ANSI UL 61010-2-033-2014 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-033 Particular Requirements for Hand-Held .pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61010-2-033 (IEC 61010-2-033:2012) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and

2、 Other Meters, for Domestic and Professional Use, Capable of Measuring Mains VoltageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL

3、Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains Voltage, UL 61010-2-033 (IEC 61010-2-033:2012) First Ed

4、ition, Dated August 8, 2014 Summary of Topics Adoption of IEC 61010-2-033, Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring

5、 Mains Voltage (rst edition issued April 2012) as a new IEC-based UL standard, UL 61010-2-033 (IEC 61010-2- 033:2012), with no National Differences. The new requirements are substantially in accordance with Proposal(s) on this subject dated June 6, 2014. All rights reserved. No part of this publicat

6、ion may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limi

7、ted to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to u

8、se this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for

9、Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system

10、. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date a

11、re located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012)

12、 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL August 8, 2014 1 UL 61010-2-033 (IEC 61010-2-033:2012) Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-033

13、: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains Voltage First Edition August 8, 2014 This ANSI/UL Standard for Safety consists of the First Edition dated August 8, 2014. The most recent designation of ANSI/UL 61010-2

14、-033 (IEC 61010-2-033:2012) as an American National Standard (ANSI) occurred on August 8, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. Comments or proposals for revisions on any part of the Standard may be

15、submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs S

16、tandards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 61010-2-033-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION F

17、ROM UL AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 FOREWORD 7 INTRODUCTION . 10 1 Scope and object .11 2 Normative references .12 3 Terms and d

18、enitions 12 3.1 Equipment and states of equipment .12 3.5 Safety terms 13 4 Tests .13 5 Marking and documentation .14 5.2 Warning markings .16 6 Protection against electric shock .17 6.6 Connections to external circuits .19 6.9 Constructional requirements for protection against electric shock 20 7 P

19、rotection against mechanical hazards .20 8 Resistance to mechanical stresses .20 9 Protection against the spread of re 20 10 Equipment temperature limits and resistance to heat 20 11 Protection against HAZARDS from uids 20 12 Protection against radiation, including laser sources, and against sonic a

20、nd ultrasonic pressure .21 13 Protection against liberated gases and substances, explosion and implosion .21 14 Components and subassemblies .21 14.101 Circuits or components used as TRANSIENT OVERVOLTAGE limiting devices in measuring circuits used to measure MAINS .21 14.102 Probe assemblies and ac

21、cessories .22 15 Protection by interlocks 22 16 HAZARDS resulting from application .22 16.101 Over-range indication .22 17 RISK assessment 22 101 Measuring circuits .23 101.1 General 23 101.2 Current measuring circuits 23 101.3 Protection against mismatches of inputs and ranges .24 101.4 Functional

22、integrity 27 Annexes Annex K (normative) Insulation requirements not covered by 6.7 K.3 Insulation in circuits not addressed in 6.7, Clause K.1 or Clause K.2 .29 K.3 Insulation for circuits not addressed in 6.7, K.1, K.2 or K.101 29 K.3.1 General 29 K.101 Insulation requirements for measuring circui

23、ts of MEASUREMENT CATEGORIES IIIandIV .29 K.101.1 General 29 AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL K.101.2 CLEARANCES 30 K.101.3 CREEPAGE DISTANCES .30 K.101.4 Solid insulation

24、31 Annex L (informative) Index of dened terms Annex AA (normative) Measurement categories AA.1 General .36 AA.2 MEASUREMENT CATEGORIES .36 AA.2.1 MEASUREMENT CATEGORY II36 AA.2.2 MEASUREMENT CATEGORY III .36 AA.2.3 MEASUREMENT CATEGORY IV.37 AA.2.4 Measuring circuits without a RATED MEASUREMENT CATE

25、GORY 37 Annex BB (informative) Hazards pertaining to measurements performed in certain environments BB.1 General .39 BB.2 MAINS CIRCUITS .39 BB.2.1 General .39 BB.2.2 Electric shock 39 BB.2.3 Arc ash 39 BB.3 Thermal burns 39 BB.4 Telecommunications networks 40 BB.5 Current measurements in inductive

26、circuits 40 BB.6 Battery-driven circuits .40 BB.7 Measurements at higher frequencies 40 Bibliography AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 8, 2014 UL 61010-2-033 (IEC 610

27、10-2-033:2012) 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication 61010-2-033: rst edition, Safety Requirements for Electrical Equipment for Measurement, Control, and La

28、boratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains Voltage. IEC publication 61010-2-033 is copyrighted by the IEC. This UL Standard 61010-2-033 Safety Requirements for Electrical Equipment for Mea

29、surement, Control, and Laboratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains Voltage, is to be used in conjunction with the third edition of UL 61010-1. The requirements for control equipment are c

30、ontained in this Part 2 Standard and UL 61010-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 61010-1. Where a particular subclause of UL 61010-1 is not mentioned in UL 61010-2-033, the UL 61010-1 subclause applies. The text, gures and tables of IEC Publication Sa

31、fety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains Voltage, IEC 61010-2-033, copyright April 2012, are used in this Stand

32、ard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part o

33、f the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 61010-2-201 may be purchased from ANSI, 11 West 42nd Street, New York, New York, 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope

34、, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. UL Effective Date The effective date for UL 61010-2-033 (IEC 61010-2-033:2012), First edition is August 8, 2014. A UL effective date is one established by

35、Underwriters Laboratories Inc. and is not part of the ANSI approved standard. AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION SAFETY REQUIREMENTS

36、 FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide

37、organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activitie

38、s, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt wi

39、th may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by ag

40、reement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IE

41、C Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are us

42、ed or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the c

43、orresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible fo

44、r any services carried out by independent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and

45、 IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) At

46、tention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.

47、 IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61010-2-33 has been prepared by IEC technical committee 66: Safety of measuring, control and laboratory equipment. AUGUST 8, 2014 UL 61010-2-033 (IEC 61010-2-033:2012) 7UL COPYRIGHTED MATERIA

48、L NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL The text of this standard is based on the following documents: FDIS Report on voting 66/461/FDIS 66/464/RVD Full information on the voting for the approval of this standard can be found in the report on voting indic

49、ated in the above table. This Part 2-033 is to be used in conjunction with third edition of IEC 61010-1 (2010), on the basis of which It was established. Consideration may be given to future editions of, or amendments to, IEC 61010-1. This Part 2-033 supplements or modies the corresponding clauses in IEC 61010-1 so as to convert that publication into the IEC standard: Particular requirements for HAND-HELD MULTIMETERS and other METERS, for domestic and professional use, capable of measuring MAINS voltage.