ANSI UL 1316 BULLETIN-2000 Ul Standard for Safety Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products Alcohols and Alcohol-Gasoline Mixtures.pdf

1、Subject 58 (1316 and Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures (UL 1316) Underground Flammable Liquid Tanks Subscriber of ULs Listing Service for: SUBJECT: Request for Comments on Proposed Requirements for the: Ninth Edit

2、ion of the Standard for Steel Underground Tanks for Flammable and Combustible Liquids, UL 58; Second Edition of the Standard for External Corrosion Protection Systems for Steel Underground Storage Tanks, UL 1746; and, Second Edition of the Standard for Glass-Fiber Reinforced Plastic Underground Stor

3、age Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures, UL 1316; PROPOSED EFFECTIVE DATE SUMMARY OF TOPICS This bulletin proposes the following changes in requirements: The marking requirements in UL 58, UL 1316, and UL 1746, would be revised. COMMENTS DUE: November 15,2000 Attach

4、ed as Appendix A for your review and comment are proposed underground flammable and combustible liquid storage tank requirements for UL 58, UL 1316 and UL 1746. Questions regarding interpretation of requirements should be directed to the responsible UL Staff. Please see Appendix B of this bulletin r

5、egarding designated responsibility for the Subject product categories. Please note that proposed requirements are of a tentative and early nature and are for review and comment only. Current requirements are to be used to judge a product until these requirements are published in final form. PROPOSED

6、 EFFECTIVE DATE The proposed requirements in the paragraphs specified in the following table will necessitate a review of currently Listed products. Therefore, UL proposes that the new requirements become effective 24 months after publication. This is intended to provide manufacturers with sufficien

7、t time to use their SUBJECT 58 -2- OCTOBER 18,2000 current stock of labels, prepare new labels, and for UL to conduct a review of the modified labels. Please note that this also includes the time that will be needed by UL to conduct a file review. Your comments concerning the proposed effective date

8、 are welcome. Standard I Paragraphs I Proposed Effective Date 58 121.1.1 I24 months after the date of Dublication 1316 I20.3.1, 20.3.2 I24 months after the date of publication 1746 I24 months after the date of publication 24.4.1 - 24.4.3 DISCUSSION The revised marking requirements illustrated in App

9、endix A would relocate part of the product name to the Marking Sections in UL 58, UL 1316, and UL 1746. The descriptive information removed from the Listing mark would then appear on a separate label adjacent to the Listing mark label. The proposal reduces the types of Listing mark labels for underg

10、round storage tanks from 26 to 8. RATIONALE Based on comments received in response to the UL 58 (142, 1316 and 2. Your comments concerning the proposed effective date, should the proposals be adopted. Written comments should be sent to the attention of Elizabeth Sheppard at ULs Northbrook office, 33

11、3 Pfingsten Road, Northbrook, IL 60062. Comments may be sent by mail or faxed to (847) 509-6217. Please reference all correspondence to Subject 58. All comments should be sent by November 15, 2000. Unless specifically requested to do so, UL will not acknowledge comments indicating concurrence with t

12、hese proposals. UNDERWRITERS LABORATORIES INC. REVIEWED BY: ELIZABETH SHEPPARD (Ext. 43276) Project Engineer Standards Department WAYNE DOVERSBERGER (Ext. 42072) Engineering Group Leader Conformity Assessment Services 301 6B SR: AM 58BULMARK SUBJECT 58 -Al - OCTOBER 18,2000 APPENDIX A TENTATIVELY RE

13、VISED PRODUCT NAMES FOR UL LISTING MARK AND PROPOSED REQUIREMENTS AND PROPOSED EFFECTIVE DATE FOR THE: NINTH EDITION OF THE STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS, UL 58: SECOND EDITION OF THE STANDARD FOR EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUN

14、D STORAGE TANKS, UL 1746; SECOND EDITION OF THE STANDARD FOR GLASS-FIBER REINFORCED PLASTIC UNDERGROUND STORAGE TANKS FOR PETROLEUM PRODUCTS, ALCOHOLS, AND ALCOHOL- GASOLINE MIXTURES, UL 1316. For your convenience in review, proposed additions to existing requirements are shown underlined and propos

15、ed deletions are shown thed-e& . Proposed new requirements are identified by (NEW). In the case of extensively revised paragraphs, the original text is identified by (CURRENT) and is thed-e&, followed by the proposed text identified by (PROPOSED). A paragraph that is proposed to be deleted is identi

16、fied by (DELETED) and is shown thed-e&. SUBJECT 58 -A2- OCTOBER 18,2000 1. Tentatively Revised Product Names for the UL Listing Marks Tanks covered by the Underground Flammable Liquid Tanks (EGHX) category will have the product names on the UL Listing Mark revised, as shown below, if the proposed re

17、visions in items 2, 3, & 4 are adopted. (CURRENT) Underground Tank for Flammable Liquids Type I Secondary Containment Underground Tank for Flammable Liquids Type I I Secondary Containment Underground Tank for Flammable Liquids Composite Underground Tank for Flammable Liquids Type I Secondary Contain

18、ment Composite Underground Tank for Flammable Liquids Type I I Secondary Containment Composite Underground Tank for Flammable Liquids Jacketed Underground Tank for Flammable Liquids Cathodically Protected Underground Tank for Flammable Liquids Cathodically Protected Type I Secondary Containment Unde

19、rground Tank for Flammable Liquids Cathodically Protected Type II Secondary Containment Underground Tank for Flammable Liquids Nonmetallic Underground Tank for Petroleum Products Only Nonmetallic Underground Tank for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures Nonmetallic Underground

20、 Tank for Petroleum Products and Gasohol (Unleaded Gasoline and 1 O percent Maximum Ethyl Alcohol) Type I Secondary Containment Nonmetallic Underground Tank for Petroleum Products Only Type I Secondary Containment Nonmetallic Underground Tank for Petroleum Products, Alcohols, and Alcohol-Gasoline Mi

21、xtures Type I Secondary Containment Nonmetallic Underground Tank for Petroleum Products and Gasohol (Unleaded Gasoline and 10 percent Maximum Ethyl Alcohol) Type II Secondary Containment Nonmetallic Underground Tank for Petroleum Products Only Type II Secondary Containment Nonmetallic Underground Ta

22、nk for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures Type II Secondary Containment Nonmetallic Underground Tank for Petroleum Products and Gasohol (Unleaded Gasoline and 10 percent Maximum Ethyl Alcohol) Coated Underground Tanks for Flammable Liquids SUBJECT 58 -A3- OCTOBER 18,2000 Typ

23、e I Secondary Containment Coated Underground Tank for Flammable Liquids Type II Secondary Containment Coated Underground Tank for Flammable Liquids Jacketed Type Tertiary Containment Underground Tank for Flammable Liquids Tertiary Containment Nonmetallic Underground Tank for Petroleum Products Only

24、Tertiary Containment Nonmetallic Underground Tank for Petroleum Products, Alcohols and Alcohol- Gasoline Mixtures Tertiary Containment Nonmetallic Underground Tank for Petroleum Products and Gasohol (Unleaded Gasoline and 10 percent Maximum Ethyl Alcohol) (FUTURE) Steel Underground Tank for Flammabl

25、e Liquids Steel Secondary Containment Underground Tank for Flammable Liquids Nonmetallic Underground Tank for Flammable Liquids Nonmetallic Secondary Containment Underground Tank for Flammable Liquids Nonmetallic Tertiary Containment Underground Tank for Flammable Liquids External Corrosion Protecte

26、d Underground Tank for Flammable Liquids External Corrosion Secondary Containment Underground Tank for Flammable Liquids External Corrosion Tertiary Containment Underground Tank for Flammable Liquids 2. Proposed Marking Requirements for UL 58 PROPOSAL 21.1.1 When the tank has secondary containment t

27、he tank shall be marked Tvpe 1” or Tvpe 11”. The markina shall be adiacent to the conformitv mark. Added 21.1.1 effective (24 months after date of publication) 3. Revised Marking Requirements for UL 1746 PROPOSALS 24.4.1 In addition to the statements si3ecified in 24.4. the cathodicallv Drotected ta

28、nk shall be marked ”Cathodicallv Protected Steel”. When the tank has secondarv containment the tank shall be marked TvDe 1” or ”TvDe 11”. The markinas shall atmear adiacent to the conformitv mark. Added 24.4.1 effective (24 months after date of publication) SUBJECT 58 -A4- OCTOBER 18,2000 24.4.2 Eac

29、h composite steel tank shall be marked with ”Composite Steel”. When the tank has secondary containment the tank shall be additionallv marked with Tvpe 1” or Tvpe 11”. The markinas shall be adiacent to the conformitv mark. Added 24.4.2 effective (24 months after date of publication) 24.4.3 Each Jacke

30、ted steel tank shall be marked with ”Jacketed Steel”. The markinas shall atmear adiacent to the conformitv mark. Added 24.4.3 effective (24 months after date of publication) 4. Revised Marking Requirements for UL 1316 PROPOSALS 20.3.1 Each nonmetallic tank shall be marked with the liauid tvi3efs) ”F

31、or Petroleum Products Onlv”. ”For Petroleum. Alcohols. and Alcohol-Gasoline Mixtures”. or ”For Petroleum and Gasohol funleaded Gasoline and 10% Maximum Ethvl AlcoholY. The markina shall be adjacent to the conformitv mark. Added 20.3.1 effective (24 months after date of publication) 20.3.2 When the t

32、ank has secondarv containment the tank shall be marked Twe 1” or Twe 11”. The markina shall be adiacent to the conformitv mark. Added 20.3.2 effective (24 months after date of publication) SUBJECT 58 EDQX2, EGHX -B1- Northbrook WAYNE DOVERSBERGER 42072 RTP Shannon Whitley 11 358 Santa Clara Brian La

33、wton 32980 Canada Gordana Nikolic (41 6) 757-361 1 OCTOBER 18,2000 APPENDIX B DESIGNATED RESPONSIBILITY FOR UL PRODUCT CATEGORIES EGHX, UNDERGROUND FLAMMABLE LIQUID TANKS EDQX, STORAGE TANKS EDQX2, STORAGE TANK COMPONENTS The individuals shown in the following table are involved with the investigati

34、on of products covered under the subject categories. The Primary Designated Engineer (shown in UPPERCASE letters) coordinates the establishment and uniform interpretation of UL requirements applicable to the product categories. The Designated Engineers (shown in lowercase letters) work with the Prim

35、ary Designated Engineer to interpret requirements and maintain standards. Should you have questions regarding the interpretation of the requirements proposed in this bulletin or any adopted requirements that affect your product, you are encouraged to contact the individual at the office to which you

36、 normally submit your products. The Industry Advisory Group (IAG) Chairman for the subject categories is John Hawley at ULs Northbrook office. The IAG Chairman oversees the significant interpretations made by the Primary Designated Engineer and arbitrates any differences regarding interpretation of UL requirements. I CCN I Off iceiSu bsidiarv I ResDonsible Enaineer I Extension I EDQX, Melville Roland Riegel 22421 I I I I I