ANSI TIA-664.802-B-2007 Wireless Features Description Subscriber Confidentiality.pdf

1、 TIA-664.802-B (Revision of TIA-664.802-A) October 2007Wireless Features Description: Subscriber Confidentiality ANSI/TIA-664.802-B-2007 APPROVED: OCTOBER 23, 2007 REAFFIRMED: FEBRUARY 1, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through elimina

2、ting misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not

3、 in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. S

4、tandards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Stan

5、dard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its u

6、se. (From Project No. SP-3-4652.802-RV2-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the st

7、andards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consistin

8、g of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or val

9、idity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or repres

10、ent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or pu

11、blication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or invest

12、igate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Inform

13、ation as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect

14、, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENES

15、S FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY

16、 APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE

17、 OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE

18、), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.802-B 1 2 3 4 5 6 7 8 9 10 11 12 13

19、14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 802-i Contents Wireless Features Description: Subscriber Confidentiality Contents Revision Historyii 1 Network Service Descriptions 1 1.1 Subscriber Confidenti

20、ality (SC) .1 TIA-664.802-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Revision History 802-ii Revision History Revision Date Remarks IS-735, Revision 0 January 1998 Initia

21、l publication ANSI/TIA/EIA/664-802 July 2000 Initial ANSI publication TIA-664.802-A December 2000 Updated ANSI publication TIA-664.802-B September 2007 Updated publication TIA-664.802-B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

22、42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Network Service Descriptions 802-1 Subscriber Confidentiality (SC) 1 Network Service Descriptions This section describes services used by the wireless system and network operators. Subscribers may or may not be directly aware of the use of ser

23、vices that are independent of subscriber involvement. 1.1 Subscriber Confidentiality (SC) Subscriber Confidentiality (SC) allows the wireless system to assign an MS a Temporary Mobile Station Identity (TMSI) to be used in subsequent communications with the MS. The TMSI should not have an externally

24、visible association with the MSs permanent identity (MIN or IMSI). SC conceals the MSs permanent identity on the air interface and thereby protects the subscriber from fraudulent use of the MSs permanent identity. The wireless system should periodically reassign the TMSI. This further reduces the po

25、ssibility of associating the TMSI with the subscribers permanent identity. The TMSI should be reassigned in a manner that does not reveal the MSs permanent identity. When an MS with a previously assigned TMSI roams into a new system that is SC capable, the MS may not send its permanent identity over

26、 the air interface to the new system. It may send its TMSI only. The new system should uniquely identify the MS using this TMSI to obtain the MSs permanent identity and subscriber information through intersystem transactions. On the other hand, if an MSs TMSI is reestablished in each new system, int

27、ersystem transactions will not be needed. The wireless serving system shall provide system integrity when assigning TMSIs such that each assigned TMSI uniquely identifies a single subscriber within that wireless serving system. If the wireless system is not able to support SC, the wireless system shall allow the MS to operate with the permanent identity even though a TMSI was previously assigned in another system. (This page intentionally left blank.)