ANSI UL 639-2007 UL Standard for Safety Intrusion-Detection Units (Eighth Edition Reprint with Revisions Through and Including July 09 2018)《侵入探测装置标准》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 639 Intrusion-Detection UnitsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPR

2、ODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Intrusion-Detection Units, UL 639 Eighth Edition, Dated August 31, 2007 Summary of Topics Revision pages have been issued to reect the latest ANSI approval date and to incorporate revisions to the Corrosion Test. Text tha

3、t has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the

4、changed requirement becomes effective. The revised requirements are substantially in accordance with Proposal(s) on this subject dated February 12, 2010 and March 11, 2011. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by

5、 any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no

6、event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised o

7、f the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss,

8、 expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs

9、, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPE

10、RSEDED REQUIREMENTS notice. MAY 15, 2012 UL 639 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MAY 15, 2012 UL 639 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION

11、 FROM UL AUGUST 31, 2007 (Title Page Reprinted: May 15, 2012) 1 UL 639 Standard for Intrusion-Detection Units First Edition April, 1964 Second Edition October, 1969 Third Edition December, 1971 Fourth Edition September, 1978 Fifth Edition September, 1986 Sixth Edition July, 1993 Seventh Edition Febr

12、uary, 1997 Eighth Edition August 31, 2007 This ANSI/UL Standard for Safety consists of the Eighth edition including revisions through May 15, 2012. The most recent designation of ANSI/UL 639 as an American National Standard (ANSI) occurred on May 15, 2012. ANSI approval for a standard does not inclu

13、de the Cover Page, Transmittal Pages, Title Page, or effective date information. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) a

14、t http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2012 UND

15、ERWRITERS LABORATORIES INC. ANSI/UL 639-2012UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUT

16、ION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .8 2 General 8 2.1 Components .8 2.2 Units of measurement .9 2.3 Undated references .9 2.4 Terminology .9 3 Glossary .9 4 Instructions and Drawings .10 CONSTRUCTION ALL UNITS ASSEMBLY 5 General .10 6 Test Features .11 7 Enclosure .11 7.1 G

17、eneral 11 7.2 Cast metal 17 7.3 Sheet metal 17 7.4 Nonmetallic .18 7.5 Doors and covers .19 7.6 Screens and expanded metal .21 8 Electric Shock .22 9 Corrosion Protection .22 FIELD WIRING 10 Field Wiring Connections 23 10.1 General .23 10.2 Field wiring compartment 23 10.3 Terminals (general applica

18、tion) .23 10.4 Terminals (qualied application) 25 10.5 Field wiring leads .26 10.6 Cords and plugs .26 11 Polarity Identication 27 INTERNAL WIRING 12 General 27 13 Separation of Circuits .28 14 Bonding for Grounding 29 ELECTRICAL COMPONENTS 15 General 30 15.1 Insulating materials .30 15.2 Mounting o

19、f parts 31 15.3 Current carrying parts .31 AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 16 Bushings 31 17 Transformers, Coils, and Relays 32 18 Switches .32 19 Overcurrent Protection 32

20、20 Semiconductors 32 SPACINGS 21 General 32 PERFORMANCE ALL UNITS 22 General 34 22.1 Test units and data .34 22.2 Test samples and miscellaneous data 34 22.3 Test voltages 35 23 Normal Operation Test 35 24 Current Protection Test 35 25 Input Test 36 26 Power-Limited Circuits .36 26.1 General .36 26.

21、2 Maximum voltage 39 26.3 Maximum current .39 26.4 VA max (Not inherently limited circuits only) .39 27 Electrical Supervision Test .40 28 Sensitivity and Range Tests 40 29 Voltage Variation Test .40 30 Variable Ambient Test .41 31 Humidity Test 41 32 Leakage Current Tests for Cord-Connected Product

22、s .41 33 Electric Shock Current Test 45 34 Corrosion Test .49 34.1 General .49 34.2 Test equipment 50 35 Overload Test 51 35.1 General .51 35.2 Circuits energized from a separate power source 51 36 Endurance Test 51 36.1 General .51 36.2 Circuits energized from a separate power source 52 37 Jarring

23、Test 52 38 Vibration Test 53 39 Power Supply Test 54 39.1 Power supply 54 39.2 Battery tests .55 40 Power Failure Test 55 41 Dielectric Voltage-Withstand Test .56 42 Static Discharge Test .57 43 Temperature Test .57 44 Abnormal Operation Test 61 45 Transient Tests .61 45.1 General .61 45.2 Supply li

24、ne transients .61 AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 45.3 Internally induced transients .62 45.4 Input/output circuit transients 62 46 AC Induction Test .63 47 Radio Frequency

25、Interference 64 47.1 General .64 47.2 Induced interference 65 47.3 Radiated interference .65 48 Stability Test .66 49 Tests on Polymeric Materials .66 49.1 Temperature test .66 49.2 Flame test .66 50 Battery Replacement Test .67 51 Drop Test 68 52 Strain Relief Test .68 52.1 Power supply cord 68 52.

26、2 Field-wiring leads .68 53 Ignition Through Bottom-Panel Openings Test 69 53.1 General .69 53.2 Hot, aming oil .69 54 Mechanical Strength Tests for Enclosures .70 55 Special Terminal Assemblies Tests .71 55.1 General .71 55.2 Disconnection and reconnection .71 55.3 Mechanical secureness .71 55.4 Fl

27、exing test 71 55.5 Millivolt drop test .72 55.6 Temperature test .72 PERFORMANCE OUTDOOR USE EQUIPMENT 56 General 72 57 Rain Test 72 58 Dust Test 76 SHORT RANGE RADIO FREQUENCY (RF) DEVICES 59 General 76 MANUFACTURING AND PRODUCTION TESTS 60 General 77 61 Production Line Dielectric Voltage-Withstand

28、 Tests for High-Voltage Products .77 62 Production Line Grounding Continuity Tests for High-Voltage Cord-Connected Products 78 INSTALLATION AND PERFORMANCE GENERAL 63 Installation .78 64 Control 78 AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER

29、 REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SPECIFIC DETECTORS 65 Glass Breakage Detector 79 65.1 General .79 65.2 Sensitivity test .79 65.3 Attack test .80 65.4 Stability .80 65.5 Adhesive test 80 66 Photoelectric Detector .81 66.1 Visibility .81 66.2 Foreign light .81 66.3 Operating s

30、peed .82 66.4 Beam cutoff .82 66.5 Range 82 67 Sound Detector .82 67.1 General .82 67.2 Sensitivity .82 68 Movement Detector, Microwave Type .83 68.1 General .83 68.2 Sensitivity .83 68.3 Stability .84 68.4 Range 84 68.5 Maximum power density 85 69 Movement Detector, Sonic or Ultrasonic Type 85 69.1

31、 General .85 69.2 Sensitivity .85 69.3 Stability .85 69.4 Range 86 70 Movement Detector, Passive Infrared Type 86 70.1 General .86 70.2 Sensitivity .86 70.3 Stability .87 70.4 Range 87 71 Proximity Detector 87 71.1 General .87 71.2 Sensitivity .88 MARKING 72 General 88 73 Marking Permanency Tests 90

32、 73.1 General .90 73.2 Oven aging 90 73.3 Immersion .91 73.4 Outdoor exposure 91 74 Instructions and Drawings .91 ACCESSORY EQUIPMENT 75 General 92 76 Construction .92 77 Performance (Installation) Test .93 78 Markings .93 AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 6UL COPYRIGHTED MATERIAL N

33、OT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APPENDIX A Standards for Components .A1 AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scop

34、e 1.1 These requirements cover intrusion-detection units intended to be used in burglary-protection signaling systems. These units are intended to be used in indoor or outdoor locations to automatically indicate the presence of an intruder by actuating electrical control circuits. 1.2 An intrusion d

35、etector, as covered by these requirements, consists of one or more unit assemblies of electrical components that are designed to detect the presence, movement, sound or other activity of an intruder. Provision is made for connection to the assembly of power supply, remote control, and signal circuit

36、s by a prescribed method of wiring. 1.3 Intrusion-detection units covered by these requirements are intended to be installed in accordance with the Standard for Installation and Classication of Burglar and Holdup Alarm Systems, UL 681. 2 General 2.1 Components 2.1.1 Except as indicated in 2.1.2, a c

37、omponent of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by this standard. 2.1.2 A component is not required to comply with a specic requirement that: a) Involves a fe

38、ature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.1.3 A component shall be used in accordance with its rating established for the intended conditions of use. 2.1.4 Specic componen

39、ts are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only under those specic conditions. AUGUST 31, 2007 INTRUSION-DETECTI

40、ON UNITS - UL 639 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Units of measurement 2.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 2.2.2 Unless otherwise

41、 indicated, all voltage and current values mentioned in this standard are root-mean-square (rms). 2.3 Undated references 2.3.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard.

42、2.4 Terminology 2.4.1 The term product as used in these requirements refers to all types of household burglar-alarm system units. 2.4.2 Unless otherwise indicated, all voltage and current values in this standard are rms. 3 Glossary 3.1 For the purpose of these requirements, the following denitions a

43、pply. 3.2 CIRCUITS, ELECTRICAL a) High-Voltage (Class 1) A circuit involving a potential of not more than 600 volts and having circuit characteristics in excess of those of a low-voltage power-limited circuit. b) Low-Voltage A circuit involving a potential of not more than 30 volts AC rms, 42.4 volt

44、s peak or direct current (DC). c) Power-Limited A circuit wherein the power and current are limited as specied in Power- Limited Circuits, Section 26. d) Class2Acircuit in which the voltage and power limitations are in accordance with the requirements of Table 26.1 for AC circuits and Table 26.2 for

45、 DC circuits. e) Class3Acircuit in which the voltage and power limitations are in accordance with the requirements of Table 26.1 for AC circuits and Table 26.2 for DC circuits. 3.3 CORD-CONNECTED UNIT A unit intended for connection to the power source by means of a supply cord. Such a unit is intend

46、ed to be moved for reasons of interchange or realignment of the units of a system. 3.4 FIXED EQUIPMENT A product intended to be permanently connected electrically. 3.5 LINE VOLTAGE The voltage at any eld-connected source of supply, nominally 50 60 hertz; 115, 208, or 230 volts. 3.6 PORTABLE EQUIPMEN

47、T A cord- and plug-connected product that is capable of being carried or moved about. AUGUST 31, 2007 INTRUSION-DETECTION UNITS - UL 639 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3.7 PRIMARY BATTERY A battery that is not intended to b

48、e recharged. 3.8 RADIO FREQUENCY All frequencies above 20 kilohertz. 3.9 SAFETY CIRCUIT Any circuit that is relied upon to reduce the risk of re, electric shock, or unintentional contact with moving parts that may cause injury to persons (an interlock circuit, for example). 3.10 SECONDARY BATTERY A

49、battery that is intended to be recharged. 3.11 STANDBY CONDITION The ready-to-operate condition of the product existing prior to being tripped or operated by an intrusion. 3.12 STATIONARY EQUIPMENT A cord- and plug-connected product that is intended to be fastened in place or located in a dedicated space. 4 Instructions and Drawings 4.1 A copy of the installation and operating instructions intended to accompany the product, related schematic wiring diagrams, and in