ANSI TIA-606-C-2017 Administration Standard for Telecommunications Infrastructure.pdf

1、 TIA-606-C (Revision of ANSI/TIA-606-B) July 2017 Administration Standard for Telecommunications Infrastructure ANSI/TIA-606-C-2017 APPROVED: JUNE 19, 2017 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufa

2、cturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member o

3、r non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted

4、 by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all

5、safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this doc

6、ument are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-606-C-D1, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.6 Subcommittee on Telecommun

7、ications Infrastructure and Equipment Administration (606). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STA

8、NDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these docume

9、nts either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request perm

10、ission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document

11、 may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no searc

12、h or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to

13、 investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-

14、discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”)

15、 engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i

16、) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essen

17、tial Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce

18、or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND

19、 ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS

20、 AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE L

21、IABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE),

22、 WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE P

23、UBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-PN-606-C iADMINISTRATION STANDARD FOR TELECOMMUNICATIONS INFRASTRUCTURE Table of Contents FOREWORD VI INTRODUCTION IX GENERAL . IX PURPOSE . IX SPECIFICATION OF CRITERIA IX METRIC EQUIVALENTS OF US CUSTOMARY UNITS X LIFE OF THIS STANDARD X USE OF LE

24、GACY IDENTIFIER FORMATS . X ELEMENTS OF A GENERIC TELECOMMUNICATIONS INFRASTRUCTURE X 1 SCOPE 1 2 NORMATIVE REFERENCES . 1 3 DEFINITION OF TERMS, ACRONYMS AND ABBREVIATIONS, AND UNITS OF MEASURE 2 3.1 GENERAL 2 3.2 DEFINITION OF TERMS 2 3.3 ACRONYMS AND ABBREVIATIONS 8 3.4 UNITS OF MEASURE . 8 4 CLA

25、SSES OF ADMINISTRATION . 9 4.1 GENERAL 9 4.2 DETERMINATION OF CLASS . 9 4.2.1 Class 1 9 4.2.2 Class 2 9 4.2.3 Class 3 10 4.2.4 Class 4 10 4.3 CLASSES AND ASSOCIATED IDENTIFIERS . 10 4.4 LABELING FORMATS . 10 4.5 ANSI/TIA-606-A AND ISO/IEC TR 14763-2-1 COMPATIBLE FORMATS 11 4.6 ALTERNATIVE LABEL FORM

26、ATS . 18 5 CLASS 1 ADMINISTRATION . 19 5.1 INFRASTRUCTURE IDENTIFIERS . 19 5.1.1 Telecommunications space identifier 19 5.1.2 Cabinet and rack identifiers . 20 5.1.3 Patch panel and termination block identifier . 26 5.1.4 Patch panel port and termination block position identifiers . 35 5.1.5 Cables

27、between patch panels or termination blocks. 36 5.1.6 Administration of pairs, strands, and groupings within a cable . 39 5.1.7 Cabling Subsystem 1 link identifier . 40 5.1.8 Equipment outlet and telecommunications outlet identifiers . 42 5.1.9 Identifiers for consolidation points on Cabling Subsyste

28、m 1 links 43 5.1.10 Identifiers for zone distribution area ports . 43 5.1.11 Identifiers for splices on Cabling Subsystem 1 links . 44 5.1.12 PBB identifier . 45 5.1.13 SBB identifier . 45 5.1.14 RBB identifier 46 5.1.15 Mesh-BN identifier . 47 5.1.16 TBC identifier . 47 ANSI/TIA-PN-606-C ii5.1.17 T

29、BB identifier . 48 5.1.18 BBC identifier 48 5.1.19 Identifier for bonding conductor attached to PBB . 49 5.1.20 Identifier for bonding conductor attached to SBB . 49 5.1.21 Identifier for bonding conductor attached to mesh-BN 50 5.1.22 Identifier for bonding conductor attached to RBB . 50 5.2 REQUIR

30、ED RECORDS . 51 6 CLASS 2 ADMINISTRATION . 51 6.1 INFRASTRUCTURE IDENTIFIERS . 51 6.1.1 Building Cabling Subsystem 2 and 3 cable identifiers 52 6.1.2 Pairs, strands, and grouping identifiers for Building Cabling Subsystem 2 and 3 53 6.1.3 Building Cabling Subsystem 2 and 3 splice identifier . 54 6.1

31、.4 Firestopping location identifier 54 6.2 REQUIRED RECORDS . 55 6.2.1 TS records . 55 6.2.2 Building Cabling Subsystem 2 and 3 cable records 56 6.2.3 PBB records 56 6.2.4 SBB records 56 6.2.5 Firestopping records . 57 7 CLASS 3 ADMINISTRATION . 57 7.1 INFRASTRUCTURE IDENTIFIERS . 57 7.1.1 Campus or

32、 site identifier . 57 7.1.2 Building identifier . 58 7.1.3 Inter-building cable identifier . 58 7.1.4 Inter-building cable pair / port identifier . 59 7.1.5 Inter-building cable splice identifier . 60 7.2 REQUIRED RECORDS . 60 7.2.1 Building records. 60 7.2.2 Campus cable records 60 8 CLASS 4 ADMINI

33、STRATION . 61 8.1 INFRASTRUCTURE IDENTIFIERS . 61 8.2 REQUIRED RECORDS . 61 9 OPTIONAL IDENTIFIERS FOR INFRASTRUCTURE ELEMENTS 62 9.1 GENERAL 62 9.2 ABSOLUTE AND PARTIAL IDENTIFIERS 62 9.3 OUTDOOR TELECOMMUNICATIONS SPACE IDENTIFIERS . 62 9.3.1 TIA-606-A compatible format 62 9.3.2 ISO/IEC compatible

34、 format . 62 9.3.3 Implementation and labeling . 62 9.4 PATHWAY IDENTIFIERS . 63 9.4.1 Intra-space pathway identifiers . 63 9.4.2 Building pathway identifiers . 64 9.4.3 Building entrance pathway identifiers . 64 9.4.4 Outside plant pathway identifiers 65 9.4.5 Campus entrance pathway identifiers .

35、65 9.5 EXAMPLES OF ELEMENTS AND IDENTIFIERS . 66 10 COLOR-CODING IDENTIFICATION 69 10.1 GENERAL 69 10.2 COLOR-CODING OF TERMINATION FIELDS 69 10.2.1 General 69 10.2.2 Color-coding of specific termination fields 69 ANSI/TIA-PN-606-C iii10.3 COLOR-CODING IN CABLING SUBSYSTEM 1 CABLING 71 10.3.1 Cablin

36、g Subsystem 1 cabling components . 71 10.3.2 Fiber cabling components . 71 11 PERMANENT LABELS 71 11.1 VISIBILITY AND DURABILITY . 71 11.2 MACHINE GENERATION . 71 12 ADMINISTRATION SYSTEMS USING RECORDS, LINKAGES mandatory and advisory. The mandatory requirements are designated by the word “shall”;

37、advisory requirements are designated by the words “should,” “may,” or “desirable,” which are used interchangeably in this Standard. Mandatory criteria generally apply to protection, performance, administration and compatibility; they specify the absolute minimum acceptable requirements. Advisory or

38、desirable criteria are presented when their attainment will enhance the general performance of the cabling system in all its contemplated applications. ANSI/TIA-PN-606-C xA note in the text, table, or figure is used for emphasis or for offering informative suggestions. Metric equivalents of US custo

39、mary units The dimensions in this Standard are metric or US customary with approximate conversion to the other. Life of this Standard This Standard is a living document. The criteria contained in this Standard are subject to revisions and updating as warranted by advances in building construction te

40、chniques and telecommunications technology. Use of legacy identifier formats This Standard specifies two identifier formats, one fully backward compatible with legacy TIA-606-A identifiers and one based on TIA-606-A, but modified to be compatible with the ISO/IEC TR 14763-2-1 identifiers. Additional

41、ly, this standard specifies identifier formats for telecommunications bonding and grounding system elements using terms compatible with ANSI/TIA-607-C. However, identifier formats using terms compatible with earlier revisions of TIA-607 may also be used. Elements of a generic telecommunications infr

42、astructure Figure 2 illustrates a representative model for generic telecommunications infrastructures for which this Standard specifies an administration system. The elements illustrated include: a) Cabling Subsystem 1 pathways and cabling; b) Cabling Subsystem 2 and 3 pathways and cabling; c) telec

43、ommunications bonding and grounding; d) spaces (e.g., entrance facility, telecommunications room, equipment room); and e) firestopping. ANSI/TIA-PN-606-C xiSBBPBB= Cross-connect= Secondary Bonding Busbar= Equipment outlet= Not in scope of standard Fire stop locationDistributor Room withDistributor C

44、Grounding electrode systemGrounding Electrode ConductorCables to service providersTelecom bonding backbone (TBB)Telecom pathways and Cabling subsystem 3 Distributor roomwithDistributor CBuilding 1Building 2TelecommunicationsEntrance FacilityService equip Telecom bonding conductor (TBC)SBBSBBSBBTelec

45、ommunicationsEntrance RoomDistributor RoomwithDistributor BTelecom pathways and Cabling subsystem 2Telecom pathways and Cabling subsystem 3Distributor Room withDistributor CDistributor Room withDistributor BTelecom pathways parties to agreements based on this Standard are encouraged to investigate t

46、he possibility of applying the most recent editions of standards indicated. ANSI and TIA maintain registers of currently valid national standards published by them. a) ANSI/TIA-568.0-D-2015, Generic Telecommunications Cabling for Customer Premises b) ANSI/TIA-568.3-D-2016, Optical Fiber Cabling and

47、Components Standard c) ANSI/TIA-5048-2017, Automated Infrastructure Management (AIM) Systems Requirements, Data Exchange and Applications d) EIA/ECA-310-E-2005, Cabinets, Racks, Panels, and Associated Equipment e) IEC 60297-3-100 2008, Mechanical Structures for Electronic Equipment Dimensions of Mec

48、hanical Structures of the 482,6 mm (19 in) Series Part 3-100: Basic Dimensions of Front Panels, Subracks, Chassis, Racks and Cabinets f) ISO/IEC TR 14763-2-1 2011, Information Technology - Implementation and Operation of Customer Premises Cabling - Part 2-1: Planning and Installation - Identifiers w

49、ithin Administration Systems ANSI/TIA-PN-606-C 23 DEFINITION OF TERMS, ACRONYMS AND ABBREVIATIONS, AND UNITS OF MEASURE 3.1 General For the purposes of this Standard, the following definitions, acronyms, abbreviations and units of measure apply. 3.2 Definition of terms access provider: The operator of any facility that is used to convey telecommunications signals to and from a customer premises. adapter; optical fiber duplex: A mechanical device designed to align and join two optical fiber connectors (plugs) to form an optical connection. administration: The method for labeling,