ANSI TIA-855-A-2011 Telecommunications Telephone Terminal Equipment Stutter Dial Tone Detection Device Performance Requirements《通讯.电话终端设备.黑白干扰拨号音检测设备.性能要求》.pdf

1、 TIA-855-A June 2011Telecommunications Telephone Terminal Equipment Stutter Dial Tone Detection Device Performance Requirements ANSI/TIA-855-A-2011 APPROVED: JUNE 24, 2011 REAFFIRMED: JUNE 14, 2016 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through el

2、iminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shal

3、l not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or international

4、ly. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This

5、 Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before

6、its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. SP-3-4159-RV1-RF1, formulated under the cognizance of the formulated under the cognizance of the TI

7、A TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current

8、 Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This docum

9、ent is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA web

10、site (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any ot

11、her body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or c

12、opyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no

13、position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether pr

14、oposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to

15、 a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in

16、the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedu

17、res for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or p

18、ublished pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMP

19、LIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS AN

20、Y AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED

21、OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR L

22、OSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE US

23、E OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-855-A i TABLE OF CONTENTS 1. SCOPE _ 1 2. NORMATIVE REFERENCES _ 2 3. ABBREVIATIONS, ACRONYMS, AND DEFINITIONS _ 3 3.1. ABBREVIATIONS AND ACRONYMS _ 3 3.2. DEFINITIONS _ 3 4. TECHNICAL CRITERIA F

24、OR SDT CPE _ 4 4.1. VOICEMAIL AND SDT _ 4 4.2. SDT SIGNALING PARAMETERS _ 4 4.3. AUTOMATIC STUTTER DIAL TONE DETECTION DEVICE _ 5 4.4. DISABLING SDT CHECKING _ 5 4.5. MULTIPLE SDT CPE INTERWORKING _ 5 4.6. LINE AND CPE STATES _ 6 4.7. GENERAL TEST CONDITIONS _ 6 4.8. EVENTS TRIGGERING AUTOMATIC SDT

25、CHECKING _ 6 4.9. IN-USE EVENT _ 7 4.10. IN-USE AND IDLE DC VOLTAGES _ 7 4.11. UNANSWERED RING EVENT _ 8 4.12. UNANSWERED RING EVENT TIMING _ 8 4.13. POWER RINGING PARAMETERS _ 9 4.14. AUTOMATIC SDT CHECK TIMING _ 9 4.15. INTERACTION OF AUTOMATIC SDT CHECKS _ 9 4.16. AUTOMATIC SDT CHECK _ 10 4.16.1.

26、 Automatic SDT Check Timing Parameters_ 10 4.16.2. Non-Blocking Of Dial Tone _ 11 4.16.3. Automatic SDT Detector Immunity to Noise _ 12 4.17. AUTOMATIC SDT CHECK SYNCHRONIZATION _ 12 4.18. INTERACTION WITH VMWI _ 12 4.19. INTERACTION WITH LINE IN-USE FEATURE _ 13 4.20. NON-AUTOMATIC SDT CHECK _ 14 4

27、.20.1. Verification of Non-Automatic Stutter Dialtone Detection _ 14 4.20.2. Non-Automatic Stutter Dialtone Detection Immunity To Interference _ 14 4.20.2.1. Immunity To Speech Interference _15 4.20.2.2. Immunity To DTMF and Pulse Dialing Signals _17 4.20.2.3. Immunity To SDT and DT Detection For An

28、 Incoming Call _17 ANNEX A (INFORMATIVE) ANSI/TIA-968-B-2009 (SUB-CLAUSE 5.1.7.3.2) STANDARD _ A ANNEX B (INFORMATIVE) VERIFICATION OF CPE NON-AUTOMATIC SDT CHECK CAPABILITY _ B ANNEX C (INFORMATIVE) CPE SDT ENABLE/DISABLE OPTION _ C TIA-855-A ii Table of Figures Figure 1 In-Use Event with Dial Tone

29、 . 7 Figure 2 In-Use Event without Dial Tone 7 Figure 3 Unanswered Ring Event Timing . 9 Figure 4 Automatic SDT Check Timing with Dial Tone . 11 Figure 5 Automatic SDT Check Timing with Dial Tone . 11 Table of Tables Table 1 SDT/DT Parameters 4 Table 2 Required DC Operating Parameters 8 Table 3 Exte

30、nded DC Operating Parameters . 8 Table 4 SDT/DT Immunity to Noise . 12 Table 5 SDT Talkoff Performance Requirements . 15 Table 6 DT Talkoff Performance Requirements 15 TIA-855-A iii FOREWORD (This foreword is not part of this Standard.) This document is a TIA Telecommunications standard produced by

31、Working Group TR-41.3.2 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR-41.3, which served as the formulating group. This document includes annexes which are inform

32、ative only, and are not considered a part of this standard The leadership of the TR-41.3.2 Stutter Dial Tone Detection Device Performance Working Group (Chair: James Bress, AST Technology Labs, Inc.) acknowledges the written contributions provided by the following individuals in the development of t

33、his standard. Organization Representative Previous Version TIA-855-A AST Technology Labs James Bress Editor Notify Corp. Greg Neal Editor David Stenner Advent Instruments Inc. Clint Pinkham Atlinks Ken MacDonald Microtronix Philip Ching Mitel Corp. Cliff Chammey Sprint Amar Ray Sprint Stan Peitrowic

34、z Telcordia Technologies Al Baum Uniden Stephen Whitesell Vtech Communications Steve Kropp VTech Engineering Suggestions for improvement of this standard are welcome. They should be sent to: Telecommunications Industry Association Engineering Department Suite 300 250 Wilson Boulevard Arlington, VA 2

35、2201 ( http:/www.tiaonline.org ) TIA-855-A 1 Telephone Terminal Equipment Stutter Dial Tone Detection Device Performance Requirements 1. SCOPE This document provides specifications for Customer Premises Equipment (CPE) devices designed to automatically detect stutter dial tone (SDT) on an analog tel

36、ephone line. TIA-968-B includes regulatory requirements related to automatic stutter dialtone detection devices for connection to the network. This standard includes criteria to meet the TIA-968-B requirements and additional requirements for the performance of these devices. This document also provi

37、des specifications for CPE regarding the interaction between Stutter Dial Tone Detection and Visual Message Waiting Indication features. TIA-855-A 2 2. NORMATIVE REFERENCES The following standards contain provisions, which, through reference in this text, constitute provisions of this standard. At t

38、he time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of c

39、urrently valid national standards. ANSI/TIA-470.210-D-2010, Telecommunications - Telephone Terminal Equipment Resistance and Impedance Performance Requirements for Analog Telephones ANSI/TIA-470.220-C-2004, Telecommunications - Telephone Terminal Equipment Alerter Acoustic Output Performance Require

40、ments for Analog Telephones ANSI/TIA-777-A-2003, Telecommunications Telephone Terminal Equipment Caller Identity and Visual Message Waiting Indicator Equipment Performance Requirements ATIS-0600401.2006, Telecommunications - Network-to-Customer Installation Interfaces - Analog Voicegrade Switched Ac

41、cess Lines Using Loop-Start and Ground-Start Signaling ATIS-0600401.02.2000 (R2010), Telecommunications - Network-to-Customer Installation Interfaces -Analog Voicegrade Switched Access Lines with Distinctive Ringing Features ATIS-0600401.03.1998 (R2010), Telecommunications Network-to-Customer Instal

42、lation Interfaces Analog Voicegrade Switched Access Lines with Calling Number Delivery, Calling Name Delivery, or Visual Message-Waiting Indicator Features Telcordia Technologies, SR-3004 Issue 2, January 1995, Testing Guidelines for Analog Type 1, 2, and 3 CPE as Described in SR-INS-002726 Telcordi

43、a Technologies, SR-TSV-002476, Issue 1, December 1992 (plus bulletin No 1, September 1993), Customer Premises Equipment Compatibility Considerations for the Voiceband Data Transmission Interface. TIA-855-A 3 3. ABBREVIATIONS, ACRONYMS, AND DEFINITIONS 3.1. ABBREVIATIONS AND ACRONYMS For the purposes

44、 of this Standard, the following abbreviations and acronyms apply. ASL Active Speech Level CAS CPE Alerting Signal CO Central Office (Used broadly to describe the telephone switch connected to a subscribers line) CPE Customer Premises Equipment CPT Call Progress Tone DT Dial Tone (regular continuous dial tone) FSK Frequency Shift Keying SDT Stutter Dial Tone SNR Signal to Noise Ratio VMWI Visual Message Waiting Indicator 3.2. DEFINITIONS For the purposes of this Standard, the foll