limits to linear limits. 4. Subjective and Objective Speech Quality testing informative annex was added. 5. Added test position for cordles

30、s handset speakerphones. Finally, the structure of the document has been modified to place the requirements for receive performance before those for send performance since the establishment of the Nominal Volume Control Setting is a necessary prerequisite for many of the tests. ANSI/TIA-470.120-D 1

31、TELEPHONE TERMINAL EQUIPMENT TRANSMISSION REQUIREMENTS FOR ANALOG SPEAKERPHONES 1 SCOPE This standard provides acoustic transmission performance requirements for speakerphone equipped analog telephones intended for connection to the Public Switched Telephone Network (PSTN), analog terminal adaptors

32、(ATA) and voice gateways. These requirements should ensure compatibility and satisfactory performance to the user in a high percentage of installations. Test measurement methods reference procedures in IEEE Std 1329 where applicable. This standard is limited to single housing speakerphones intended

33、for use on a desk, table, or handheld (i.e. cordless handsets) by a single user at a distance of one half meter or closer. These requirements are not intended for multi-user conference speakerphones. While the procedures may call out specific test points within the requirements, the full range of th

34、e requirements take precedence. 1.1 LIMITS OF THIS STANDARD FOR PRODUCT EVALUATION It is recognized that there are many parameters that may influence the performance of speakerphone devices including: 1. The distance between the user and the speakerphone device 2. Users with a variety of talker leve

35、ls 3. The level and type of environmental noise 4. Non-linear processing included in the speakerphone device design (e.g., AGC, AEC) This standard establishes the performance requirements for speakerphones with the following limitations: 1. A single test position is used to simulate the distance bet

36、ween the user and speakerphone. 2. The speakerphone is tested without environmental noise present. 3. Testing is performed without consideration for any effects of non-linear processing, although such non-linear processing may be present. Subjective testing may provide additional information regardi

37、ng a speakerphone devices performance. However, the subjective test shall not be a substitution for the objective test nor a condition to pass the standard. 1.2 ENVIRONMENTAL This standard does not contain environmental requirements. Environmental requirements can be found in ANSI/TIA-571-C. 1.3 SAF

38、ETY This standard does not contain safety requirements. ANSI/TIA-PN-470.120-D 2 2 NORMATIVE REFERENCES The following standards contain provisions, which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standar

39、ds are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards. 1. ANSI/ASA S1.4 Part 1 (2014), Ele

40、ctroacoustics Sound Level Meters Part 1: Specifications. 2. ANSI/ASA S1.11 Part 1 (2014), Electroacoustics Octave-Band and Fractional-Octave-Band Filters Part 1: Specifications. 3. IEEE Std 269-2010, IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, H

41、andsets, and Headsets. 4. IEEE Std 1329-2010, Standard Method for Measuring Transmission Performance of Speakerphones. 5. IEEE Std 743-1995, IEEE Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for Telecommunications. 6. ITU-T Recommendation O.41 (1994-1

42、0), Psophometer for Use on Telephone-Type Circuits 7. ITU-T Recommendation P.51 (1996-08), Artificial Mouth 8. ITU-T Recommendation P.56 (2011-12), Objective Measurement of Active Speech Level ANSI/TIA-470.120-D 3 3 ABBREVIATIONS, ACRONYMS, AND DEFINITIONS 3.1 DEFINITIONS For the purposes of this st

43、andard, the following definitions apply. Active Speech Level (ASL): Long term average speech level which does not include pauses or silences. It is the time integral of the instantaneous power over the active time, divided by active time, in decibels relative to the appropriate reference. (See ITU-T

44、 P.56) Artificial Mouth and Mouth Simulator: This standard uses the term “mouth simulator” synonymously with the term “artificial mouth” (ITU-T P.51), to harmonize with IEEE Std 269. Cordless: A cordless terminal does not have a cable between its handset, headset or speakerphone transducers and a ba

45、se unit that connects to the network. Electrical Test Point: The point in a battery feed circuit (see Figure 8) at which signals are applied/accessed: Receive Electrical Test Point (RETP): The point in a battery feed circuit across the 900 ohm source at which signals are applied to the phone in the

46、receive direction Send Electrical Test Point (SETP): The point in a battery feed circuit across the 900 ohm load at which signals coming from the phone in the send direction are accessed. Electrical Units: The following electrical units are used in this standard: dBm: Power level in decibels, relati

47、ve to a power of 1 mW (milliwatt). dBmp: Power level in decibels, relative to a power of 1 mW, using psophometric weighting (See Annex B). dBV: Voltage level in decibels, relative to 1 volt rms. Far-end: The term far-end is used to describe the part of the end-to-end connection opposite where the de

48、vice under test (DUT) is located. Free Field (FF): Sound field in a homogenous, isotropic medium free from boundaries. In practice, the effects of boundaries on a free field are negligible over the region of interest. Listener Reference Point (LRP): A generic term representing the location at which

49、the acoustic output from the receiver is to be determined or specified. For the purposes of this standard, the LRP of a speakerphone is the FF. Mouth Reference Point (MRP): A point on the axis of the mouth simulator, 25 mm in front of the center of the equivalent lip plane. Nom VC 0 km (Nominal Volume Control Setting 0 km): The quietest volume control setting that produces a receive level of at least 65 dBSPL with a speech test level of -18 dBV with a 0 km artificial line. Nom VC 2.7 km (Nominal Volume Control Setting 2.7 km): The quietest volume control setting that produc