ANSI UL 61215-2-2017 UL Standard for Safety Terrestrial photovoltaic (PV) modules C Design qualification and type approval C Part 2 Test procedures (First Edition).pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 61215-2 Terrestrial photovoltaic (PV) modules Design qualication and type approval Part 2: Test procedures STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION

2、OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Terrestrial photovoltaic (PV) modules Design qualication and type approval Part 2: Test procedures, UL 61215-2 First Edition

3、, Dated February 28, 2017 Summary of Topics UL 61215-2 is an adoption of IEC 61215-2, Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 2: Test procedures (First Edition, issued March 2016). Please note that there are no National Differences. The requirements are substa

4、ntially in accordance with Proposal(s) on this subject dated November 4, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permiss

5、ion of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damage

6、s, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed t

7、he price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resultin

8、g from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. FEBRUARY 28, 2017 UL 61215-2 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28, 2017 UL 61215-2 tr2 No

9、 Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL February 28, 2017 1 UL 61215-2 Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 2: Test procedures First Edition February 28, 2017 This ANSI/UL

10、Standard for Safety consists of the First Edition dated February 28, 2017. The most recent designation of ANSI/UL 61215-2 as an American National Standard (ANSI) occurred on February 28, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or Preface. Th

11、e National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards

12、 Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive prope

13、rty of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 61215-2-2017UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 28, 2017 UL 61215-2 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION O

14、R DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 4 FOREWORD 5 INTRODUCTION . 7 1 Scope and object .8 2 Normative references 8 3 Terms and denitions 9 4 Test procedures .11 4.1 Visual inspection (MQT 01) .11 4.2 Maximum power determination (MQT 02) 11 4.3 Insulation test (MQT 03) 12 4.4 Mea

15、surement of temperature coefficients (MQT 04) .14 4.5 Measurement of nominal module operating temperature (NMOT) (MQT 05) 14 4.6 Performance at STC and NMOT (MQT 06) .15 4.7 Performance at low irradiance (MQT 07) .17 4.8 Outdoor exposure test (MQT 08) 18 4.9 Hot-spot endurance test (MQT 09) 19 4.10

16、UV preconditioning test (MQT 10) 33 4.11 Thermal cycling test (MQT 11) .34 4.12 Humidity-freeze test (MQT 12) .36 4.13 Damp heat test (MQT 13) .38 4.14 Robustness of terminations (MQT 14) 39 4.15 Wet leakage current test (MQT 15) .43 4.16 Static mechanical load test (MQT 16) .45 4.17 Hail test (MQT

17、17) 47 4.18 Bypass diode testing (MQT 18) 50 4.19 Stabilization (MQT 19) 54 FEBRUARY 28, 2017 UL 61215-2 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This UL Standard is based on IEC Publication IEC 61215-2: First edition Terrest

18、rial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 2: Test procedures. IEC publication IEC 61215-2 is copyrighted by the IEC. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrie

19、val system, without the prior written permission of UL. All requests pertaining to the Terrestrial Photovoltaic (PV) Modules Design Qualication and Type Approval Part 2: Test procedures, 61215-2, Standard should be submitted to UL. Note Although the intended primary application of this Standard is s

20、tated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. FEBRUARY 28, 2017 UL 61215-2 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL

21、INTERNATIONAL ELECTROTECHNICAL COMMISSION TERRESTRIAL PHOTOVOLTAIC (PV) MODULES DESIGN QUALIFICATION AND TYPE APPROVAL Part 2: Test procedures FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical comm

22、ittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Re

23、ports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and n

24、ongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements o

25、f IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are

26、accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote intern

27、ational uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in th

28、e latter. 5) IEC itself does not provide any attestation of conformity. Independent certication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certication bodies. 6) All users sho

29、uld ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other dam

30、age of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of

31、 the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent righ

32、ts. International Standard IEC 61215-2 has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. This rst edition of IEC 61215-2 cancels and replaces the second edition of IEC 61215 (2005) and parts of the second edition of 61646 (2008) and constitutes a technical revision.

33、 FEBRUARY 28, 2017 UL 61215-2 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL The main technical changes with regard to these previous editions are as follows: This standard includes the testing procedures formally Clause 10 of the previous

34、 edition. Revisions were made to subclauses NMOT (replaces NOCT MQT 05), performance measurements (MQT 06), robustness of terminations (MQT 14) and stabilization (MQT 19). The text of this standard is based on the following documents: FDIS Report on voting 82/1048/FDIS 82/1076/RVD Full information o

35、n the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 61215 series, published under the general title Terrestrial photovoltaic (PV) modules Design qualication and type approval, can be found on the IEC website

36、. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under http:/webstore.iec.ch in the data related to the specic publicatio

37、n. At this date, the publication will be reconrmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users s

38、hould therefore print this document using a colour printer. FEBRUARY 28, 2017 UL 61215-2 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION Whereas Part 1 of this standard series describes requirements (both in general and specic

39、with respect to device technology), the sub-parts of Part 1 dene technology variations and Part 2 denes a set of test procedures necessary for design qualication and type approval. The test procedures described in Part 2 are valid for all device technologies. FEBRUARY 28, 2017 UL 61215-2 7UL COPYRIG

40、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL TERRESTRIAL PHOTOVOLTAIC (PV) MODULES DESIGN QUALIFICATION AND TYPE APPROVAL Part 2: Test procedures 1 Scope and object This International Standard series lays down IEC requirements for the design qualic

41、ation and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as dened in IEC 60721-2-1. This part of IEC 61215 is intended to apply to all terrestrial at plate module materials such as crystalline silicon module types as well as thin-lm m

42、odules. This standard does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. The objecti

43、ve of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in general open-air climates. The actual lifetime expectancy

44、 of modules so qualied will depend on their design, their environment and the conditions under which they are operated. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, on

45、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050, International Electrotechnical Vocabulary (available at http:/www.electropedia.org) IEC 60068-1, Environmental testing Part 1: General and guidance IEC 6

46、0068-2-21, Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices IEC 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC 60721-2-1, Classication of environmental conditions Part 2-1: Environmental conditions appea

47、ring in nature Temperature and humidity IEC 60891, Photovoltaic devices Procedures for temperature and irradiance corrections to measured I-V characteristics IEC 60904-1, Photovoltaic devices Part 1: Measurements of photovoltaic current-voltage characteristics FEBRUARY 28, 2017 UL 61215-2 8UL COPYRI

48、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL IEC 60904-2, Photovoltaic devices Part 2: Requirements for photovoltaic reference devices IEC 60904-3, Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices

49、 with reference spectral irradiance data IEC 60904-7, Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices IEC 60904-7:1998, Photovoltaic devices Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device IEC 60904-8, Photovoltaic devices Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device IEC 60904-9, Ph