ANSI TIA-920.110-B-2015 Telecommunications Communications Products Transmission Requirements for Digital Interface Communications Devices with Handsets.pdf

1、 TIA-920.110-B October 2015 Telecommunications Communications Products Transmission Requirements for Digital Interface Communications Devices with Handsets ANSI/TIA-920.110-B-2015 APPROVED: OCTOBER 22, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest t

2、hrough eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publicat

3、ions shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or inte

4、rnationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publicat

5、ion. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitation

6、s before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-920.110-B-D1, formulated under the cognizance of the TIA TR-41 User

7、 Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of T

8、IA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyri

9、ghted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tia

10、online.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in i

11、ts present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, ow

12、ned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with

13、 reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licens

14、ing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document p

15、ublished by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Proce

16、dures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for Ameri

17、can National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pend

18、ing patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DIS

19、CLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RES

20、PONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED T

21、O COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT L I M I T A T I O N A N Y A N D A L L INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDIN G D A M A G

22、E S F O R L O S S O F BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL EL

23、EMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-920.110-B TABLE OF CONTENTS FOREWORD vi INTRODUCTION viii 1 SCOPE 1 1.1 FCC PART 68 1 1.2 ENVIRONMENTAL . 1 1.3 SAFETY . 1 2 NORMATIVE REFERENCES 2 3 DEFINITIONS, ABBREVIATIONS AND

24、 ACRONYMS 3 3.1 DEFINITIONS . 3 3.2 ABBREVIATIONS AND ACRONYMS . 4 4 TESTING CONSIDERATIONS 6 4.1 GENERAL 6 4.1.1 Acoustic Test Interface Equipment .6 4.1.2 Test Signals .6 4.1.3 Test Position 6 4.1.4 Test Methods .6 4.1.5 Test Points and Range of Requirements 6 4.1.6 Subjective Tests .6 4.1.7 Test

25、Environment Background Noise 6 4.2 REFERENCE CODECS 7 4.2.1 IETF RFC 3551 L16-256 Wideband Reference Codec 7 4.2.2 ITU-T Recommendation G.711 Narrowband Reference Codec .8 4.2.3 Other Reference Codecs 8 4.3 PRECAUTIONS. 8 4.4 TEST ARRANGEMENTS . 9 4.4.1 Reference Codec Arrangement .9 4.4.2 Direct Di

26、gital Signal Generation and Analysis Arrangement .9 4.4.3 Receive General Test Setup Arrangement 10 4.4.4 Send General Test Setup Arrangement .10 4.4.5 Sidetone General Test Setup Arrangement .10 4.4.6 Terminal Coupling Loss Test Setup Arrangement 11 5 TECHNICAL REQUIREMENTS 12 5.1 CATEGORIES OF CRI

27、TERIA . 12 5.2 COMPLIANCE WITH THE STANDARD 12 5.3 RECEIVE PERFORMANCE 13 5.3.1 Listener Reference Point .13 5.3.2 Determination of Nominal Volume Control Setting .13 5.3.3 Receive Frequency Response 14 5.3.4 Receive Output 17 5.3.5 Receive Volume Control Conversational Gain 17 5.3.6 Receive Noise I

28、dle Channel .18 5.3.7 Receive Single Frequency Interference (SFI) Idle Channel .18 i TIA-920.110-B 5.3.8 Receive Noise Active Channel .19 5.3.9 Receive Distortion and Noise 19 5.3.10 Receive Distortion Maximum Volume Control Setting 20 5.3.11 Receive Delay 20 5.3.12 Receive Comfort Noise (Advisory)

29、.21 5.3.13 Magnetic Field for Hearing Aid Coupling 22 5.4 SEND PERFORMANCE . 23 5.4.1 Send Frequency Response .23 5.4.2 Send Output .26 5.4.3 Send Noise Without Stimulus 26 5.4.4 Send Single Frequency Interference (SFI) Idle Channel 26 5.4.5 Send Noise With Stimulus .27 5.4.6 Send Distortion and Noi

30、se .27 5.4.7 Send Delay 28 5.5 TALKER SIDETONE PERFORMANCE 29 5.5.1 Sidetone Masking Rating (STMR) 29 5.5.2 Sidetone Delay 29 5.6 ECHO RETURN LOSS AND STABILITY. 31 5.6.1 Weighted Terminal Coupling Loss (TCLw) .31 5.6.2 Stability Loss .32 5.7 OBJECTIVE SPEECH QUALITY 34 ANNEX A (NORMATIVE) CALCULATI

31、ON OF LOUDNESS RATINGS AND SIDETONE MASKING RATING . 35 A.1 SEND LOUDNESS RATING: . 35 A.2 RECEIVE LOUDNESS RATING: 36 A.3 SIDETONE MASKING RATING: 36 ANNEX B (NORMATIVE) DRP TO FF AND DRP TO DF TRANSFER FUNCTIONS 39 B.1 DRP TO FF TRANSFER FUNCTION 39 B.2 DRP TO DF TRANSFER FUNCTION . 41 ANNEX C (NO

32、RMATIVE) DRP TO ERP TRANSFER FUNCTION . 43 ANNEX D (NORMATIVE) A-WEIGHTING CURVE . 45 ANNEX E (NORMATIVE) PULSED NOISE SIGNAL-TO-DISTORTION-AND-NOISE RATIO (PN-SDNR) . 46 ANNEX F (INFORMATIVE) RECOMMENDATIONS FOR SUBJECTIVE QUALITY EVALUATION. 49 F.1 SEND LOUDNESS 50 F.2 SEND NOISE 50 F.3 SEND DISTO

33、RTION 50 F.4 RECEIVE LOUDNESS . 51 F.5 RECEIVE NOISE 51 F.6 RECEIVE DISTORTION 52 F.7 ACOUSTIC ECHO CANCELLATION PERFORMANCE DURING SINGLE-TALK 52 F.8 ACOUSTIC ECHO CANCELLATION PERFORMANCE DURING DOUBLE-TALK 53 ii TIA-920.110-B ANNEX G (INFORMATIVE) RECOMMENDATIONS FOR OBJECTIVE SOUND QUALITY EVALU

34、ATION. 54 G.1 GENERAL INFORMATION 54 G.2 SEND SPEECH QUALITY IN THE PRESENCE OF BACKGROUND NOISE . 54 G.3 OBJECTIVE LISTENING QUALITY (MOS-LQO) 55 ANNEX H (INFORMATIVE) VOLUME CONTROL RESET AND OVERRIDE INFORMATION 57 ANNEX I (INFORMATIVE) RECEIVE ASSISTIVE FEATURES . 58 I.1 HANDSET RECEIVE TONE CON

35、TROL 58 I.2 HANDSET RECEIVE AUTOMATIC GAIN CONTROL (AGC) 58 I.3 HANDSET RECEIVE AUTOMATIC LEVEL ENHANCEMENT (ALE) . 58 ANNEX J (INFORMATIVE) MEASUREMENT AND LEVEL CONVERSIONS . 59 ANNEX K (INFORMATIVE) ISO FREQUENCIES . 60 ANNEX L (INFORMATIVE) CODEC REFERENCE POINT DEFINITIONS 62 ANNEX M (INFORMATI

36、VE) BIBLIOGRAPHY 64 iii TIA-920.110-B TABLE OF FIGURES Figure 1 Digital Communications Device Test Arrangement with Reference Codec . 9 Figure 2 Digital Communications Device Test Arrangement using Direct Digital . 9 Figure 3 Receive Test Setup Arrangement 10 Figure 4 Send Test Setup Arrangement . 1

37、0 Figure 5 Test Circuit for Sidetone Measurements . 10 Figure 6 Terminal Coupling Loss Test Setup Arrangement 11 Figure 7 Wideband Receive Frequency Response Limits . 15 Figure 8 Narrowband Receive Frequency Response Limits 16 Figure 9 Wideband Send Frequency Response Limits 24 Figure 10 Narrowband

38、Send Frequency Response Limits . 25 Figure 11 Reference Corner . 33 Figure B.1 DRP to FF Transformation Curve 40 Figure B.2 DRP to DF Transformation Curve . 42 Figure C.1 DRP to ERP Transformation Curve . 44 Figure D.1 A-Weighting Curve . 45 Figure E.1 Stimulus, Measurement, and Analysis Bands for P

39、N-SDNR . 46 iv TIA-920.110-B TABLE OF TABLES Table 1 L16-256 Periodic Sequence for Producing a 1 kHz, 0 dBm0 Sine Wave . 7 Table 2 G.711 Periodic Sequence for Producing a 1 kHz, 0 dBm0 Sine Wave 8 Table 3 Wideband Receive Frequency Response Limits . 15 Table 4 Narrowband Receive Frequency Response L

40、imits . 16 Table 5 Receive Delay Requirements 20 Table 6 Wideband Send Frequency Response Limits 24 Table 7 Narrowband Send Frequency Response Limits 25 Table 8 Send Delay Requirements . 28 Table A.1 Weighting Factors for Wideband Loudness Ratings and Sidetone Masking Rating 37 Table A.2 Weighting F

41、actors for Narrowband Loudness Ratings . 38 Table B.1 DRP to FF Transformation Values at 1/12 thOctave Center Frequencies . 39 Table B.2 DRP to FF Transformation Values at R40 Frequencies 40 Table B.3 DRP to DF Transformation Values at 1/12 thOctave Center Frequencies . 41 Table B.4 DRP to DF Transf

42、ormation Values at R40 Frequencies . 42 Table C.1 DRP to ERP Correction Factors at 1/12 thOctave Frequencies . 43 Table C.2 DRP to ERP Correction Factors at R40 Frequencies 44 Table D.1 A-Weighting Curve . 45 Table E.1 Stimulus and Stimulus Measurement Bands for PN-SDNR 47 Table E.2 Distortion Analy

43、sis Notch Bands for PN-SDNR 48 Table G.1 MOS-LQO Recommendations 54 Table G.2 Receive MOS-LQO Recommendations 55 Table G.3 Send MOS-LQO Recommendations . 56 Table K.1 ISO R-40, ISO R-10, 1/12 thOctave and 1/3 rdOctave Frequencies . 60 Table L.1 0 dBm0 Reference Point for Various Codecs 62 v TIA-920.

44、110-B FOREWORD (This foreword is not part of this standard.) This document is a TIA Telecommunications standard produced by Working Group TR-41.3.3 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group

45、 and its parent Subcommittee TR-41.3, which served as the formulating group. There are thirteen annexes in this Standard. Annexes A E are normative and are considered part of this Standard. Annexes F M are informative and are not considered part of this Standard. The leadership of the TR-41.3.3 VoIP

46、 and PCM Transmission Performance Working Group (Chair: Allen Woo, Plantronics) acknowledges the written contributions provided by the following individuals in the development of this standard. Organization Representative Previous Version TIA-920.110-B Whitesell Consulting LLC Steve Whitesell Editor

47、 Texas Instruments Tom Harley Editor Texas Instruments Warren Karapetian Editor AST Technology Labs, Inc. Don McKinnon Editor AST Technology Labs, Inc. James Bress Bob Young & Associates Bob Young Century Link Amar Ray Cisco Systems Tim Lawler Consultant in Electroacoustics John Bareham IEEE Working Group on Communication Electroacoustics John Bareham Industry Canada Jason Nixon Industry Canada Magdoly Rondon Microsoft Hong Sodoma MWM Acoustics Glenn Hess Nortel Networks Roger Britt Plantronics Steve Graham Plantronics Bill Rains Plantronics Allen Woo Uniden Al Baum VTech Steve Whitesell vi