ANSI UL 6-2007 UL Standard for Safety Electrical Rigid Metal Conduit C Steel (Fourteenth Edition Reprint with Revisions Through and Including November 14 2014)《电气刚性金属管.钢(提议日期7-13-0.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 6 Electrical Rigid Metal Conduit SteelUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FUR

2、THER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Electrical Rigid Metal Conduit Steel, UL 6 Fourteenth Edition, Dated November 30, 2007 Summary of Topics UL 6 is being revised to incorporate the following requirements in clauses 7.6, 7.7, 7.10, and 7.11: 1. Mar

3、king Limitation on Small Trade Size Elbows and Nipples Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 28, 2014

4、. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, eith

5、er expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages

6、arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users o

7、f the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electr

8、onic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been

9、revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. NOVEMBER 14, 2014 UL 6 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 14, 2014 UL 6 tr2 No Text

10、on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL National Association of Standardization and Certication of the Electrical Sector NMX- J-534-ANCE Second Edition CSA Group CSA C22.2 No. 45.1-07 Second Edition Underwriters Laborator

11、ies Inc. UL 6 Fourteenth Edition Electrical Rigid Metal Conduit Steel November 30, 2007 (Title Page Reprinted: November 14, 2014) ANSI/UL 6-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued

12、 jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at any time. Revisi

13、ons to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions i

14、nto a new edition of the standard bearing the same date of issue as the CSA and UL pages. Copyright 2014 ANCE Rights reserved in favor of ANCE ISBN 978-1-55436-520-3 2007 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission

15、of the publisher. This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include “Proposal for change” in the subject line: Stan

16、dard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at www.shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright

17、2014 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property

18、 of UL. This ANSI/UL Standard for Safety consists of the 14th Edition, including revisions through November 14, 2014. The most recent designation of ANSI/UL 6 as an American National Standard (ANSI) occurred on November 14, 2014. ANSI approval for a standard does not include the Cover Page, Transmit

19、tal Pages, Title Page (front and back), or the Preface. The Department of Defense (DoD) has adopted UL 6 on May 10, 1982. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the Standard may be su

20、bmitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD

21、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .4 1 Scope .6 2 Normative references 6 3 Denitions 6 4 Units of measurement .7 5 Construction 7 5.1 Tube 7 5.2 Finished conduit 8 5.3 Protective coatings .9 5.4 Threading and chamfering 11 5.5 Nipples .13 5.6 Elbows .14 5.7 Threaded

22、couplings 14 6 Test requirements 17 6.1 Tube .17 6.2 Protective coatings 17 7 Markings 25 Annex A (normative) A.1 Normative References 32 Annex B (informative) B.1 Dimensions of ERMC-S .35 Annex C (informative) C.1 Coating tests overview .36 Annex D (informative) D.1 Examination of nished product by

23、 manufacturer 37 Annex E (informative) E.1 Alternative National Markings 38 NOVEMBER 30, 2007 NMX- J-534-ANCE-2007 CSA C22.2 NO. 45.1-07 UL 6 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common ANCE, CSA Group, and UL

24、 standard for electrical rigid metal conduit steel. It is the second edition of NMX-J-534-ANCE, the second edition of CSA C22.2 No. 45.1, and the 14th edition of UL 6. This edition of CSA C22.2 No. 45.1 supersedes the previous edition published in 2004. This edition of UL 6 supersedes the previous e

25、dition published June 30, 2004. This common standard was prepared by the Association of Standardization and Certication (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the conduit manufacturing industry and the Technical Harmonization Subcommittee for Conduit a

26、nd Tubing of the Council of the Harmonization of Electrotechnical Standards for the Nations of the Americas (CANENA) are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican standard was developed

27、 by CT Technical Committee 23 Electrical Accessories from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collaboration of the metal conduit and tubing manufacturers and users. This standard was reviewed by the CSA Subcommittee on Metal Conduit an

28、d Tubing, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institu

29、te as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note

30、 that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This standard uses an IEC format, but is not based on, nor is it to be considered an IEC standard. This standard is published as an equivalent standard for A

31、NCE, CSA Group, and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for exampl

32、e, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. Reasons for differences from IEC The Technical Harmonizati

33、on Subcommittee identied several IEC standards that address electrical conduit and tubing included in the scope of this standard. The IEC standards for electrical conduit and tubing are recognized as being generally system-specic, containing the requirements for the relevant conduits and cables and

34、associated ttings in several discrete IEC standards. NOVEMBER 14, 2014 NMX- J-534-ANCE-2007 CSA C22.2 NO. 45.1-07 UL 6 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL The THSC determined the safe use of electrical conduit and tubing is depe

35、ndent on the design and performance of the conduit and tubing systems with which they are intended to be installed. Signicant investigation is required to assess safety and system compatibility issues that may lead to harmonization of traditional North American electrical conduit and tubing and asso

36、ciated ttings with those presently addressed in the known IEC standards. The THSC agreed such future investigation might be facilitated by completion of harmonization of the North American standards for electrical conduit and tubing and their ttings. Interpretations The interpretation by the standar

37、ds development organization of an identical or equivalent standard shall be based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a

38、revision shall be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. ANCE Effective Date The effective date for ANCE will be announced through the Diario Ocial de la Federacin (Official Gazette) and is indicated on the cover page. CSA

39、 Group Effective Date The effective date for CSA International will be announced through a CSA Informs or CSA Group Certication Notice. UL Effective Date As of November 14, 2014 all products Listed or Recognized by UL must comply with the requirements in this standard. A UL effective date is establi

40、shed by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. NOVEMBER 14, 2014 NMX- J-534-ANCE-2007 CSA C22.2 NO. 45.1-07 UL 6 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Electrical Rigid Metal Conduit Steel 1 S

41、cope 1.1 These requirements cover electrical rigid metal conduit steel (ERMC-S), elbows, couplings, and nipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code, Part 1, NOM-001-SEDE, Standard for Electrical Installations, and NFP

42、A 70, National Electrical Code (see Reference Item No. 1, Annex A). ERMC-S is provided with a zinc, zinc-based, nonmetallic, or other alternate corrosion-resistant exterior coating and an organic or zinc interior coating. It is the users responsibility to determine the appropriate product for their

43、application. 1.2 Non-ferrous and stainless steel conduit are covered by the standards listed in Reference Item No. 2, Annex A. 2 Normative references 2.1 Products covered by this standard shall comply with the reference installation codes and standards as appropriate for the country where the produc

44、t is to be used. When the product is intended for use in more than one country, the product shall comply with the installation codes and standards for all countries where it is intended to be used. A Reference Item No. is provided at the point of use for each reference in this standard. See Annex A

45、for a list of reference publications and the correlating list of reference item numbers to applicable country publications. 2.2 For undated references to standards, such reference shall be considered to refer to the latest edition and all revisions to that edition up to the time when this standard w

46、as approved. For dated references to standards, such reference shall be considered to refer to the dated edition and all revisions published to that edition up to the time the standard was approved. 3 Denitions 3.1 The following denitions apply in this standard. 3.2 Bare threaded tube. A standard le

47、ngth of threaded tube intended to be coated with an alternate corrosion-resistant coating and having a separate coupling. 3.3 Coating(s), alternate corrosion-resistant. A primary coating(s) other than one consisting solely of zinc, which upon evaluation has demonstrated the ability to provide the le

48、vel of corrosion resistance required on the exterior of conduit. See Clause 6.2.4. Note: The coating(s) may include zinc. 3.4 Coating(s), organic. An interior coating(s), other than one consisting solely of zinc, which, upon evaluation, has demonstrated the ability to provide the level of corrosion

49、resistance necessary where the coating is not subject to physical damage. See Clause 6.2.3. Note: The coating(s) may include zinc. 3.5 Coating(s), zinc. A primary coating consisting solely of zinc, which upon evaluation has demonstrated the ability to provide the level of corrosion resistance required on the exterior or interior of conduit as applicable. See Clause 6.2.2. 3.6 Elbow. A manufactured curved section of ERMC-S threaded on each end.