ANSI UL 1017-2017 UL Standard for Safety Vacuum Cleaners Blower Cleaners and Household Floor Finishing Machines (Tenth Edition Reprint with Revisions Through and Including January .pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1017 Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMI

2、SSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines,UL 1017 Tenth Edition, Dated September 15, 2017 Summary of Topics This revision

3、to new edition of ANSI/UL 1017 dated September 15, 2017, was issued to incorporate the following new and revised requirements: a) Expansion of UL 1017/CSA C22.2 No. 243 Scope, b) Addition of requirements for grounded current-carrying hoses, c) Additional requirements for vacuum cleaners intended for

4、 installation in recreational vehicle or marine vessel, d) Additional requirements for stand-alone currentcarrying hoses and motorized nozzles, e) Clarication for conducting the extreme voltage test, f) Revision of Normal Load requirements, g) French language requirements, h) Clarication of Running

5、Overload Test, i) Clarify the temperature limits for switches, relays, controls and circuit breakers, j) Clarication of ampacity limits for commercial products, k) Allowance for angled attachment plug used with an integral ALCI or GFCI plug, l) Allowance of cord tag for Markings, m) Alternative for

6、Lead in Clause 8.4.3, n) Revision of Clause 5.12.2, o) Revision of Clause 5.21.7, p) Public-Use Vacuum Cleaners, q) Exemption for Clause 2.1.1, r) Expansion of clause 7.2(b), s) Editorial Corrections The new and revised requirements are substantially in accordance with Proposal(s) on this subject da

7、ted April 14, 2017. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty

8、 of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or

9、any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of

10、the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is

11、 storing an electronic Standard on the purchasers computer system. SEPTEMBER 15, 2017 UL 1017 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 15, 2017 UL 1017 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FU

12、RTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CSA C22.2 No. 243-17 Sixth Edition Underwriters Laboratories Inc. UL 1017 Tenth Edition Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines September 15, 2017 ANSI/UL 1017-2017UL COPYRIGHTED MATERIAL NOT AUT

13、HORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the stan

14、dard may be submitted to CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages

15、bearing their date of issue. ISBN 978-1-4883-0865-9 2017 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for it

16、s improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the p

17、roposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither

18、 a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Tenth Edition. The most recent des

19、ignation of ANSI/UL 1017 as an American National Standard (ANSI) occurred on September 15, 2017. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development

20、 System (CSDS) at https:/. To purchase UL Standards, visit ULs Standards Sales Site at http:/ HowToOrder.aspx or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 7 1 Scope .8 2 General 9 2.1 Atta

21、chments .9 2.2 Fluids Proprietary 10 2.3 Instructions provided with the appliance 11 2.4 Secondary circuits .11 2.5 Equipment for recreational vehicle or marine vessel installation .11 2.6 Units of measurement11 2.7 Reference publications .11 3 Denitions 20 4 Construction.23 4.1 Components 23 4.2 En

22、closures .25 4.3 Mechanical assembly 31 4.4 Corrosion protection .32 4.5 Supply connections 33 4.6 Current-carrying parts 41 4.7 Internal wiring and external interconnections 41 4.8 Electrical insulation 45 4.9 Motors .46 4.10 Switches, relays, and similar controls .49 4.11 Controls End product test

23、 parameters .53 4.12 Capacitors.56 4.13 Lampholders.57 4.14 Receptacles .58 4.15 Spacings 60 4.16 Grounding and bonding .63 4.17 Protective devices 64 4.18 Heating elements Vacuum with steam-cleaning attachment 66 4.19 Thermal links 66 4.20 Protection against injury to persons.66 5 Tests .73 5.1 Gen

24、eral 73 5.2 Normal loads .73 5.3 Leakage current .77 5.4 Leakage current following humidity conditioning .78 5.5 Leakage current Abnormal operating conditions .79 5.6 Starting current79 5.7 Rating .80 5.8 Temperature 80 5.9 Severe operating conditions 82 5.10 Abnormal operation.82 5.11 Dielectric vo

25、ltage-withstand test 84 5.12 Resistance to moisture85 5.13 Stability .97 5.14 Strain relief 98 5.15 Switches, relays, and similar controls .98 5.16 Cord reel exing .99 SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WIT

26、HOUT PERMISSION FROM UL 5.17 Power-supply cord exing 100 5.18 Internal wiring and interconnecting cord exing .101 5.19 Physical abuse .102 5.20 Strength of handles .105 5.21 Polymeric enclosure parts 105 5.22 Polymeric materials used as structural support111 5.23 Adhesives 111 5.24 Thermoplastic mot

27、or insulation systems112 5.25 End-product arc resistance .114 5.26 Abnormal overload 114 5.27 Glow-wire end-product test .115 5.28 Blower cleaner impeller tests .115 5.29 Integral insulation .116 5.30 Testing of temperature control devices used in a vacuum with a steam-cleaning attachment .117 5.31

28、Mechanical valve endurance test118 5.32 General purpose transformers 118 5.33 Interlock system endurance Floor sweepers 119 6 Double Insulation .119 6.1 Scope 119 6.2 Denitions .120 6.3 Construction general 120 6.4 Reinforced insulation .121 6.5 Power supply cord124 6.6 Strain relief 124 6.7 Bushing

29、s 124 6.8 Capacitors.124 6.9 Extra-low voltage circuits .124 6.10 Spacings .124 6.11 Internal wiring.124 6.12 Leakage-current test.125 6.13 Dielectric voltage-withstand test .126 6.14 Insulation resistance .126 6.15 Resistance to impact test 127 6.16 Abnormal operation test127 6.17 Overload test on

30、motors .127 6.18 Investigation of armature employing reinforced insulation 128 6.19 Resistance to moisture test.129 6.20 Manufacturing and production tests .129 7 Rechargeable Battery-Powered Appliances 129 8 Current-carrying hoses and accessory electried wall valves .131 8.1 Scope 131 8.2 Construct

31、ion General .132 8.3 Tests General 133 8.4 Dielectric voltage-withstand test 133 8.5 Leakage-current test 134 8.6 Oven conditioning test 134 8.7 Voltage drop test .134 8.8 Temperature test .135 8.9 Overload test 135 8.10 Limited overcurrent test 135 8.11 Crushing test .136 8.12 Thermal shock test 13

32、7 SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 8.13 Flexing test .137 8.14 Abrasion test .138 8.15 Wet pick-up 139 8.16 Endurance test .140 8.17 Grounded hose tests 140 8.18 Marking 141 8.1

33、9 Marking 141 9 Appliances Generating Ultraviolet (UV) Radiation .142 9.1 General .142 9.2 Construction .142 9.3 Protection against injury to persons.143 9.4 Performance .144 9.5 Markings 147 9.6 Instructions 148 10 Manufacturing and Production Tests .148 10.1 Dielectric voltage-withstand.148 10.2 G

34、rounding-continuity.150 11 Marking 150 11.1 General 150 11.2 Permanence 151 11.3 Details .152 11.4 Cautionary .154 11.5 Cord tags 158 12 Instruction Manual .159 12.1 General 160 12.2 Instructions pertaining to a risk of re, electric shock, or injury to persons 160 12.3 Grounding/double insulation in

35、structions .166 12.4 Polarization instructions 168 12.5 Installation and operating instructions 168 12.6 User-maintenance instructions 171 12.7 Proprietary uid instructions 171 ANNEX A (Normative) A1 Probe Tolerances .213 ANNEX B (Normative) Tab Terminals B1 General 214 B2 Material Requirements .214

36、 B3 Dimensional Requirements .214 ANNEX C (Normative) C1 International Symbols 220 ANNEX D (Informative) Secondary Circuits and the Level of Evaluation Required D1 General 221 SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBU

37、TION WITHOUT PERMISSION FROM UL D2 Class 2 Circuits .222 D3 Limited Voltage/Current Circuits .223 D4 Limited Voltage Circuit Requirements 224 D5 Limited Energy Circuits 225 D6 Limiting Impedance Circuits 226 D7 Safety Extra-Low Voltage Circuits .228 D8 Secondary Circuit Tests 228 D8.1 General228 D8.

38、2 Maximum voltage .229 D8.3 Maximum current test for inherently limited circuits229 D8.4 Maximum power (limited energy) test230 D8.5 Limited power point determination test.230 D8.6 Power dissipation test .231 D8.7 Component failure 231 ANNEX E (Informative) E1 Test Carpet and Padding Specications 23

39、3 ANNEX F (Informative) F1 Flowchart For Polymeric Fluid Handling Components (PFHC).234 ANNEX G (Informative) Methods of Applying ISO 13849-1 to Appliances G1 General 236 G2 Risk Assessment236 G3 Residual Risk Analysis.236 G4 Performance Levels .237 ANNEX H French Language Markings This ANNEX is pro

40、vided for information only SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized CSA Group, and UL standard for Vacuum Cleaners, Blower Cleaners, and Household Floor F

41、inishing Machines. It is the sixth edition of CAN/CSA-C22.2 No. 243, and the tenth edition of UL 1017. This edition of CAN/CSA-C22.2 No. 243 supersedes the previous edition(s) published in 2015. This edition of UL 1017 supersedes the previous edition(s) published in 2015. This harmonized standard wa

42、s prepared by the CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Vacuum Cleaner industry of both the USA and Canada are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This sta

43、ndard was reviewed by the CSA Integrated Committee on Electrical Motor- and Battery-Operated Cleaning Appliances for Industrial and Commercial Use, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for E

44、lectrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the speci

45、ed number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of Harmoniza

46、tion This standard is published as an identical standard for CSA Group and UL. An identical standard is a standard that is exactly the same in technical content except for national differences resulting from conicts in codes and governmental regulations. Presentation is word for word except for edit

47、orial changes. Reasons for Differences From IEC There is no corresponding IEC standard. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the pr

48、ocedural rulesofthestandardsdevelopmentorganization.Ifmorethanoneinterpretationoftheliteraltexthasbeen identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. SEPTEMBER 15, 2017 CSA C22.2 NO. 243-17 UL 1017 7U

49、L COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Vacuum Cleaners, Blower Cleaners, And Household Floor Finishing Machines 1 Scope 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, oor sweepers, and to household use oor nishing machines to be employed in accordance with C22.1, C22.2 No. 0, and ANSI/NFPA 70. 1.2 These requirements cover: a) Household, commercial, and coin-opera