ANSI TIA-664.514-B-2007 Wireless Features Description Mobile Access Hunting (MAH).pdf

1、 TIA-664.514-B (Revision of TIA-664.514-A) October 2007Wireless Features Description: Mobile Access Hunting (MAH) ANSI/TIA-664.514-B-2007 APPROVED: OCTOBER 12, 2007 REAFFIRMED: APRIL 4, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminati

2、ng misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not i

3、n any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Sta

4、ndards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standa

5、rd does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use

6、. (From Project No. SP-3-4652.514-RV2-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the stan

7、dards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting

8、of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or valid

9、ity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represen

10、t that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publ

11、ication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investig

12、ate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Informat

13、ion as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect,

14、test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS

15、FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY A

16、PPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE O

17、F THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE),

18、 PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14

19、 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 514-i Contents Wireless Features Description: Mobile Access Hunting Contents List of Tables.ii Revision Historyii 1 Mobile Access Hunting (MAH)1 1.1 Normal Proce

20、dures with Successful Outcome2 1.2 Exception Procedures or Unsuccessful Outcome .6 1.3 Alternative Procedures .7 1.4 Interactions with Other Wireless Services7 TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

21、46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 List of Tables 514-ii List of Tables Table 1: MAH Group Subscription Options2 Table 2: MAH Member Subscription Options.2 Revision History Revision Date Remarks IS-53, Revision 0 August 1991 Initial publication IS-53, Revision A May 1995 Updated publicatio

22、n ANSI/TIA/EIA-664, Revision 0 June 1996 Initial ANSI publication ANSI/TIA/EIA/664-514-A July 2000 Updated ANSI publication TIA-664.514-B September 2007 Updated publication TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

23、 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 514-1 Mobile Access Hunting (MAH) 1 Mobile Access Hunting (MAH) Mobile Access Hunting (MAH) causes a call to a Pilot Directory Number to search a list of termination addresses sequentially for one that is idle and able to be alerted. If a par

24、ticular termination address is busy, inactive, fails to respond to a paging request, or does not answer alerting before a time-out, then the next termination address in the list is tried. Only one termination address is alerted at a time. The mobile telephones in the group may be alerted using disti

25、nctive alerting. Additional calls may be delivered to the MAH Pilot Directory Number at any time. The members of an MAH group are described by a list of termination addresses. Each termination address may either be a Directory Number or a MIN that uniquely identifies a mobile station. This allows MS

26、s served by the same Home Location Register (HLR) as the MAH pilot DN, MSs served by other HLRs (especially for serving multi-NAM phones of multiple service providers) and landline telephone numbers to be included1. MAH may be used for either a single user or multiple users. The difference between t

27、he two is in determining when the MAH group is busy. In the single user case, the group is considered to be busy when one of the members is considered to be busy. In the multiple user case, the group is considered to be busy when all of the accessible members are considered to be busy. A member is c

28、onsidered to be busy when it cannot accept the presentation of another call. The busy condition of landline telephones cannot always be accurately determined. The MAH Pilot Directory Number may have features to manage incoming calls. These features should take precedence over the corresponding featu

29、res of individual members; however, these interactions, when occurring at the Home Location Register (HLR), are beyond the scope of this Standard. If an MAH Pilot Directory Number is an MAH member Directory Number, the MAH member loses his or her individual incoming call features. The MAH members in

30、coming call features are superseded by the incoming call features of the MAH Pilot Directory Number. If an MAH Pilot Directory Number is not an MAH member Directory Number, the features of the MAH Pilot Directory Number may be changed only through Remote Feature Control or service provider provision

31、ing. MAH does not affect the ability of an MAH member to originate calls. MAH may affect the ability of an MAH member to receive calls. If an MAH member has only a single Directory Number that is the same as the MAH Pilot Directory Number, the MAH member may not receive calls except through the MAH

32、Pilot Directory Number. If an MAH member has a Directory Number different than the MAH Pilot Directory Number, the MAH member may receive calls as an individual as well as calls through the 1Interactions between MAH and the features of MAH members controlled by different systems are beyond the scope

33、 of this Standard TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Mobile Access Hunting (MAH) 514-2 MAH Pilot Directory Number. Such an MAH member may use revertiv

34、e calling (i.e., a call to itself) for other features, such as Voice Mail Retrieval. Applicability to Telecommunications Services MAH is applicable to voice telecommunication services. 1.1 Normal Procedures with Successful Outcome Authorization MAH Group Authorization MAH may be generally available

35、or may be provided after prearrangement with the service provider. The MAH group authorization may have the following subscription options: Table 1: MAH Group Subscription Options Subscription Options Values Type Single User. The MAH group is considered to be busy when a member of the MAH group is c

36、onsidered to be busy. Multiple Users. The MAH group is considered to be busy when all accessible members of the MAH group are considered to be busy. MAH Member Authorization Each MAH member authorization may have the following subscription options: Table 2: MAH Member Subscription Options Subscripti

37、on Options Values Ordering Demand. An MAH member is authorized to control his or her position in the MAH group(s) (i.e., to the first position or the last position). Permanent. An MAH member is in a fixed position in his or her MAH group(s). Membership Demand. An MAH member is authorized to activate

38、 and deactivate his or her membership in an MAH group(s). Permanent. An MAH member is always a member of his or her registered MAH group(s). TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 5

39、2 53 54 55 56 57 58 59 60 514-3 Mobile Access Hunting (MAH) Deauthorization MAH may be withdrawn at the subscribers request or for administrative reasons. Registration MAH Pilot Registration MAH is registered by the service provider defining the MAH Pilot Directory Number, the MAH members, and possi

40、bly the ordering of the MAH members. The MAH Pilot Directory Number may be the same as the Mobile Directory Number of a member MS. However, in this case it may not be possible to reach the MS individually or to have features distinguishable between the MDN and the MAH Pilot Directory Number. The tel

41、ephones in an MAH group are described by a list of termination addresses. Each termination address may either be a Directory Number or a MIN that uniquely identifies a mobile station. This allows MSs served by the same Home Location Register (HLR) as the FA pilot DN, MSs served by other HLRs (especi

42、ally for serving multi-NAM phones of multiple service providers) and landline telephone numbers to be included. The distinctive alerting pitch, cadence or both may also be specified for the MAH alerting. MAH Member Registration Each MAH member may register the pilot number(s) of the default group(s)

43、 to which it belongs. This pilot number is used to access the group for the default MAH group membership activate and deactivate and the default member ordering feature codes. Demand Member Ordering for a Subscribers Default MAH Group(s) An MAH Demand Ordering authorized member may change his or her

44、 ordering in the members default MAH group(s) by specifying the MAH ordering feature code, as in: *FC + 1 + SEND , or (first in default lists) *FC + 9 + SEND . (last in default lists) If the ordering is accepted, the system shall indicate success with feature confirmation treatment. Demand Member Or

45、dering for a Specified MAH Group An MAH Demand Ordering authorized member may change his or her ordering in the single MAH group by specifying the MAH ordering feature code, or for a single MAH group by specifying the MAH member ordering feature code and a specific MAH Pilot Directory Number, as in:

46、 *FC + 1 + MAH Pilot Directory Number + SEND , or (first in specific list) *FC + 9 + MAH Pilot Directory Number + SEND . (last in specific list) TIA-664.514-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

47、51 52 53 54 55 56 57 58 59 60 Mobile Access Hunting (MAH) 514-4 If the member ordering is accepted, the system shall indicate success with feature confirmation treatment. The MAH member ordering feature code must be distinct from the membership activation and deactivation feature codes. Deregistrati

48、on MAH shall be deregistered upon deauthorization. Individual members of the MAH group may be deleted at any time by the service provider. Activation MAH shall be activated upon registration. Demand Member Activation for a Subscribers Default MAH Group(s) An MAH Demand Membership authorized member m

49、ay activate his or her membership in the members default MAH group(s) by specifying the MAH membership activation feature code, as in: *FC + SEND . If the activation is accepted, the system shall indicate success with feature confirmation treatment. Demand Member Activation for a Specified MAH Group An MAH Demand Membership authorized member may activate his or her membership in a single MAH group by specifying the MAH membership activation feature code and a specific MAH Pilot Directory Number, as in: *FC + MAH Pilot Directory Number + SEND . If the activation is accepted, the sy