ANSI TIA-470.220-E-2016 Telecommunications Telephone Terminal Equipment Alerter Acoustic Output Performance Requirements for Analog Telephones.pdf

1、 TIA-470.220-E (Revision of TIA-470.220-D) June 2016Telecommunications Telephone Terminal Equipment Alerter Acoustic Output Performance Requirements for Analog Telephones ANSI/TIA-470.220-E-2016 APPROVED: JUNE 17, 2016 NOTICE TIA Engineering Standards and Publications are designed to serve the publi

2、c interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards

3、and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestic

4、ally or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard

5、 or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulator

6、y limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-470.220-E-D1, formulated under the cognizance of the TI

7、A TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current

8、Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This docume

9、nt is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA webs

10、ite (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any oth

11、er body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or co

12、pyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no p

13、osition with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether pro

14、posed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to

15、a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in t

16、he TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedur

17、es for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or pu

18、blished pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPL

19、IED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY

20、 AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED O

21、R RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LO

22、SS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE

23、 OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-470.220-E i Table of Contents 1 SCOPE . 1 2 NORMATIVE REFERENCES . 2 3 ABBREVIATIONS, ACRONYMS, AND DEFINITIONS . 3 3.1 ABBREVIATIONS AND ACRONYMS . 3 3.2 DEFINITIONS . 3 4 TESTING CONSIDERAT

24、IONS . 4 4.1 TEST EQUIPMENT PERFORMANCE 4 4.2 TEST METHODS 4 4.3 SAFETY . 4 5 TECHNICAL REQUIREMENTS 5 5.1 CATEGORIES OF CRITERIA 5 5.2 ALERTER SENSITIVITY . 5 5.2.1 Response to Ringing Signals 5 5.2.2 Reproduction of Distinctive Ringing Patterns 7 5.2.3 Non-Response to Other Signals 9 5.3 ALERTER A

25、COUSTIC OUTPUT . 13 5.3.1 Alerter Sound Pressure . 13 5.3.2 Effect of Voltage Variations of the Applied Ringing Signal 16 ANNEX A (NORMATIVE) A-WEIGHTING CURVE . 17 ANNEX B (INFORMATIVE) EXAMPLES OF STEP-LIKE VOLTAGE CHANGES . 18 ANNEX C (INFORMATIVE) BIBLIOGRAPHY 20 Table of Figures Figure 1 Ringin

26、g Signal Test Circuit . 5 Figure 2 Alerter Response and Non-Response Graph . 10 Figure 3 On-Hook dc Voltage Non-Response Test Circuit . 10 Figure 4 AC Signals Non-Response Signal Test Circuit . 11 Figure 5 Long Loop False Ringing Detection Circuit . 11 Figure 6 One Possible Telephone Simulator with

27、Pulse Dial Control Circuit . 12 Figure 7 Alerter Measurement Setup . 15 Figure 8 Alerter Measurement Setup for Alerters in Handsets 16 Figure A.1 A-weighting Curve 17 Figure B.1 Capture of Step-Like Voltages . 18 Table of Tables Table 1 Alerter Ringing Signals. 6 Table 2 Simulated Ringing Test Signa

28、l Matrix 6 Table 3 On/Off Intervals for Distinctive Ringing Patterns 8 Table 4 Ringer De-rating function . 14 Table A.1 A-Weighting Curve . 17 Table B.1 Step-Like Voltages Levels and Timings . 19 ANSI/TIA-470.220-E 2 FOREWORD (This foreword is not part of this Standard.) This document is a TIA Telec

29、ommunications standard produced by Subcommittee TR-41.3 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus of the subcommittee, which served as the formulating group. There are three annexes in this Standard. Annex A is normativ

30、e and is considered part of this Standard; Annexes B and C are informative and are not considered part of this Standard. The leadership of the TR-41.3 Subcommittee (Chair: Don McKinnon, AST Technology Labs, Inc., Vice-Chair: Allen Woo, Plantronics Inc.) acknowledges the written contributions provide

31、d by the following individuals in the development of this standard. Organization Representative Previous Version TIA-470.220-E AST Technology Labs, Inc. Don McKinnon Editor Editor AST Technology Labs, Inc. James Bress Editor Siemens Ron Magnuson Editor Advent Instruments Dave Stenner Atlinks Fred Bo

32、nhomme ISED Canada Jason Nixon - ISED Canada Magdoly Rondon - Microsemi Inc. Dean Morgan MWM Acoustics Glenn R. Hess RadioShack Rick Carey Sprint Amar Ray Uniden Al Baum Whitesell Consulting LLC Steve Whitesell Wyle Labs Jimmy Smith Suggestions for improvement of this standard are welcome. They shou

33、ld be sent to: Telecommunications Industry Association Technology and Standards Department Suite 200 1320 North Courthouse Road Arlington, VA 22201 (http:/www.tiaonline.org) ANSI/TIA-470.220-E 3 Introduction The requirements and recommendations in this standard were originally included in the TIA-47

34、0-B standard (and previous versions of the TIA-470 standard). When TIA-470-B was revised, the requirements were divided into subdocuments and ANSI/TIA-470.220-C was published with the requirements for the alerter performance for analog interface telephones. ANSI/TIA-470.220-C changed the method used

35、 to evaluate the acoustic alerter frequency content and calculate the acoustic output level. In previous versions of this standard, the frequency content was described in terms of two fundamental frequencies “f1” and “f2”, which were required to meet a number of specifications including minimum outp

36、ut levels. The “f1” and “f2” concept was retained, but the specifications were relaxed to no longer require them to meet minimum output levels or to even be the largest output level components. This allowed other types of alerting sounds such as melodies to meet the standard. In addition, the output

37、 level specification and method of measurement was changed from the total A-weighted sound power above a reflecting plane to the average A-weighted sound pressure measured at six equal angles around the DUT. ANSI/TIA-470.220-D removed the specification of fundamental frequencies and replaced it with

38、 a requirement that de-rates the contribution of frequency components above 2000 Hz at the rate of 12 dB/octave when calculating the acoustic output level. This current revision removes Type-B ringing but retains Type-A. In 2015 TR-41 received liaison confirmation from ATIS that support for Type-B r

39、inging is no longer required. ANSI/TIA-470.220-E 4 Telephone Terminal Equipment Alerter Acoustic Output Performance Requirements for Analog Telephones 1 SCOPE This standard defines the acoustic and electrical performance requirements of analog telephone alerters (sometimes referred to as ringers). A

40、NSI/TIA-470.220-E 5 2 NORMATIVE REFERENCES The following standards contain provisions, which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based

41、on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards published by them. 1. ANSI S1.4-1983 (R2006), Specification for Sound Level Meters 2. ANSI/TIA-9

42、68-B-2009, Telecommunications - Telephone Terminal Equipment - Technical Requirements for Connection of Terminal Equipment to the Telephone Network 3. ANSI/TIA-968-B-3-2016, Telecommunications Telephone Terminal Equipment Technical Requirements for Connection of Terminal Equipment to the Telephone N

43、etwork - Addendum 3 ANSI/TIA-470.220-E 6 3 ABBREVIATIONS, ACRONYMS, AND DEFINITIONS 3.1 ABBREVIATIONS AND ACRONYMS For the purposes of this Standard, the following abbreviations and acronyms apply. DUT Device Under Test LSI Long Silent Interval VMWI Visual Message Waiting Indicator 3.2 DEFINITIONS F

44、or the purposes of this Standard, the following definitions apply. A-weighted sound pressure: An acoustic measurement made using the A frequency weighting curve specified in ANSI S1.4, expressed in dBA, referenced to 20 micro-pascals. De-rated A-Weighted Sound Pressure Level: A-weighted average soun

45、d pressure level after applying a 12 dB per octave low-pass filter for all frequency components above 2000 Hz. Long Silent Interval: The extended interval of no ringing signal after the last On Period of a ringing cycle. Off-Hook: The state of the DUT when the hook-switch is closed. On-Hook: The sta

46、te of the DUT when the hook-switch is open. On Period: The interval during a ringing cycle in which the ringing signal is applied to Tip and Ring. Off Period: The interval during a ringing cycle in which the ringing signal is removed from Tip and Ring. Ringing Cycle: The interval from the start of t

47、he first On Period to the end of the Long Silent Interval. Type-A Ringing: Ringing at 20 Hz or 30 Hz as defined in ANSI/TIA-968-B ANSI/TIA-470.220-E 7 4 TESTING CONSIDERATIONS Alerters provide an acoustic output in response to ringing signals supplied to the device in the On-Hook State. The followin

48、g requirements are intended to cover the response of alerters for Type-A ringing signals as identified in TIA-968-B. 4.1 TEST EQUIPMENT PERFORMANCE The ring generator in the various test circuits shall be capable of generating the applicable test signals. The source impedance shall be lower than 900

49、 ohms and should be lower than 600 ohms. The test circuit shall use a true RMS Voltmeter. 4.2 TEST METHODS Several performance measurement procedures are established, each of which yields standardized measurement data that may be used for the determination of compliance with this standard. Although this document may reference specific procedures or test equipment, the intent is not to be all-inclusive. Any measurement procedure and equipment that can result in an identical measurement is co