ANSI TIR11139-2006 Sterilization of health care products Vocabulary.pdf

1、 Technical Information Report ANSI/AAMI/ISO TIR11139:2006Sterilization of health care products Vocabulary The Objectives and Uses of AAMI Standards andRecommended PracticesIt is most important that the objectives and potential uses of an AAMIproduct standard or recommended practice are clearly under

2、stood.The objectives of AAMIs technical development program derivefrom AAMIs overall mission: the advancement of medicalinstrumentation. Essential to such advancement are (1) a continuedincrease in the safe and effective application of current technologiesto patient care, and (2) the encouragement o

3、f new technologies. It isAAMIs view that standards and recommended practices cancontribute significantly to the advancement of medicalinstrumentation, provided that they are drafted with attention to theseobjectives and provided that arbitrary and restrictive uses are avoided.A voluntary standard fo

4、r a medical device recommends to themanufacturer the information that should be provided with or on theproduct, basic safety and performance criteria that should be con-sidered in qualifying the device for clinical use, and the measurementtechniques that can be used to determine whether the device c

5、onformswith the safety and performance criteria and/or to compare the per-formance characteristics of different products. Some standards em-phasize the information that should be provided with the device,including performance characteristics, instructions for use, warningsand precautions, and other

6、data considered important in ensuring thesafe and effective use of the device in the clinical environment.Recommending the disclosure of performance characteristics oftennecessitates the development of specialized test methods to facilitateuniformity in reporting; reaching consensus on these tests c

7、anrepresent a considerable part of committee work. When a draftingcommittee determines that clinical concerns warrant the establishmentof minimum safety and performance criteria, referee tests must beprovided and the reasons for establishing the criteria must bedocumented in the rationale.A recommen

8、ded practice provides guidelines for the use, care,and/or processing of a medical device or system. A recommendedpractice does not address device performance per se, but ratherprocedures and practices that will help ensure that a device is usedsafely and effectively and that its performance will be

9、maintained.Although a device standard is primarily directed to the manufac-turer, it may also be of value to the potential purchaser or user of thedevice as a fume of reference for device evaluation. Similarly, eventhough a recommended practice is usually oriented towards healthcare professionals, i

10、t may be useful to the manufacturer in betterunderstanding the environment in which a medical device will beused. Also, some recommended practices, while not addressing deviceperformance criteria, provide guidelines to industrial personnel onsuch subjects as sterilization processing, methods of coll

11、ecting data toestablish safety and efficacy, human engineering, and otherprocessing or evaluation techniques; such guidelines may be useful tohealth care professionals in understanding industrial practices.In determining whether an AAMI standard or recommendedpractice is relevant to the specific nee

12、ds of a potential user of thedocument, several important concepts must be recognized:All AAMI standards and recommended practices are voluntary(unless, of course, they are adopted by government regulatory orprocurement authorities). The application of a standard or recom-mended practice is solely wi

13、thin the discretion and professionaljudgment of the user of the document.Each AAMI standard or recommended practice reflects thecollective expertise of a committee of health care professionals andindustrial representatives, whose work has been reviewed nationally(and sometimes internationally). As s

14、uch, the consensusrecommendations embodied in a standard or recommended practiceare intended to respond to clinical needs and, ultimately, to helpensure patient safety. A standard or recommended practice is limited,however, in the sense that it responds generally to perceived risks andconditions tha

15、t may not always be relevant to specific situations. Astandard or recommended practice is an important reference inresponsible decision-making, but it should never replace responsibledecision-making.Despite periodic review and revision (at least once every fiveyears), a standard or recommended pract

16、ice is necessarily a staticdocument applied to a dynamic technology. Therefore, a standardsuser must carefully review the reasons why the document wasinitially developed and the specific rationale for each of itsprovisions. This review will reveal whether the document remainsrelevant to the specific

17、 needs of the user.Particular care should be taken in applying a product standard toexisting devices and equipment, and in applying a recommendedpractice to current procedures and practices. While observed orpotential risks with existing equipment typically form the basis for thesafety and performan

18、ce criteria defined in a standard, professionaljudgment must be used in applying these criteria to existing equip-ment. No single source of information will serve to identify aparticular product as “unsafe“. A voluntary standard can be used asone resource, but the ultimate decision as to product saf

19、ety andefficacy must take into account the specifics of its utilization and, ofcourse, cost-benefit considerations. Similarly, a recommendedpractice should be analyzed in the context of the specific needs andresources of the individual institution or firm. Again, the rationaleaccompanying each AAMI

20、standard and recommended practice is anexcellent guide to the reasoning and data underlying its provision.In summary, a standard or recommended practice is truly usefulonly when it is used in conjunction with other sources of informationand policy guidance and in the context of professional experien

21、ce andjudgment.INTERPRETATIONS OF AAMI STANDARDSAND RECOMMENDED PRACTICESRequests for interpretations of AAMI standards and recommendedpractices must be made in writing, to the Manager for TechnicalDevelopment. An official interpretation must be approved by letterballot of the originating committee

22、and subsequently reviewed andapproved by the AAMI Standards Board. The interpretation willbecome official and representation of the Association only uponexhaustion of any appeals and upon publication of notice of interpre-tation in the “Standards Monitor“ section of the AAMI News. TheAssociation for

23、 the Advancement of Medical Instrumentationdisclaims responsibility for any characterization or explanation of astandard or recommended practice which has not been developed andcommunicated in accordance with this procedure and which is notpublished, by appropriate notice, as an official interpretat

24、ion in theAAMI News.An ANSI Technical Report prepared by AAMI ANSI/AAMI/ISO TIR11139:2006 Sterilization of health care products Vocabulary Approved 17 October 2005 by Association for the Advancement of Medical Instrumentation Registered 18 December 2005 by American National Standards Institute Abstr

25、act: Provides definitions of terms in the field of sterilization technology. It is intended to contribute fundamentally toward mutual understanding among those preparing and using standards in the field of sterilization technology. Keywords: batch, bioburden, biological indicator, calibration, chang

26、e control, chemical indicator, cleaning, corrective action, correction, culture conditions, D value, D10value, design qualification, development, dosimeter, dosimetry system, environmental control, establish, exposure time, fault, health care product(s), inactivation, installation qualification, IQ,

27、 material safety data sheet, medical device, microbial characterization, microorganism, non-biological indicator, operational qualification, OQ, packaging system, parametric release, performance qualification, PQ, preventive action, preformed sterile barrier system, process challenge device, PCD, pr

28、ocess variable, product, protective packaging, recognized culture collection, reference microorganism, requalification, services, specify, sterile, sterile barrier system, sterility, sterility assurance level, SAL, sterilization, sterilization load, sterilization process, sterilizing agent, survivor

29、 curve, terminal sterilization, test for sterility, test of sterility, validation Published by Association for the Advancement of Medical Instrumentation 1110 N. Glebe Road, Suite 220 Arlington, VA 22201-4795 2006 by the Association for the Advancement of Medical Instrumentation All Rights Reserved

30、This publication is subject to copyright claims of ISO, ANSI, and AAMI. No part of this publication may be reproduced or distributed in any form, including an electronic retrieval system, without the prior written permission of AAMI. All requests pertaining to this draft should be submitted to AAMI.

31、 It is illegal under federal law (17 U.S.C. 101, et seq.) to make copies of all or any part of this document (whether internally or externally) without the prior written permission of the Association for the Advancement of Medical Instrumentation. Violators risk legal action, including civil and cri

32、minal penalties, and damages of $100,000 per offense. For permission regarding the use of all or any part of this document, contact AAMI, 1110 N. Glebe Road, Suite 220, Arlington, VA 22201-4795. Phone: (703) 525-4890; Fax: (703) 525-1067. Printed in the United States of America ISBN 1570202508 AAMI

33、Technical Information Report A technical information report (TIR) is a publication of the Association for the Advancement of Medical Instrumentation (AAMI) Standards Board that addresses a particular aspect of medical technology. Although the material presented in a TIR may need further evaluation b

34、y experts, releasing the information is valuable because the industry and the professions have an immediate need for it. A TIR differs markedly from a standard or recommended practice, and readers should understand the differences between these documents. Standards and recommended practices are subj

35、ect to a formal process of committee approval, public review, and resolution of all comments. This process of consensus is supervised by the AAMI Standards Board and, in the case of American National Standards, by the American National Standards Institute. A TIR is not subject to the same formal app

36、roval process as a standard. However, a TIR is approved for distribution by a technical committee and the AAMI Standards Board. Another difference is that, although both standards and TIRs are periodically reviewed, a standard must be acted onreaffirmed, revised, or withdrawnand the action formally

37、approved usually every five years but at least every 10 years. For a TIR, AAMI consults with a technical committee about five years after the publication date (and periodically thereafter) for guidance on whether the document is still usefulthat is, to check that the information is relevant or of hi

38、storical value. If the information is not useful, the TIR is removed from circulation. A TIR may be developed because it is more responsive to underlying safety or performance issues than a standard or recommended practice, or because achieving consensus is extremely difficult or unlikely. Unlike a

39、standard, a TIR permits the inclusion of differing viewpoints on technical issues. CAUTION NOTICE: This AAMI TIR may be revised or withdrawn at any time. Because it addresses a rapidly evolving field or technology, readers are cautioned to ensure that they have also considered information that may b

40、e more recent than this document. All standards, recommended practices, technical information reports, and other types of technical documents developed by AAMI are voluntary, and their application is solely within the discretion and professional judgment of the user of the document. Occasionally, vo

41、luntary technical documents are adopted by government regulatory agencies or procurement authorities, in which case the adopting agency is responsible for enforcement of its rules and regulations. Comments on this technical information report are invited and should be sent to AAMI, Attn: Standards D

42、epartment, 1110 N. Glebe Road, Suite 220, Arlington, VA 22201-4795. ANSI Technical Report This AAMI TIR has been registered by the American National Standards Institute as an ANSI Technical Report. Publication of this ANSI Technical Report has been approved by the accredited standards developer (AAM

43、I). This document is registered as a Technical Report series of publications according to the Procedures for the Registration of ANSI Technical Reports. This document is not an American National Standard and the material contained herein is not normative in nature. Contents Glossary of equivalent st

44、andards .v Committee representation vii Background of AAMI adoption of ISO/TS 11139:2006 ix Forewordx Introduction .xi 1 Scope1 2 Terms and definitions1 Bibliography .8 Alphabetical Index9 2006 Association for the Advancement of Medical Instrumentation ANSI/AAMI/ISO TIR11139:2006 v Glossary of equiv

45、alent standards International standards adopted in the United States may include normative references to other international standards. For each international standard that has been adopted by AAMI (and ANSI), the table below gives the corresponding U.S. designation and level of equivalency to the i

46、nternational standard. (Note: Documents are sorted by international designation.) Other normatively referenced international standards may be under consideration for U.S. adoption by AAMI; therefore, this list should not be considered exhaustive. International designation U.S. designation Equivalenc

47、y IEC 60601-1:2005 ANSI/AAMI ES60601-1:2005 Major technical variations IEC 60601-1-2:2001 and Amendment 1:2004 ANSI/AAMI/IEC 60601-1-2:2001 and Amendment 1:2004 Identical IEC 60601-2-04:2002 ANSI/AAMI DF80:2003 Major technical variations IEC 60601-2-19:1990 and Amendment 1:1996 ANSI/AAMI II36:2004 M

48、ajor technical variations IEC 60601-2-20:1990 and Amendment 1:1996 ANSI/AAMI II51:2004 Major technical variations IEC 60601-2-21:1994 and Amendment 1:1996 ANSI/AAMI/IEC 60601-2-21 and Amendment 1:2000 (consolidated texts) Identical IEC 60601-2-24:1998 ANSI/AAMI ID26:2004 Major technical variations I

49、EC TR 60878:2003 ANSI/AAMI/IEC TIR60878:2003 Identical IEC TR 62296:2003 ANSI/AAMI/IEC TIR62296:2003 Identical IEC TR 62348:200x1 ANSI/AAMI/IEC TIR62348:2006 Identical ISO 5840:2005 ANSI/AAMI/ISO 5840:2005 Identical ISO 7198:1998 ANSI/AAMI/ISO 7198:1998/2001/(R)2004 Identical ISO 7199:1996 ANSI/AAMI/ISO 7199:1996/(R)2002 Identical ISO 10993-1:2003 ANSI/AAMI/ISO 10993-1:2003 Identical ISO 10993-2:1992 ANSI/AAMI/ISO 10993-2:1993/(R)2001 Identical ISO 10993-3:2003 ANSI/AAMI/ISO 10993-3:2003 Identical ISO 10993-4:2002 ANSI/AAMI/ISO 10993-4:2002 Identical ISO 10993-5:1999 ANSI