ANSI UL 60065-2015 UL Standard for Safety Audio Video and Similar Electronic Apparatus C Safety Requirements (Eighth Edition).pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60065 Audio, Video and Similar Electronic Apparatus Safety RequirementsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTE

2、D MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Audio, Video and Similar Electronic Apparatus Safety Requirements, UL 60065 Eighth Edition, Dated September 30, 2015 Summary of Topics This new edition of ANSI/UL 60065 is being i

3、ssued to update requirements to those published in IEC 60065, eighth edition. Technical changes to the IEC Standard have been incorporated into the new edition of the UL Standard. National Differences from the Seventh Edition of UL 60065 were reviewed and updated in the new edition. UL 60065 is an a

4、doption of IEC 60065, Audio, video and similar electronic apparatus Safety requirements (Eighth Edition, issued June 2014). Please note that the national difference document incorporates all of the U.S. national differences for UL 60065. The requirements are substantially in accordance with Proposal

5、(s) on this subject dated May 15, 2015 and July 24, 2015. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provide

6、s this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of

7、prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for thi

8、s Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or d

9、eviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. SEPTEMBER 30, 2015 UL 60065 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 30, 2015 UL 60065 tr2 No Text on This PageUL CO

10、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 30, 2015 1 UL 60065 Standard for Audio, Video and Similar Electronic Apparatus Safety Requirements Prior to the seventh edition, the requirements for the products covered by this standard

11、were included in the Standard for Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use, UL 6500, First and Second Editions. UL 60065, seventh edition, was a new edition of UL 6500. The standard number and edition number were changed to correspond with the e

12、quivalent IEC 60065 standard. Seventh Edition June, 2003 Eighth Edition September 30, 2015 This ANSI/UL Standard for Safety consists of the Eighth Edition. The most recent designation of ANSI/UL 60065 as an American National Standard (ANSI) occurred on September 30, 2015. ANSI approval for a standar

13、d does not include the Cover Page, Transmittal Pages, Title Page or Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals sh

14、ould be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships,

15、and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2015 UNDERWRITERS LABORATORIES INC. ANSI/UL 60065-2015UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 30, 2015 UL 60065 2 No Text on

16、 This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 8 NATIONAL DIFFERENCES .9 FOREWORD . 10 INTRODUCTION . 12 1 General .15 1.1 Scope 15 1.2 Normative references 18 2 Terms and denitions 23 2.1 Denitions in alphab

17、etical order .23 2.2 Types of apparatus 25 2.3 Ratings and electrical values 26 2.4 Supply and external connections 28 2.5 Signals, sources, loads .31 2.6 Protection against electric shock, insulations 31 2.7 Components 33 2.8 Miscellaneous .35 3 General requirements 36 3.1 General 36 3.2 Designatio

18、n of classes .37 3.3 Constructions and components not specically covered 37 3.4 Components and subassemblies that comply with IEC 62368-1 UL 62368-1 37 4 General test conditions .37 4.1 Conduct of tests .37 4.2 Normal operating conditions 39 4.3 Fault conditions .43 5 Marking and instructions 46 5.1

19、 General requirements 46 5.2 Identication and supply ratings .47 5.3 TERMINALS 49 5.4 Caution marking .50 5.5 Instructions .51 6 Hazardous radiations .55 6.1 Ionizing radiation 55 6.2 Laser radiation 56 6.3 Light emitting diodes (LEDs) 58 7 Heating under normal operating conditions 59 7.1 General 59

20、 7.2 Heat resistance of insulating material 63 8 Constructional requirements with regard to the protection against electric shock .63 9 Electric shock hazard under normal operating conditions .74 9.1 Testing on the outside .74 9.2 Removal of protective covers .79 10 Insulation requirements 80 10.1 F

21、requencies .80 10.2 Surge test .80 10.3 Humidity treatment .80 SEPTEMBER 30, 2015 UL 60065 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 10.4 Insulation resistance and dielectric strength .81 11 Fault conditions .83 11.1 Electric shock ha

22、zard .83 11.2 Heating .84 12 Mechanical strength .88 12.1 Complete apparatus 88 12.2 Fixing of actuating elements .92 12.3 REMOTE CONTROL devices held in hand 93 12.4 Drawers .93 12.5 Antenna coaxial sockets mounted on the apparatus 93 12.6 Telescoping or rod antennas 94 12.7 Apparatus containing CO

23、IN / BUTTON CELL BATTERIES 95 12.8 Adhesives .97 13 CLEARANCES and CREEPAGE DISTANCES .97 13.1 General .97 13.2 Determination of WORKING VOLTAGE 98 13.3 CLEARANCES .99 13.4 CREEPAGE DISTANCES .106 13.5 PRINTED BOARDS .108 13.6 Jointed insulation .109 13.7 Enclosed and sealed parts .110 14 Components

24、 111 14.1 General 111 14.2 Resistors .112 14.3 Capacitors and RC-units .113 14.4 Inductors and windings 115 14.5 High voltage components and assemblies 120 14.6 Protective devices .123 14.7 Switches .128 14.8 SAFETY INTERLOCKS .133 14.9 Voltage setting devices and the like .133 14.10 Motors 133 14.1

25、1 Batteries 134 14.12 Optocouplers 136 14.13 Surge suppression varistors .137 15 TERMINALS 138 15.1 Plugs and sockets .138 15.2 Provisions for protective earthing 141 15.3 TERMINALS for external exible cords and for permanent connection to the MAINS supply .142 15.4 Devices forming a part of the MAI

26、NS plug 146 16 External exible cords 148 17 Electrical connections and mechanical xings .152 18 Mechanical strength of picture tubes and protection against the effects of implosion .155 18.1 General 155 18.2 Non-intrinsically protected picture tubes 156 19 Stability and mechanical hazards 156 19.1 S

27、tability requirements 156 19.2 Test at 10 to the horizontal 157 19.3 Vertical force test .158 19.4 Horizontal force test .158 19.5 Test of edges and corners .159 19.6 Mechanical strength of glass .159 19.7 Wall or ceiling or equipment rack mounting means 160 SEPTEMBER 30, 2015 UL 60065 4UL COPYRIGHT

28、ED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 20 Resistance to re 162 20.1 Requirements .162 20.2 Electrical components and mechanical parts 162 20.3 FIRE ENCLOSURE .166 Annex A (normative) Additional requirements for apparatus with protection against

29、 splashing water for outdoor use and wet locations A.1 General 190 A.5 Marking and instructions .190 A.10 Insulation requirements .191 A.10.3 Splash and humidity treatment 191 Annex B DU (normative) Apparatus to be connected to the TELECOMMUNICATION NETWORKS Annex C (normative) Band-pass lter for wi

30、de-band noise measurement Annex D DU (normative) Measuring network for TOUCH CURRENTS Annex E (normative) Measurement of CLEARANCES and CREEPAGE DISTANCES Annex F (normative) Table of electrochemical potentials Annex G DU (normative) Flammability test methods Annex H (normative) Insulated winding wi

31、res for use without interleaved insulation H.1 General 211 H.2 Type tests .211 H.2.1 General .211 H.2.2 Dielectric strength 211 H.3 Testing during manufacture .213 Annex I (Void) Annex J (normative) Alternative method for determining minimum CLEARANCES J.1 General 215 J.2 Summary of the procedure fo

32、r determining minimum CLEARANCES 215 J.3 Determination of MAINS transient voltage .216 J.4 Determination of TELECOMMUNICATION NETWORK TRANSIENT VOLTAGE .216 J.5 Determination of REQUIRED WITHSTAND VOLTAGE 217 J.6 Measurement of transient levels 218 SEPTEMBER 30, 2015 UL 60065 5UL COPYRIGHTED MATERIA

33、L NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL J.7 Determination of minimum CLEARANCES .219 Annex K (normative) Impulse test generators Annex L DU (normative) Additional requirements for electronic ash apparatus for photographic purposes L.1 Overview .222 L.2 Ge

34、neral 222 L.4 General test conditions 222 L.5 Marking and instructions .223 L.7 Heating under normal operating conditions .223 L.9 Electric shock hazard under normal operating conditions .223 L.10 Insulation requirements .224 L.11 Fault conditions 224 L.12 Mechanical strength 224 L.14 Components .22

35、4 L.20 Resistance to re 225 Annex M (informative) Examples of requirements for quality control programmes for allowing reduced clearances Annex N (informative) Routine tests N.1 General 227 N.2 Tests during the production process 227 N.2.1 Correct polarity and connection of components or subassembli

36、es 227 N.2.2 Correct values of components .227 N.2.3 Protective earthing connection of screens and metal barriers 228 N.2.4 Correct position of internal wiring .228 N.2.5 Correct t of internal plug connections 228 N.2.6 Safety relevant markings inside the apparatus .228 N.2.7 Correct mounting of mec

37、hanical parts .229 N.3 Tests at the end of the production process .229 N.3.1 General .229 N.3.2 Dielectric strength test 229 N.3.3 Protective earthing connection .230 N.3.4 Safety relevant markings on the outside of the apparatus .230 SEPTEMBER 30, 2015 UL 60065 6UL COPYRIGHTED MATERIAL NOT AUTHORIZ

38、ED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex P Bibliography Annex Q DU (normative) Safety requirements for video apparatus for use in health care facilities Annex R DU (normative) Safety requirements for undercabinet apparatus Annex S DU (normative) Safety requirement

39、s for in-wall mounted apparatus Annex T DU (normative) Safety requirements for apparatus with projection lamps Annex U DU (normative) Safety requirements for permanently connected apparatus Annex V DU (normative) Safety requirements for carts, stands, and similar apparatus for use with specic appara

40、tus covered by this standard V.19 Mechanical stability .256 Annex W DU (informative) A 0,02-ohm shunt for use in the peak inrush-current measurement described in 14.7.6.1 Annex X DU (normative) Manufacturing and production-line tests and verications Annex Y DC (normative) Standards for components SE

41、PTEMBER 30, 2015 UL 60065 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard is based on IEC Publication 60065: Eighth Edition, Audio, video and similar electronic apparatus Safety requirements. IEC publication 60

42、065 is copyrighted by the IEC. The text, gures and tables of IEC Publication 60065, Audio, video and similar electronic apparatus Safety requirements, copyright June 2014, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted

43、material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publicat

44、ion IEC Publication 60065 may be purchased from ANSI, 11 West 42nd Street, New York, New York, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to jud

45、ge its suitability for their particular purpose. SEPTEMBER 30, 2015 UL 60065 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC)

46、Publication IEC 60065, Audio, video and similar electronic apparatus Safety requirements, copyright 2014, are indicated by notations next to the clause, sub-clause, Table, Figure or Annex number. There are four types of National Differences in this Standard as noted below. DU These are National Diff

47、erences which are either (1) based on basic safety principles and requirements, elimination of which would compromise safety for U.S. consumers and users of products, or (2) based on safety practices, where the IEC requirements may be acceptable, but adopting the IEC requirements would require consi

48、derable retesting or redesign on the manufacturers part. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or co

49、rrections. DR These are National Differences based on the national regulatory requirements. National Differences have been incorporated into the body of the standard. If National Differences necessitate the deletion of the IEC 60065 text, the IEC 60065 text has been retained but has been lined-out. Text added as a result of National Differences has been underlined. Text added as the UL Preface and UL Foreword is not underlined. SEPTEMBER 30, 2015 UL 60065 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED