ANSI UL 122-2007 UL Standard for Safety Photographic Equipment (Fifth Edition Reprint with Revisions Through and Including July 27 2015)《摄影设备(推荐日期2006-11-17)》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 122 Photographic EquipmentUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU

2、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Photographic Equipment, UL 122 Fifth Edition, Dated October 29, 2007 Summary of Topics This revision of ANSI/UL 122 is being issued to reaffirm approval as an American National Standard. No changes in requirements are involv

3、ed. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date o

4、n which the changed requirement becomes effective. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this

5、Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots,

6、lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Stand

7、ard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviatio

8、n introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note fo

9、llowing the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JULY 27, 2015 UL 122 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIS

10、TRIBUTION WITHOUT PERMISSION FROM UL JULY 27, 2015 UL 122 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 29, 2007 (Title Page Reprinted: July 27, 2015) 1 UL 122 Standard for Photographic Equipment First Editi

11、on February, 1974 Second Edition August, 1984 Third Edition June, 1993 Fourth Edition April, 1999 Fifth Edition October 29, 2007 This ANSI/UL Standard for Safety consists of the Fifth Edition including revisions through July 27, 2015. The most recent designation of ANSI/UL 122 as a Reaffirmed Americ

12、an National Standard (ANS) occurred on July 27, 2015. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or effective date information. Any other portions of this ANSI/UL standard that were not processed in accordance with ANSI/UL requirements are noted at t

13、he beginning of the impacted sections. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are cop

14、yrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2015 UNDERWRITERS LABORATORIES INC. ANSI/UL 122-20

15、07 (R2015)UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTE

16、NTS INTRODUCTION 1 Scope .8 2 General 9 2.1 Components .9 2.2 Units of measurement .9 2.3 Undated references .9 3 Terminology 9 4 Glossary 10 CONSTRUCTION 5 Moisture Condensation .11 6 Frame and Enclosure 12 6.1 General 12 6.2 Remotely- and automatically-controlled appliances 13 6.3 Enclosure materi

17、al .16 7 Accessibility of Live Parts .17 7.1 Openings .17 7.2 Pin terminals 22 8 Mechanical Assembly 22 9 Protection Against Corrosion 23 10 Power Supply Connections 24 10.1 Cord-connected appliances 24 10.2 Permanently-connected appliances .29 11 Current-Carrying Parts 32 12 Internal Wiring 32 12.1

18、 Mechanical protection .32 12.2 Types of wire 33 12.3 Splices and connections 33 13 Grounding and Bonding .34 13.1 Grounding .34 13.2 Bonding .36 14 Interconnecting Cords and Cables 36 15 Receptacles and Connectors .38 16 Separation of Circuits .39 17 Insulating Material 39 17.1 Electrical insulatio

19、n .39 17.2 Thermal insulation 40 18 Overcurrent Protection 40 18.1 General .40 18.2 Motors 41 18.3 Lampholders and receptacles 42 18.4 Primary circuits 42 18.5 Secondary circuits 42 19 Short-Circuit and Ground-Fault Protection .43 20 Motors .44 21 Switching Devices 44 21.1 General .44 21.2 Rating 45

20、 OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 22 Lampholders .46 23 Medium- and High-Pressure Lamps .46 24 Capacitors .47 24.1 Motor and power-factor capacitors 47 24.2 Isolating capacitor

21、s .47 24.3 Interference elimination capacitors 48 24.4 Capacitor discharge 48 24.5 Capacitor rating 49 25 Transformers .49 26 Heating Elements .49 27 Printed-Wiring Boards .50 28 Lasers .50 29 Modems and Modem Cards 50 30 Spacings 51 30.1 General .51 30.2 Field-wiring terminal spacings 51 30.3 Prima

22、ry circuit spacings .52 30.4 Limited-primary circuit spacings 53 30.5 Multiple spacings .53 30.6 Barriers for spacings 53 30.7 Secondary and battery circuit spacings .54 31 Secondary and Battery Circuits .54 32 Low-Voltage, Limited-Energy Circuits 55 33 Safety Circuits 56 34 Liquid Containers, Seals

23、, and Diaphragms .56 PROTECTION AGAINST INJURY TO PERSONS 35 General 57 36 Sharp Edges .58 37 Enclosure of Moving Parts .58 38 Stability 59 39 Strength of Handles .60 40 Glass Parts 60 41 Interlocks 60 42 Surface Temperatures .63 43 Cord Flexing .64 44 Marking 66 PERFORMANCE 45 General 66 46 Resista

24、nce of Grounding Circuit 67 47 Leakage Current and Shock Current Tests .68 47.1 General .68 47.2 Leakage current 69 47.3 Shock current 73 47.4 Transient electric shock .74 47.5 Stored energy electric shock .75 47.6 Tube interchange and substitution 77 47.7 Standardized pin/socket arrangements 77 48

25、Leakage Current Following Humidity Conditioning Test 77 49 Operational Tests .78 OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 50 Starting Current Test 78 51 Input Test 79 51.1 General .79

26、51.2 Maximum normal load 79 52 Temperature Test .82 52.1 General .82 52.2 Ambient temperatures 84 52.3 Temperature measurements .85 52.4 Operation for temperature test .86 53 Potential Measurements .86 54 Electrolytic Capacitor Test .86 55 Dielectric Voltage-Withstand Test .87 55.1 Primary circuits

27、87 55.2 Limited primary circuits 88 55.3 Secondary and battery circuits .88 55.4 Interconnecting cables 89 55.5 Maximum voltage 89 56 Abnormal Operation Tests .89 56.1 General .89 56.2 Test conditions .90 56.3 Components .91 56.4 Limited primary 92 56.5 Transformers 92 56.6 Silver recovery unit .92

28、57 Ozone Test 92 58 Strength of Enclosure Test .92 58.1 General .92 58.2 Wood, glass, and metal enclosures .93 59 Strain Relief Test .93 60 Cord and Cable Push-Back Relief Test 94 61 Fluid Entry Test 94 MANUFACTURING AND PRODUCTION TESTS 62 Dielectric Voltage-Withstand Test .94 63 Electrical Continu

29、ity Test 96 63.1 Grounding continuity 96 63.2 Grounded conductor 96 RATING 64 Electrical Rating 97 MARKING 65 General 97 66 Informational .98 66.1 Identication and rating .98 66.2 Alternate supply voltages 99 66.3 Multiple factory .99 66.4 Lamp replacement .99 66.5 Other than general-purpose recepta

30、cle 99 66.6 On-off switch .100 OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 66.7 Wiring compartment .100 66.8 Use of circuit breaker or time-delay fuses 100 66.9 Projector for professional

31、 use .100 66.10 Component replacement 101 66.11 Supply circuit and overcurrent protective device .101 67 Cautionary 101 67.1 General 101 67.2 Ultraviolet lamp .102 67.3 High-pressure lamp 102 67.4 Capacitor discharge .102 67.5 Battery .102 67.6 Hot surface .103 67.7 Servicing .103 67.8 Fuse replacem

32、ent .103 67.9 Bonding 103 67.10 Flammable lm 104 67.11 Ungrounded dead-metal parts .104 67.12 Stability .104 67.13 Lasers 104 INSTRUCTIONS 68 General 105 69 Safety Instructions .105 ACCESSORY EQUIPMENT 70 General 107 71 Construction 107 72 Performance 108 72.1 General 108 72.2 Installation and opera

33、tion 108 73 Marking 108 SUPPLEMENT SA - HIGH-PRESSURE LAMPS AND LAMP SYSTEMS SA1 Scope SA1 SA2 Glossary SA1 SA3 General SA1 SA4 Enclosure .SA2 SA5 Internal Construction .SA2 SA6 General SA2 SA7 Power Input Test SA3 SA8 Normal Temperature Test SA3 SA9 Dielectric Voltage-Withstand Test SA4 SA10 Abnorm

34、al Operation Test SA4 SA11 Nonmetallic Enclosure Test SA5 SA12 Oven Conditioning SA5 SA13 Resistance to Impact Test .SA5 SA14 Ozone Test SA6 SA15 Hot Restrike Test .SA6 OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION W

35、ITHOUT PERMISSION FROM UL SA16 General .SA6 APPENDIX A Standards for ComponentsA1 OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover electricall

36、y-operated, cord-connected photographic equipment rated 300 V or less, and permanently connected photographic equipment rated 600 volts or less, intended for household or commercial use on interior wiring systems in accordance with the National Electrical Code, NFPA 70. These requirements also cover

37、 battery-powered photographic equipment involving a risk of re or electric shock. 1.2 These requirements cover motion picture projectors, including those intended for use in motion picture theaters; still picture projectors; equipment intended for use in taking photographs; accessories intended for

38、use with or installation upon picture projectors or intended to be employed in viewing, editing or handling lms, slides, pictures, drawings, or similar stationary graphic material; cameras; chemical replenishers; contact printers; enlargers; exposure meters; lm copiers, lm cutters, lm dryers; lm edi

39、tors; household lm viewers; lm and paper processors; lm rewinders, lm strip projectors; lm strip projector-phonograph combinations; lm strip projector-tape player combinations; motor-operated projector screens; silent and sound motion picture projectors; print dryers; print processors; printing ease

40、ls; opaque projectors; overhead projectors; photoash equipment; photographic timers; photometers, ash cameras; slide projectors; silver recovery units; slide projector-phonograph combinations; slide projector-tape player combinations; slide sorters; slide viewers; stripping and line-up tables; video

41、 printers; and similar equipment. 1.3 These requirements do not cover commercial lm viewers and dark room safelights, which are evaluated under the requirements for xtures and portable lamps; projector tables, which are evaluated under the requirements for utility tables; microlm and micrographic eq

42、uipment, which are evaluated under the requirements for office appliances and business equipment; or portable photographic lamps and oodlights, which are evaluated under the requirements for stage and studio lighting xtures. 1.4 Electric photographic equipment intended for use in a hazardous locatio

43、n as dened in the National Electrical Code is evaluated on the basis of its compliance with the requirements in this standard, and other appropriate examination and tests to determine whether it is acceptable for the purpose. 1.5 A product that contains features, characteristics, components, materia

44、ls, or systems new or different from those covered by the requirements in this standard, and that involves a risk of re or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally antic

45、ipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conict with specic requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the method

46、s employed for development, revision, and implementation of this standard. OCTOBER 29, 2007 PHOTOGRAPHIC EQUIPMENT - UL 122 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2, a compo

47、nent of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components generally used in the products covered by this standard. 2.1.2 A component is not required to comply with a specic requirement that: a) Involve

48、s a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.1.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.1.4 Specic co

49、mponents are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. 2.2 Units of measurement 2.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 2.3 Undated references 2.3.1 Any undated reference to a code or standard appe