ANSI UL 60730-2-13-2014 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Humidity Sensing Controls (Second Edit.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-13 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing ControlsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD

2、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Con

3、trols, UL 60730-2-13 Second Edition, Dated July 1, 2014 Summary of Topics UL 60730-2-13 is an adoption of the second edition of IEC 60730-2-13. This new edition dated July 1, 2014, was issued to reect the latest approval date as an American National Standard that was proposed March 21, 2014. For fur

4、ther information regarding Summary of Requirements, please visit https:/ It is also being issued to reect the established effective date for UL 60730-2-13. AS OF OCTOBER 19, 2018, THE FIRST EDITION OF UL 60730-2-13A AND THE TWELFTH EDITION OF UL 873 WILL BE WITHDRAWN AND WILL BE REPLACED BY THIS STA

5、NDARD. The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 21, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recor

6、ding, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, c

7、onsequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall UL

8、s liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (inclu

9、ding reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of th

10、e Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. The following table lists the future effective date

11、s with the corresponding reference. JULY 1, 2014 UL 60730-2-13 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference October 19, 2018 Second Edition JULY 1, 2014 UL 60730-2-13 tr2UL COPYRIGHTED MATERIAL NOT AUTHO

12、RIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL July 1, 2014 1 UL 60730-2-13 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls Prior to the second edition of UL 60730-2-13, the requirement

13、s for the products covered by this Standard were included in UL 60730-2-13A. First Edition February, 2002 Second Edition July 1, 2014 This ANSI/UL Standard for Safety consists of the Second Edition dated July 1, 2014. The most recent designation of ANSI/UL 60730-2-13 as an American National Standard

14、 (ANSI) occurred on July 1, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals

15、for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a St

16、andard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 60730-2-13-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER R

17、EPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 1, 2014 UL 60730-2-13 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope and normative referenc

18、es .11 2 Denitions 11 2.2 Denitions of types of control according to purpose 11 3 General requirements 11 4 General notes on tests .11 5 Rating 12 6 Classication 12 7 Information 12 8 Protection against electric shock .12 9 Provision for protective earthing .12 10 Terminals and terminations 12 11 Co

19、nstructional requirements 12 12 Moisture and dust resistance .12 13 Electric strength and insulation resistance .12 14 Heating 13 15 Manufacturing deviation and drift .13 16 Environmental stress 13 17 Endurance .13 17.8 Test of automatic action at accelerated rate .13 17.16 Tests for particular purp

20、ose controls .14 18 Mechanical strength .14 19 Threaded parts and connections 14 20 Creepage distances, clearances and distances through solid insulation .14 21 Resistance to heat, re and tracking 15 22 Resistance to corrosion 15 23 Electromagnetic compatibility (EMC) requirements emission 15 24 Com

21、ponents .15 25 Normal operation .15 26 Electromagnetic compatibility (EMC) requirements immunity .15 27 Abnormal operation .15 28 Guidance on the use of electronic disconnection .15 Figures Figures .16 JULY 1, 2014 UL 60730-2-13 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIS

22、TRIBUTION WITHOUT PERMISSION FROM UL Annexes Annex H (normative) Requirements for electronic controls H.6.18 According to software class 18 H.7 Information 18 H.11 Constructional requirements 18 H.11.12 Controls using software 18 H.23 Electromagnetic compatibility (EMC) requirements emission 19 H.26

23、 Electromagnetic compatibility (EMC) requirements immunity .19 H.26.5 Voltage dips and voltage interruptions in the power supply network 20 H.26.8 Surge immunity test 20 H.26.9 Electrical fast transient/burst test .21 H.26.10 Ring wave test 21 H.26.12 Radio-frequency electromagnetic eld immunity .21

24、 H.26.13 Test of inuence of supply frequency variations .22 H.26.14 Power frequency magnetic eld immunity test 22 H.26.15 Evaluation of compliance .22 H.27 Abnormal operation .22 Annex AA (normative) Number of cycles AA.1 Number of cycles for independently mounted and in-line cord controls 23 AA.2 M

25、inimum number of cycles for independently mounted and in-line cord controls (applicable in Canada and the USA) .23 Annex 13.DVE Manufacturing and Production Tests (normative) JULY 1, 2014 UL 60730-2-13 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSIO

26、N FROM UL JULY 1, 2014 UL 60730-2-13 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard, UL 60730-2-13, Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Partic

27、ular Requirements for Humidity Sensing Controls, is to be used in conjunction with UL 60730-1. The requirements for humidity sensing controls are contained in this part 2 standard and UL 60730-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60730-1. Where a partic

28、ular subclause of UL 60730-1 is not mentioned in UL 60730-2-13, the UL 60730-1 subclause applies. The text, gures and tables of the IEC Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls, 60730-2-13, copyright 2006,

29、 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introd

30、uction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 60730-2-13 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900. Note Although the intended primary application of this Stand

31、ard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, includi

32、ng an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60730-2-13 standard should be submitted to UL. UL effective date The effective date for UL 60730-2-13, second edition, is October 19, 2018. A UL effective date is one established by Under

33、writers Laboratories Inc. and is not part of the ANSI approved standard. JULY 1, 2014 UL 60730-2-13 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotech

34、nical Commission (IEC) Publication 60730-2-13, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls, copyright 2006, are indicated by notations (differences) and are presented in bold text. There are ve types of National Differenc

35、es as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which a

36、re based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical subs

37、tantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE

38、These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: A

39、ddition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or

40、 deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. JULY 1, 2014 UL 60730-2-13 7

41、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-13: Particular Requirements for Humidity Sensing Controls FOREWORD 1) The Internatio

42、nal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic

43、 elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC

44、National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization

45、 (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representati

46、on from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot

47、 be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications.

48、 Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Pub

49、lication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of