ANSI UL 62841-3-1-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 3-1 Particular Requirements .pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 62841-3-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws STANDARD FOR SAFETYUL

2、COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Electric Motor-Operated Hand-Held Tools, Transportable Tools An

3、d Lawn And Garden Machinery Part 3-1: Particular Requirements For Transportable Table Saws, UL 62841-3-1 First Edition, Dated August 29, 2016 Summary of Topics Adoption Of The First Edition Of IEC 62841-3-1, Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garde

4、n Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws, As The First Edition Of UL 62841-3-1 This standard is an adoption of IEC 62841-3-1, Edition 1, published by the IEC June 2014. Please note that the National Difference document incorporates all of the U.S. national di

5、fferences for UL 62841-3-1. The new requirements are substantially in accordance with Proposal(s) on this subject dated February 19, 2016 and August 29, 2016 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, ele

6、ctronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL b

7、e liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibili

8、ty of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liabi

9、lity, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. AUGUST 29, 2016 UL 62841-3-1 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION

10、 OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 29, 2016 UL 62841-3-1 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 62841-3-1:16 First Edition (IEC 62841-3-1:2014, MOD) Underwriters La

11、boratories Inc. UL 62841-3-1 First Edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws August 29, 2016 This national standard is based on publication IEC 62841-3-1, First Edition (201

12、4). ANSI/UL 62841-3-1-2016 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories In

13、c. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this

14、 standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-4883-0676-1 2016 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to r

15、eview ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (nu

16、mber); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2016 Underwriters Labora

17、tories Inc. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. This ANSI/UL Standard for Safety consists of the First Edit

18、ion. The most recent designation of ANSI/UL 62841-3-1 as an American National Standard (ANSI) occurred on August 29, 2016. The ANSI approval for this standard does not include the Cover Page, Transmittal Pages, Title Page, Preface Page, National Difference Page or IEC Foreword. Comments or proposals

19、 for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL CO

20、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope 11 2 Normative references .11 3 Terms and denitions 12 4 General requirements 15 5 General conditions for the tests 15 6 Radiation, tox

21、icity and similar hazards 15 7 Classication 16 8 Marking and instructions 16 9 Protection against access to live parts 23 10 Starting 23 11 Input and current .24 12 Heating 24 13 Resistance to heat and re 24 14 Moisture resistance .24 15 Resistance to rusting 24 16 Overload protection of transformer

22、s and associated circuits 24 17 Endurance .24 18 Abnormal operation .24 19 Mechanical hazards .25 19.101 Guarding above the table .26 19.102 Guarding below the table .30 19.103 Riving knife 30 19.104 Saw blade guard and anti-kickback device system requirements .32 19.105 Run-down time 34 20 Mechanic

23、al strength .34 21 Construction .36 21.101 Construction to facilitate cutting tool installations .37 21.102 Push stick .39 21.103 Saw blade alignment .40 21.104 Table top .41 21.105 Rip fence and cross-cutting fence 43 21.106 Kickback hazard reducing devices .45 22 Internal wiring 48 23 Components .

24、48 24 Supply connection and external exible cords 48 25 Terminals for external conductors .48 26 Provision for earthing 48 27 Screws and connections .48 28 Creepage distances, clearances and distances through insulation 49 AUGUST 29, 2016 CAN/CSA-C22.2 NO. 62841-3-1:16 UL 62841-3-1 3UL COPYRIGHTED M

25、ATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annexes Annex I (informative) Measurement of noise and vibration emissions I.2 Noise test code (grade 2) 65 I.2.4 Installation and mounting conditions of the power tools during noise tests .65 I.2.5 Operating

26、conditions 65 I.3 Vibration .65 Annex K (normative) Battery tools and battery packs Bibliography AUGUST 29, 2016 CAN/CSA-C22.2 NO. 62841-3-1:16 UL 62841-3-1 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized CSA

27、Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws. It is the First edition of CAN/CSA-C22.2 No. 62841-3-1 and the First edition of UL 62841-3-1. This harmonized st

28、andard is based on IEC Publication 62841-3-1: First edition, Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws issued June 2014. IEC publication 62841-3-1 is copyrighted by the IEC. This ha

29、rmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery UL are

30、gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on C

31、onsumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has

32、been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application o

33、f this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. This CAN/CSA-C22.2 No. 62841-3-1, Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn

34、And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws is to be used in conjunction with the First edition of CAN/CSA-C22.2 No. 62841-1. The requirements for transportable table saws are contained in this Part 3 Standard and CAN/CSA-C22.2 No. 62841-1. Requirements

35、 of this Part 3 Standard, where stated, amend the requirements of CAN/CSA-C22.2 No. 62841-1. Where a particular subclause of CAN/CSA-C22.2 No. 62841-1 is not mentioned in CAN/CSA-C22.2 No. 62841-3-1, the CAN/CSA-C22.2 No. 62841-1 subclause applies. This UL 62841-3-1, Standard for Safety for Electric

36、 Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws, is to be used in conjunction with the First edition of UL 62841-1. The requirements for AUGUST 29, 2016 CAN/CSA-C22.2 NO. 62841-3-1:16 UL 62841-3-

37、1 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL transportable table saws are contained in this Part 3 Standard and UL 62841-1. Requirements of this Part 3 Standard, where stated, amend the requirements of UL 62841-1. Where a particular su

38、bclause of UL 62841-1 is not mentioned in UL 62841-3-1, the UL 62841-1 subclause applies. Level of harmonization This standard adopts the IEC text with national differences. This standard is published as an equivalent standard for CSA Group and UL. An equivalent standard is a standard that is substa

39、ntially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrast

40、ructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. All national differences from the IEC text are included in the CSA Group and UL versions of the standard. While the technical content

41、 is the same in each organizations version, the format and presentation may differ. Reasons for Differences From IEC National Differences from the IEC are being added in order to address safety and regulatory situations present in the US and Canada. Interpretations The interpretation by the standard

42、s development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revisio

43、n is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication IEC 62841-3-1 Electric Motor-Operated Hand-Held Tools, Tra

44、nsportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws, copyright 2014, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part of the requirements of this standard but i

45、s included for information purposes only. For UL, the text, gures and tables of IEC publication IEC 62841-3-1, Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws, copyright 2014 are used in

46、this standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword is not a part of the re

47、quirements of this standard but is included for information purposes only. Copies of IEC Publication IEC 62841-3-1 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, New York, 10036, (212) 642- 4900. AUGUST 29, 2016 CAN/CSA-C22.2 NO. 62841-3-1:16 UL 62841-3-1 6UL COPYRIGHTED MATER

48、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of the International Electrotechnical Commission (IEC) publication 62841-3-1 (Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garde

49、n Machinery Safety Part 3-1: Particular Requirements For Transportable Table Saws) copyright 2014 are indicated by notations (differences) and are presented in bold text. The national difference type is included in the body. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these Nat