ANSI UL 62133-2017 UL Standard for Safety Secondary Cells And Batteries Containing Alkaline Or Other Non-Acid Electrolytes C Safety Requirements For Portable Sealed Secondary Cells.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62133 Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in P

2、ortable Applications STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Secondary Cells and

3、Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications, UL 62133 Second Edition, Dated September 5, 2017 Summary of Topics The second edition of UL 62133 reects the appro

4、val date as an American National Standard and is harmonized with the Second Edition and Corrigendum 1 of the Standard for Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Us

5、e in Portable Applications, IEC 62133. Please note that the National Difference document incorporates all of the U.S. national differences for UL 62133. The new requirements are substantially in accordance with Proposal(s) on this subject dated October 7, 2016 and February 3, 2017. All rights reserv

6、ed. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or imp

7、lied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the

8、use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic ve

9、rsions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on th

10、e purchasers computer system. SEPTEMBER 5, 2017 UL 62133 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 5, 2017 UL 62133 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI

11、THOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 62133:17 Second Edition (IEC 62133:2012, MOD) Underwriters Laboratories Inc. UL 62133 Second Edition Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for

12、Batteries Made From Them, for Use in Portable Applications September 5, 2017 This national standard is based on publication IEC 62133, Second Edition (2012), including Corrigendum 1:2013. ANSI/UL 62133-2017 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI

13、THOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at anytime.

14、 Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-4883-0747-8 20

15、17 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review within ve years from the date of publication, and suggestions for its improvement will be referred to the appropria

16、te committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. T

17、o purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard sh

18、ould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Second Edition. The most recent designation of ANSI/UL 62133 as an American Natio

19、nal Standard (ANSI) occurred on September 5, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or

20、proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. To purchase UL Standards, visit ULs Standards Sales Site at http:/ HowToOrder.aspx

21、 or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 5 NATIONAL DIFFERENCES . 7 FOREWORD 8 1 Scope 11 2 Normative references .11 3 Terms and denitions 12 4 Parameter measurement tolerances 13 5 G

22、eneral SAFETY considerations .13 5.1 General 13 5.2 Insulation and wiring .14 5.3 VENTING .14 5.4 Temperature/voltage/current management 15 5.5 Terminal contacts .15 5.6 Assembly of cells into batteries .15 5.7 Quality plan .16 6 Type test conditions 16 7 Specic requirements and tests (nickel system

23、s) 17 7.1 Charging procedure for test purposes 17 7.2 INTENDED USE .18 7.3 REASONABLY FORESEEABLE MISUSE 20 8 Specic requirements and tests (lithium systems) 24 8.1 Charging procedures for test purposes .24 8.2 INTENDED USE .25 8.3 REASONABLY FORESEEABLE MISUSE 26 9 Information for SAFETY .32 10 Mar

24、king 33 10.1 Cell marking .33 10.2 Battery marking 33 10.3 Other information .34 11 Packaging .34 Annex A (normative) Charging range of secondary lithium ion cells for safe use A.1 General .35 A.2 SAFETY of lithium-ion SECONDARY BATTERY 35 A.3 Consideration on charging voltage .35 A.3.1 General 35 A

25、.3.2 UPPER LIMIT CHARGING VOLTAGE 35 A.4 Consideration of temperature and charging current .37 A.4.1 General 37 A.4.2 Recommended temperature range .38 A.4.3 High temperature range 39 A.4.4 Low temperature range .40 A.4.5 Scope of the application of charging current 41 A.5 Sample preparation 41 A.5.

26、1 General 41 SEPTEMBER 5, 2017 CAN/CSA-C22.2 NO. 62133:17 UL 62133 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL A.5.2 Insertion procedure for nickel particle to generate internal short .41 A.5.3 Disassembly of charged cell 41 A.5.4 Shape

27、 of nickel particle 41 A.5.5 Insertion of nickel particle to cylindrical cell .42 A.5.6 Insertion of nickel particle to prismatic cell 46 Annex B (informative) Recommendations to equipment manufacturers and battery assemblers Annex C (informative) Recommendations to the end-users Bibliography SEPTEM

28、BER 5, 2017 CAN/CSA-C22.2 NO. 62133:17 UL 62133 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized CSA Group and UL standard for Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Sa

29、fety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications. It is the second edition of CAN/CSA-C22.2 No. 62133, and the second edition of UL 62133. This edition of CAN/CSA-C22.2 No. 62133 supersedes the previous edition published Novemb

30、er 2013 as CAN/CSA-E62133 (adopted IEC 62133:2012). This edition of UL 62133 supersedes the previous edition published on January 9, 2015. This harmonized standard is based on IEC Publication 62133: second edition Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safet

31、y Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications issued 122012, as revised by IEC Corrigendum 1 issued 062013. IEC publication 62133 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters La

32、boratories Inc. (UL). The efforts and support of the International Harmonization Committee on Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications a

33、re gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Batteries and Battery Systems, under the jurisdiction of the CSA Technical Committee on General Requiremen

34、ts, CE Code, Part II and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has been approv

35、ed by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this stan

36、dard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of Harmonization This standard adopts the IEC text with national differences. This standard is published as an identical s

37、tandard for CSA Group and UL. An identical standard is a standard that is exactly the same in technical content except for national differences resulting from conicts in codes and governmental regulations and basic safety principles and requirements. Presentation is word for word except for editoria

38、l changes. SEPTEMBER 5, 2017 CAN/CSA-C22.2 NO. 62133:17 UL 62133 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL All national differences from the IEC text are included in the CSA Group and UL versions of the standard. While the technical c

39、ontent is the same in each organizations version, the format and presentation may differ. Reasons for Differences From IEC National differences from the IEC are being added in order to address safety and regulatory situations present in the US and Canada. Interpretations The interpretation by the st

40、andards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a r

41、evision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication 62133, Secondary Cells and Batteries Containing Alka

42、line or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications, copyright 2012, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part

43、 of the requirements of this standard but is included for information purposes only. For UL, the text, gures and tables of IEC publication 62133, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batterie

44、s Made From Them, for Use in Portable Applications, copyright 2012 are used in this standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproducti

45、on of any portion of the IEC material. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. Copies of IEC Publication 62133 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, New York, 10036, (212) 642-4900. SEPTEMBER 5

46、, 2017 CAN/CSA-C22.2 NO. 62133:17 UL 62133 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES In the CSA Group and UL publications of this standard, National Differences from the text of International Electrotechnical Comm

47、ission (IEC) Publication 62133, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications, copyright 2012, are indicated by notations (differences) and a

48、re presented in bold text. The national difference type is included in the body. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Differences. D

49、R These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are National Differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substantiation (for the IEC or national require