1、 TIA STANDARD Recommended Minimum Performance Standards for cdma2000Spread Spectrum Mobile Stations TIA-98-F (Revision of TIA-98-E) July 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance ANSI/TIA-98-F 2005
2、Approved: February 16, 2005Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through el
3、iminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shal
4、l not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or international
5、ly. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This
6、 Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before
7、its use. (From Standards Proposal No. 3-4383-RV6, formulated under the cognizance of the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: P
8、lease refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights
9、reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in
10、 hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details a
11、re located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or
12、changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. W
13、hen IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into,
14、 the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not
15、warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products,
16、 designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS ME
17、RCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION,
18、 OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLU
19、DING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN
20、IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with
21、 EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-98-F CONTENTS i NORMATIVE REFERENCES xli 1 1 INTRODUCTION .1-1 2 1.1 Scope1-1 3 1.2 Terms and Definitions.1-1 4 1.3 Test Modes1-16 5 1.4 CDMA Equations 1-17 6 1.4.1 Transmit Power of the Base Station.1-17 7 1.
22、4.2 Received Signal Strength for Mobile Station Not in Handoff.1-18 8 1.4.2.1 Single-Path Case .1-18 9 1.4.2.2 Two-Path Case.1-20 10 1.4.2.3 Three-Path Case 1-20 11 1.4.3 Received Signal Strength for Mobile Station in Two-Way Handoff 1-21 12 1.5 Tolerances 1-22 13 1.5.1 CDMA System Parameter Toleran
23、ces.1-22 14 1.5.2 Measurement Tolerances.1-22 15 1.6 Test Requirements for Mobile Stations Supporting Analog Operation1-22 16 1.6.1 Modulated Tone Frequency .1-22 17 2 STANDARD RADIATED EMISSIONS MEASUREMENT PROCEDURE.2-1 18 2.1 Standard Radiation Test Site 2-1 19 2.2 Search Antenna 2-1 20 2.3 Field
24、-Strength Measurement.2-2 21 2.4 Frequency Range of Measurements.2-2 22 2.5 Test Ranges 2-2 23 2.5.1 30-Meter Test Range .2-2 24 2.5.2 3-Meter Test Range .2-3 25 2.6 Radiated Signal Measurement Procedures 2-3 26 3 CDMA RECEIVER MINIMUM STANDARDS.3-1 27 3.1 Frequency Coverage Requirements .3-1 28 3.2
25、 Acquisition Requirements .3-1 29 3.2.1 Idle Handoff Tests .3-1 30 3.2.1.1 Idle Handoff in Non-Slotted Mode on the Paging Channel 3-1 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from
26、IHS-,-,-TIA-98-F CONTENTS ii 3.2.1.1.1 Definition3-1 1 3.2.1.1.2 Method of Measurement3-1 2 3.2.1.1.3 Minimum Standard.3-3 3 3.2.1.2 Idle Handoff in Slotted Mode on the Paging Channel . 3-4 4 3.2.1.2.1 Definition3-4 5 3.2.1.2.2 Method of Measurement3-4 6 3.2.1.2.3 Minimum Standard.3-6 7 3.2.1.3 Idle
27、 Handoff in Slotted Mode on the Forward Common Control 8 Channel 3-6 9 3.2.1.3.1 Definition3-6 10 3.2.1.3.2 Method of Measurement3-6 11 3.2.1.3.3 Minimum Standard.3-8 12 3.2.1.4 Idle Handoff to Another Frequency 3-9 13 3.2.1.4.1 Definition3-9 14 3.2.1.4.2 Method of Measurement3-9 15 3.2.1.4.3 Minimu
28、m Standard.3-15 16 3.2.2 Soft Handoff Tests.3-15 17 3.2.2.1 Neighbor Set Pilot Detection and Incorrect Detection in Soft Handoff 3-15 18 3.2.2.1.1 Definition3-15 19 3.2.2.1.2 Method of Measurement3-15 20 3.2.2.1.3 Minimum Standard.3-19 21 3.2.2.2 Candidate Set Pilot Detection and Incorrect Detection
29、 in Soft 22 Handoff . 3-20 23 3.2.2.2.1 Definition3-20 24 3.2.2.2.2 Method of Measurement3-20 25 3.2.2.2.3 Minimum Standard.3-23 26 3.2.2.3 Active Set Pilot Loss Detection in Soft Handoff 3-23 27 3.2.2.3.1 Definition3-23 28 3.2.2.3.2 Method of Measurement3-23 29 3.2.2.3.3 Minimum Standard.3-26 30 3.
30、2.3 Access and Access Probe Handoff Tests 3-26 31 3.2.3.1 Access Probe Handoff 3-26 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-98-F CONTENTS iii 3.2.3.1.1 Definition
31、 3-26 1 3.2.3.1.2 Method of Measurement3-27 2 3.2.3.1.3 Minimum Standard .3-29 3 3.2.3.2 Access Handoff 3-30 4 3.2.3.2.1 Definition 3-30 5 3.2.3.2.2 Method of Measurement3-30 6 3.2.3.2.3 Minimum Standard .3-32 7 3.2.4 Candidate Frequency Single Search 3-33 8 3.2.4.1 Definition 3-33 9 3.2.4.2 Method
32、of Measurement 3-33 10 3.2.4.3 Minimum Standard .3-35 11 3.3 Forward Common Channel Demodulation Performance 3-35 12 3.3.1 Demodulation of Non-Slotted Mode Paging Channel3-35 13 3.3.1.1 Definition 3-36 14 3.3.1.2 Method of Measurement 3-36 15 3.3.1.3 Minimum Standard .3-36 16 3.3.2 Demodulation of S
33、lotted Mode Paging Channel .3-37 17 3.3.2.1 Definition 3-37 18 3.3.2.2 Method of Measurement 3-37 19 3.3.2.3 Minimum Standard .3-38 20 3.3.3 Demodulation of Broadcast Control Channel in AWGN Channel3-39 21 3.3.3.1 Definition 3-39 22 3.3.3.2 Method of Measurement 3-39 23 3.3.3.3 Minimum Standard .3-4
34、0 24 3.3.4 Demodulation of Broadcast Control Channel in Multipath Fading 25 Channel 3-40 26 3.3.4.1 Definition 3-40 27 3.3.4.2 Method of Measurement 3-40 28 3.3.4.3 Minimum Standard .3-41 29 3.3.5 Demodulation of Forward Common Control Channel.3-42 30 3.3.5.1 Definition 3-42 31 3.3.5.2 Method of Mea
35、surement 3-42 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-98-F CONTENTS iv 3.3.5.3 Minimum Standard. 3-43 1 3.3.6 Demodulation of Common Assignment Channel and Recept
36、ion of 2 Common Power Control Channel 3-43 3 3.3.6.1 Definition 3-43 4 3.3.6.2 Method of Measurement 3-44 5 3.3.6.3 Minimum Standard. 3-45 6 3.3.7 Demodulation of Forward Packet Data Control Channel in Additive White 7 Gaussian Noise.3-45 8 3.3.7.1 Definition 3-45 9 3.3.7.2 Method of Measurement 3-4
37、6 10 3.3.7.3 Minimum Standard. 3-47 11 3.3.8 Demodulation of Forward Packet Data Control Channel in Soft and 12 Softer Handoff.3-48 13 3.3.8.1 Definition 3-48 14 3.3.8.2 Method of Measurement 3-48 15 3.3.8.3 Minimum Standard. 3-52 16 3.4 Forward Traffic Channel Demodulation Performance3-54 17 3.4.1
38、Demodulation of Forward Fundamental Channel in Additive White 18 Gaussian Noise.3-54 19 3.4.1.1 Definition 3-54 20 3.4.1.2 Method of Measurement 3-54 21 3.4.1.3 Minimum Standard. 3-55 22 3.4.2 Demodulation of Forward Fundamental Channel in Multipath Fading 23 Channel3-55 24 3.4.2.1 Definition 3-55 2
39、5 3.4.2.2 Method of Measurement 3-56 26 3.4.2.3 Minimum Standard. 3-57 27 3.4.3 Demodulation of Forward Fundamental Channel During Soft Handoff3-58 28 3.4.3.1 Definition 3-58 29 3.4.3.2 Method of Measurement 3-58 30 3.4.3.3 Minimum Standard. 3-58 31 3.4.4 Decision of Power Control Bit for Channels B
40、elonging to Different Power 32 Control Sets During Soft Handoff3-59 33 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-98-F CONTENTS v 3.4.4.1 Definition 3-59 1 3.4.4.2 Meth
41、od of Measurement 3-59 2 3.4.4.3 Minimum Standard .3-60 3 3.4.5 Decision of Power Control Bit for Channels Belonging to the Same Power 4 Control Set3-60 5 3.4.5.1 Definition 3-60 6 3.4.5.2 Method of Measurement 3-60 7 3.4.5.3 Minimum Standard .3-62 8 3.4.6 Demodulation of Power Control Subchannel Du
42、ring Soft Handoff .3-62 9 3.4.6.1 Definition 3-62 10 3.4.6.2 Method of Measurement 3-62 11 3.4.6.3 Minimum Standard .3-64 12 3.4.7 Demodulation of Forward Traffic Channel in Multipath Fading Channel 13 with Closed Loop Power Control (FPC_MODE = 000)3-64 14 3.4.7.1 Definition 3-64 15 3.4.7.2 Method o
43、f Measurement 3-64 16 3.4.7.3 Minimum Standard .3-65 17 3.4.8 Demodulation of Forward Traffic Channel in Multipath Fading Channel 18 with Closed Loop Power Control (FPC_MODE = 010)3-66 19 3.4.8.1 Definition 3-66 20 3.4.8.2 Method of Measurement 3-66 21 3.4.8.3 Minimum Standard .3-67 22 3.4.9 Demodul
44、ation of Forward Traffic Channel in Multipath Fading Channel 23 with Outer Loop Power Control and Closed Loop Power Control 24 (FPC_MODE = 000, 001 and 010)3-67 25 3.4.9.1 Definition 3-67 26 3.4.9.2 Method of Measurement 3-67 27 3.4.9.3 Minimum Standard .3-68 28 3.4.10 Demodulation of Forward Traffi
45、c Channel in Multipath Fading Channel 29 with Closed Loop Power Control (FPC_MODE = 000) and Transmit 30 Diversity (OTD or STS).3-69 31 3.4.10.1 Definition 3-69 32 3.4.10.2 Method of Measurement 3-69 33 3.4.10.3 Minimum Standard .3-70 34 Copyright Telecommunications Industry Association Provided by
46、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-98-F CONTENTS vi 3.4.11 Demodulation of Forward Traffic Channel in Multipath Fading Channel 1 with Closed Loop Power Control (FPC_MODE = 010) and Transmit 2 Diversity (OTD or STS) 3-70 3
47、3.4.11.1 Definition 3-70 4 3.4.11.2 Method of Measurement 3-70 5 3.4.11.3 Minimum Standard. 3-71 6 3.4.12 Demodulation of Power Control Subchannel During Reverse Pilot 7 Channel Gating.3-72 8 3.4.12.1 Definition 3-72 9 3.4.12.2 Method of Measurement 3-72 10 3.4.12.3 Minimum Standard. 3-72 11 3.4.13
48、Demodulation of Power Control Subchannel During Reverse 12 Fundamental Channel Gating.3-73 13 3.4.13.1 Definition 3-73 14 3.4.13.2 Method of Measurement 3-73 15 3.4.13.3 Minimum Standard. 3-73 16 3.4.14 Demodulation of Forward Packet Data Channel in Additive White 17 Gaussian Noise.3-73 18 3.4.14.1
49、Definition 3-74 19 3.4.14.2 Method of Measurement 3-74 20 3.4.14.3 Minimum Standard. 3-74 21 3.4.15 Demodulation of Forward Packet Data Channel in Multipath Fading 22 Channel with no Power Control.3-75 23 3.4.15.1 Definition 3-75 24 3.4.15.2 Method of Measurement 3-75 25 3.4.15.3 Minimum Standard. 3-76 26 3.5 Receiver Performance .3-76 27 3.5.1 Receiver Sensitivity and Dynamic Range.3-76 28 3.5.1.1
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1