1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 636 Holdup Alarm Units and SystemsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER
2、 REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Holdup Alarm Units and Systems, UL 636 Tenth Edition, Dated November 26, 1996 Summary of Topics Revision pages are being issued to reect the recent reaffirmation of UL 636 as an American National Standard. Text that
3、has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the ch
4、anged requirement becomes effective. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is
5、 without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings,
6、loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardles
7、s of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced w
8、hile purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the af
9、fected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JANUARY 31, 2013 UL 636 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION W
10、ITHOUT PERMISSION FROM UL JANUARY 31, 2013 UL 636 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 26, 1996 (Title Page Reprinted: January 31, 2013) 1 UL 636 Standard for Holdup Alarm Units and Systems First E
11、dition July, 1933 Second Edition June, 1945 Third Edition November, 1952 Fourth Edition February, 1958 Fifth Edition September, 1972 Sixth Edition July, 1973 Seventh Edition August, 1978 Eighth Edition July, 1980 Ninth Edition June, 1987 Tenth Edition November 26, 1996 This ANSI/UL Standard for Safe
12、ty consists of the Tenth edition including revisions through January 31, 2013. The most recent designation of ANSI/UL 636 as a Reaffirmed American National Standard (ANS) occurred on January 31, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or eff
13、ective date information. The Department of Defense (DoD) has adopted UL 636 on July 30, 1987. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. P
14、roposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, o
15、wnerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2013 UNDERWRITERS LABORATORIES INC. ANSI/UL 636-2008 (R2013)UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 3, 2008 HOLDUP
16、ALARM UNITS AND SYSTEMS - UL 636 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .7 2 General 7 2.1 Components .7 2.2 Units of measurement .8 2.3 Undated references .8 2.4 Terminology .8 3
17、Glossary .8 INSTRUCTIONS AND DRAWINGS 4 General 9 CONSTRUCTION ASSEMBLY 5 General .10 6 Protection of Service Personnel .10 7 Enclosures 10 7.1 General 10 7.2 Openings .11 7.3 Cast Metal 16 7.4 Sheet Metal .16A 7.5 Nonmetallic 16A 7.6 Doors, covers, and guards 19 7.7 Screens and expanded metal .19 8
18、 Electric Shock .20 9 Corrosion Protection .20 FIELD WIRING CONNECTIONS 10 General 20A 10.1 General 20A 10.2 Field wiring compartment 21 10.3 Terminals general application 21 10.4 Terminals qualied application .21 10.5 Leads .22 10.6 Cords and plugs .23 10.7 Polarity identication 23 11 Grounding .24
19、 INTERNAL WIRING 12 General 24 13 Separation of Circuits .25 14 Bonding for Grounding 25 OCTOBER 3, 2008 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL COMPONENTS ELECTRICAL 15 General 27 15.1 Mounti
20、ng of components 27 15.2 Insulating materials .27 15.3 Current-carrying parts .27 15.4 Bushings 28 16 Capacitors .28 17 Overcurrent Protection 29 18 Semiconductors 29 19 Switches .29 20 Transformers, Coils, and Relays 29 SPACINGS 21 General 29 PERFORMANCE 22 General 30 23 Test Samples and Miscellane
21、ous Data 30 24 FCC Requirements .30 25 Test Voltages 30 TESTS 26 Normal Operation Test 32 27 Circuit Protection Test .32 28 Input Test 32 29 Power Supply Test 33 29.1 General .33 29.2 Battery tests .33 30 Power Failure Test 34 31 Component Malfunction Test .34 32 Undervoltage Operation Test .34 33 O
22、vervoltage Operation Test 35 34 Variable Ambient Temperature Test .35 35 Humidity Test 35 36 Leakage Current Tests for Cord-Connected Products .35 37 Electric Shock Current Test 37 38 Overload Test 43 38.1 General .43 38.2 Separately energized circuits 43 39 Endurance Test 43 39.1 General .43 39.2 S
23、eparately energized circuits 43 40 Jarring Test 44 41 Temperature Test .44A 42 Dielectric Voltage-Withstand Test .48 43 Abnormal Operation Test 49 44 Electrical Transient Tests 50 44.1 General .50 44.2 Supply line transients .50 MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 4UL COPYRIGHTED
24、MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 44.3 Internally induced transients 50A 44.4 Input/output circuit transients .50A 45 AC Induction Test .51 46 Radio Frequency Interference Test .52 47 Polymeric Materials Test .54 48 Battery Replacement Test .
25、54 49 Drop Test 54 50 Strain Relief Test .54 50.1 Flexible cords 54 50.2 Field-wiring leads .54 51 Ignition Through Bottom-Panel Openings Tests .55 51.1 General .55 51.2 Hot, aming oil .55 51.3 Molten PVC and copper .55 52 Mechanical Strength Tests for Enclosures .56 53 Tests on Special Terminal Ass
26、emblies 56 53.1 General .56 53.2 Disconnection and reconnection .56 53.3 Mechanical secureness .57 53.4 Flexing test 57 53.5 Millivolt drop test .57 53.6 Temperature test .57 54 Marking Permanency Tests 57 SHORT RANGE RADIO FREQUENCY (RF) OPERATED INITIATING DEVICES 55 General 58 56 Time to Report A
27、larm .58 57 Inoperative Transmitter Reporting .58 58 Battery Status Indication .59 59 Tamper Protection 59 60 Interference Protection 59 61 Reference Level Determination .60 61.1 Method I 60 61.2 Method 2 62 62 Interference Immunity .64 63 Frequency Selectivity 65 64 Clash 66 65 Clash Error 67 66 Er
28、ror (Falsing) Rate .67 67 Throughput Rate 68 68 Transmitter Stability Test 69 69 Transmitter Accelerated Aging Test .70 70 Installation Instructions and User Manual 70 71 Test .70 72 Drop Test 70 MANUFACTURING AND PRODUCTION TESTS 73 General 70 74 Production Line Dielectric Voltage-Withstand Test fo
29、r High-Voltage Products 71 75 Production Line Grounding Continuity Test for High-Voltage Cord-Connected Products .71 MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 4AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARKING 76 General
30、72 ACCESSORY EQUIPMENT 77 General 74 78 Construction .74 79 Performance (Installation) Test .75 80 Markings .75 OPERATION AND ELECTRICAL SUPERVISION 81 General 75 POWER SUPPLIES 82 General 76 83 Battery Standby 76 84 Rechargeable Batteries 76 85 Nonrechargeable Batteries .77 INSTALLATION 86 Types of
31、 Remote Stations .78 87 Extent of Protection .78 87.1 General .78 87.2 Bandit-Resisting Enclosure and Alarm 78 87.3 Semiautomatic Alarm .78 87.4 Manual Alarm 79 OUTSIDE CABLES 88 General 79 88.1 General .79 88.2 Underground wires .79 88.3 Overhead wires 80 WIRES INSIDE BUILDING 89 General 80 89.1 Ge
32、neral .80 89.2 Running and fastening 81 89.3 Splices and connections 81 89.4 Separation of interconnecting and protective wiring from other wiring or objects 81 89.5 Passage through oors and walls 81 MAINTENANCE 90 General 82 MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 4BUL COPYRIGHTED MA
33、TERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Appendix A Standards for ComponentsA1 MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page
34、 intentionally left blank. OCTOBER 3, 2008 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover holdup alarm systems of the remote-station type intended fo
35、r installation in banks, stores, cashiers cages, pay offices, and the like to provide a means of transmitting a silent call for help in the event of interior robbery. These systems are divided into the three classes listed in 1.2 and are dened under Extent of Protection, Section 87. 1.2 The three cl
36、asses are: Bandit-Resisting Enclosure and Alarm, Semiautomatic Alarm, and Manual Alarm. 1.3 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of re or of electric sho
37、ck or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conict with specic req
38、uirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 1.3 revised March 30, 2001 2 General 2.1 Components 2.1.1 Excep
39、t as indicated in 2.1.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by this standard. 2.1.1 revised March 30, 2001 2.1.2 A component is not required t
40、o comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.1.2 revised March 30, 2001 2.1.3 A component shall be used in accordance
41、 with its rating established for the intended conditions of use. 2.1.3 revised March 30, 2001 2.1.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures no
42、t exceeding specied limits, and shall be used only under those specic conditions. 2.1.4 revised March 30, 2001 MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Units of measurement 2
43、.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 2.2.1 revised March 30, 2001 2.2.2 Unless otherwise indicated, all voltage and current values mentioned in this standard are rms. 2.3 Undated references 2.3.1 Any undated ref
44、erence to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 2.4 Terminology 2.4.1 The term product as used in this standard refers to all types of holdup alarm units. 3 Glossary 3.1 For the purpose of t
45、his standard the following denitions apply. 3.2 ALARM INITIATING DEVICE A switch operated by hand or foot, by key, by removal of currency bills, or by other means to initiate a holdup alarm signal. 3.3 CIRCUITS, ELECTRICAL : a) HIGH-VOLTAGE A circuit involving a potential of not more than 600 volts
46、and having circuit characteristics in excess of those of a low-voltage power limited circuit. b) LOW-VOLTAGE A circuit involving a potential of not more than 30 volts AC, rms, 42.4 volts DC or AC peak. c) POWER LIMITED A circuit whose output is limited as specied in Tables 3.1 and 3.2. The power lim
47、itation shall be provided by the construction of the transformer, a xed impedance, a noninterchangeable fuse, a nonadjustable manual reset circuit protective device, or a regulating network. MARCH 30, 2001 HOLDUP ALARM UNITS AND SYSTEMS - UL 636 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER RE
48、PRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 3.1 Power limitations for inherently limited power source (Overcurrent protection not required) Circuit voltage V max a AC-DC, (volts) Maximum nameplate ratings Current limitation I max , b (amperes) VA, (volt amperes) Current, (amperes) 0t
49、 o2 0 5 . 0 V max a 5.0 8.0 over 20 to 30 100 100/V max a 8.0 over 30 to 100 100 100/V max a 100/V max a over 100 to 250 DC only 0.030 V max a 0.030 0.030 NOTE Reproduced in part from the National Electrical Code ( NFPA 70), 1996 Edition, copyright National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. a V max : Maximum output voltage regardless of load with rated input applied. b I max : Maximum output after 1 minute of operation under any noncapacitive
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1