ANSI UL 61010-2-201-2018 UL Standard for Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use C Part 2-201 Particular Requirements for Control Eq.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61010-2-201 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment STANDARD FOR SAFETYUL COPYRIGH

2、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laborat

3、ory Use Part 2-201: Particular Requirements for Control Equipment, UL 61010-2-201 Second Edition, Dated May 14, 2018 Summary of Topics This new edition of ANSI/UL 61010-2-201 is an Adoption of IEC 61010-2-201:2017, Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory

4、Use Part 2-201: Particular requirements for control equipment Second edition issued by the IEC March 2017. Please note that the National Difference document incorporates all of the U.S. national differences for UL 61010-2-201. The requirements are substantially in accordance with Proposal(s) on this

5、 subject dated January 26, 2018 and March 30, 2018. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this

6、 Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots,

7、 lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Stan

8、dard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviati

9、on introduced while purchaser is storing an electronic Standard on the purchasers computer system. MAY 14, 2018 UL 61010-2-201 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 14, 2018 UL 61010-2-201 tr2 No Text on This PageUL COPYRIGH

10、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 14, 2018 1 UL 61010-2-201 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment First Edition

11、 January, 2014 Second Edition May 14, 2018 This ANSI/UL Standard for Safety consists of the Second Edition. The most recent designation of ANSI/UL 61010-2-201 as an American National Standard (ANSI) occurred on May 14, 2018. ANSI approval for a standard does not include the Cover Page, Transmittal P

12、ages, Title Page, or Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs

13、 On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall rem

14、ain the sole and exclusive property of UL. COPYRIGHT 2018 UNDERWRITERS LABORATORIES INC. ANSI/UL 61010-2-201-2018UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 14, 2018 UL 61010-2-201 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AU

15、THORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 NATIONAL DIFFERENCES . 7 FOREWORD 8 INTRODUCTION . 11 1 Scope and object 12 2 Normative references .14 3 Terms and denitions 15 4 Tests .18 4.1 General 18 5 Marking and documentation .19 6 Protection agai

16、nst electric shock .21 6.10 Connection to the MAINS supply source and connections between parts of equipment .36 6.11 Disconnection from supply source 36 7 Protection against mechanical HAZARDS 36 7.2 Sharp edges 37 7.7 Expelled parts 38 8 Resistance to mechanical stresses .38 8.1 General 38 8.3 Dro

17、p test .39 9 Protection against the spread of re 39 9.2 Eliminating or reducing the sources of ignition within the equipment .39 10 Equipment temperature limits and resistance to heat 41 10.1 Surface temperature limits for protection against burns .41 10.3 Other temperature measurements 42 11 Protec

18、tion against HAZARDS from uids .47 11.6 Specially protected equipment .47 12 Protection against radiation, including laser sources, and against sonic and ultrasonic pressure .48 13 Protection against liberated gases and substances, explosion and implosion .48 13.1 Poisonous and injurious gases and s

19、ubstances 48 14 Components and subassemblies .48 14.101 Components bridging insulation 48 14.102 Switching devices 49 15 Protection by interlocks 49 16 HAZARDS resulting from application .49 17 RISK assessment 49 MAY 14, 2018 UL 61010-2-201 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU

20、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annexes Annex E (informative) Guideline for reduction of POLLUTION DEGREES Annex F (normative) ROUTINE TESTS F.2 Protective earth 53 F.3.1 General 53 F.4 Floating circuits 53 F.101 Supply circuits other than MAINS and oating circuits 53 Annex L (infor

21、mative) Index of dened terms Annex AA (informative) General approach to safety for control equipment AA.1 Personnel 56 AA.1.1 General .56 AA.1.2 OPERATOR 56 AA.1.3 SERVICE PERSONNEL .57 AA.2 Operating access areas .57 AA.3 Service access areas .57 AA.4 Equipment types 57 AA.4.1 General .57 AA.4.2 OP

22、EN EQUIPMENT 58 AA.4.3 ENCLOSED EQUIPMENT 58 Annex BB (informative) System drawing of isolation boundaries BB.1 General .59 BB.2 Installation environment of OPEN control equipment 59 BB.3 Control equipment electrical safety drawing 61 BB.4 Applying the standard to the control equipment electrical sa

23、fety drawing 63 BB.5 Conclusion .69 Annex CC (informative) Historical techniques for secondary circuits CC.1 Secondary circuits background .70 CC.2 Secondary circuits without RISK of electrical shock 70 CC.2.1 General .70 CC.2.2 Secondary circuits which do not pose a RISK of electrical shock 71 CC.3

24、 Secondary circuits without RISK of spread of re 72 CC.3.1 General .72 CC.3.2 Secondary circuits which do not pose a RISK of spread of re 73 Annex DD (normative) Flammability test for magnesium alloy re ENCLOSUREs or ame barriers (see 9.3.2) MAY 14, 2018 UL 61010-2-201 4UL COPYRIGHTED MATERIAL NOT A

25、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL DD.1 General .75 DD.2 Samples .75 DD.3 Mounting of samples 75 DD.4 Test ame .75 DD.5 Test procedure .75 Annex EE (informative) Information/documentation and correlation to its uses Annex FF (informative) Measurement of CLE

26、ARANCES and CREEPAGE DISTANCES Annex 101.DVA (informative) Description of major changes from the First edition to the Second edition of IEC 61010-2-201 Bibliography MAY 14, 2018 UL 61010-2-201 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL

27、 PREFACE This UL Standard is based on IEC Publication 61010-2-201: Second edition Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment. IEC publication 61010-2-201 is copyrighted by the IEC. This UL Standa

28、rd 61010-2-201 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment, is to be used in conjunction with the third edition of UL 61010-1. The requirements for control equipment are contained in

29、this Part 2 Standard and UL 61010-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 61010-1. Where a particular subclause of UL 61010-1 is not mentioned in UL 61010-2-201, the UL 61010-1 subclause applies. These materials are subject to copyright claims of IEC and U

30、L. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirem

31、ents for Control Equipment Standard should be submitted to UL. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. MAY 14

32、, 2018 UL 61010-2-201 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of International Electrotechnical Commission (IEC) Publication 61010-2-201, Safety Requirements for Electrical Equ

33、ipment for Measurement, Control, and Laboratory Use Part 2-201: Particular Requirements for Control Equipment copyright March 2017 are indicated by notations (differences) and are presented in bold text. The national difference type is included in the body. There are ve types of National Differences

34、 as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are

35、 based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are National Differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substa

36、ntiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE Th

37、ese are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Add

38、ition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or d

39、eletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. MAY 14, 2018 UL 61010-2-201 7U

40、L COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 2-201: Particular requirements for control equipment FORE

41、WORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the ele

42、ctrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technica

43、l committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizat

44、ion for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical com

45、mittee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications

46、is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and

47、 regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and,

48、 in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or age

49、nts including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indisp