ANSI UL 66-2002 UL Standard for Safety Fixture Wire (First Edition Reprint with Revisions Through and Including April 12 2016).pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 66 Fixture Wire STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHE

2、R REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Fixture Wire, UL 66 First Edition, Dated April 16, 2002 Summary of Topics: This revision of ANSI/UL 66 includes an updated title page to reect reaffirmation of ANSI approval. Text that has been changed in any manner

3、 or impacted by ULs electronic publishing system is marked with a vertical line in the margin. The revised requirements are substantially in accordance with Proposal(s) on this subject dated February 26, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval

4、system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantabi

5、lity or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized

6、 UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold U

7、L harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. APRIL 12, 2016 UL 66 tr1UL COPYRIGHTED MATE

8、RIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 12, 2016 UL 66 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 16, 2002 (Title Page Reprinted: April 12, 2016) 1 UL 6

9、6 Fixture Wire First Edition April 16, 2002 This ANSI/UL Standard for Safety consists of the First Edition including revisions through April 12, 2016. The most recent designation of ANSI/UL 66 as an American National Standard (ANSI) occurred on April 12, 2016. ANSI approval for a standard does not i

10、nclude the Cover Page, Transmittal Pages and Title Page. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards

11、for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2016 UNDERWRITERS LABORATORIES I

12、NC. ANSI/UL 66-2011 (R2016)UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JUNE 7, 2005 FIXTURE WIRE - UL 66 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CON

13、TENTS INTRODUCTION 1 Scope .7 2 Units of Measurement .7 3 References 7 4 Index Tables .7 CONSTRUCTION 5 Materials 18A 6 Conductor .18A 6.1 Metal 18A 6.2 Sizes .18B 6.3 Stranding .18B 6.4 Size verication .19 6.5 Continuity 20 6.6 Joints 20 6.7 Metal coating .20 7 Separator 20 8 Insulation .21 8.1 Mat

14、erial and application .21 8.2 Properties 22 8.3 Thicknesses 23 9 Jacket on Types TFN and TFFN 23 10 Covering on Other Wire Types .24 10.1 Elective braid on Types TF, TFF, and RFHH-2 and on XL-insulated Types RFHH-3, RFH-2, and FFH-2 .24 10.2 Braid or other covering on Types PF, PFF, PGF, PGFF, SF-1,

15、 SF-2, SFF-1, and SFF-2 .24 10.3 Extruded covering on silicone-insulated Type RFHH-3 and braid, wrap, or extruded covering on rubber-insulated Types RFH-2 and FFH-2 24A PERFORMANCE 11 Continuity Test of Conductor .32 12 D-C Resistance Test of Conductor 32 13 Spark Test 35 14 Deformation Test 35 15 C

16、old Bend Test .37 16 Test for Insulation Resistance at 60.0F (15.6C) 38 17 Flame Tests for VW-1 Wire .41 18 Vertical Flame Test 41 19 Flexing Test of Nylon Jacket on Types TFN and TFFN 41 20 Durability Test of Ink Printing .41 JUNE 7, 2005 FIXTURE WIRE - UL 66 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED

17、 FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARKINGS 21 Polarity Identication 42 22 Legibility of Printing 42A 23 Sequence of Printed Markings .42A 24 Responsible Organization and Factory Identication 42A 25 Temperature Identication .42B 26 Identication of Types TFN and TFFN

18、 That Are Resistant to Oil or Oil and Gasoline . .44 27 Identication of VW-1 Wire .45 28 Tag, Reel, and Carton Markings .45 29 Current Designation .46 30 Date of Manufacture .46 SUPPLEMENT SA - U.S. GOVERNMENT REQUIREMENTS AND ORDERING INSTRUCTIONS FOR ACQUISITION OF FIXTURE WIRE SA1 Scope SA1 SA2 R

19、equirements SA1 SA3 Quality Assurance SA2 SA4 Packaging .SA2 SA5 Ordering documents SA3 NOVEMBER 21, 2011 FIXTURE WIRE - UL 66 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL APRIL 16, 2002 FIXTURE WIRE - UL 66 5 No Text on This PageUL COPY

20、RIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. JUNE 7, 2005 FIXTURE WIRE - UL 66 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1

21、.1 This standard states basic construction, test, and marking requirements for xture wires. Fixture wires are single conductor and are of the following types: 600 volt Types: PTF, PTFF, PAF, PAFF, KF-2, KFF-2, PF, PFF, PGF, PGFF, SF-2, SFF-2, ZF, ZFF, ZHF, TF, TFF, TFN, TFFN, RFH-2, FFH-2, RFHH-2, a

22、nd RFHH-3 300 volt Types: KF-1, KFF-1, SF-1, SFF-1, XF, and XFF These types are for use as specied in Article 402 and other applicable parts of the National Electrical Code (NEC), ANSI / NFPA 70. These types are as described individually in index Tables 4.1 4.9 of this standard. 1.1 revised June 7,

23、2005 2 Units of Measurement 2.1 In addition to being stated in inch/pound units, each numerical requirement in this standard is also stated in units that make the requirement conveniently usable in the various metric systems (practical SI and customary). Equivalent although not necessarily exactly i

24、dentical results are to be expected from applying a requirement in inch/pound or metric terms. Equipment calibrated in metric units is to be used when a requirement is applied in metric terms. 3 References 3.1 Whenever the designation “UL 1581” is used in this wire standard, reference is to be made

25、to the designated part(s) of the Reference Standard for Electrical Wires, Cables, and Flexible Cords, UL 1581. 4 Index Tables 4.1 Tables 4.1 4.8 each serve as an index to the requirements for construction details, test performance, and marking of the wire types described in the particular table. Eac

26、h vertical column summarizes and references the requirements that apply to the particular wire whose type letters appear at the top of the column. The applicable paragraphs and tables in this standard (UL 66) are indicated in parenthesis. Square brackets . indicate the applicable parts of UL 1581. J

27、UNE 7, 2005 FIXTURE WIRE - UL 66 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.1 PTFE insulated Types PTF and PTFF a Table 4.1 revised July 16, 2003 Type-letter designation PTF PTFF Maximum temperature 250C (482F) 150C (302F) Maxi

28、mum voltage 600 CONDUCTOR Sizes 18, 16, and 14 AWG Metal Nickel-base alloy or nickel-coated copper (6.1.2) Nickel-coated copper or silver- coated copper (6.1.2) Stranding Solid or 7-strand (6.1.1, 6.2.2, and 6.3.1) Flexible-stranded (6.1.1, 6.2.2, and 6.3.1) Size verication (6.4.1, 6.4.2, and 6.4.3)

29、 (6.4.1 and 6.4.3) Maximum length of lay of strands 48 x individual strand diameter (6.3.2) (Table 6.2) General Continuity, joints, metal coating, and separator (6.5.1 7.3) INSULATION Material PTFE Table 50.219 of UL 1581 (8.1.1 8.1.4, 8.2.2.1, and 8.2.2.4) Minimum average thickness 20.0 mils or 0.5

30、1 mm (8.3.1) Minimum thickness at any point 18.0 mils or 0.46 mm (Table 8.1) Covering over the insulation No covering TESTS ON FINISHED WIRE Physical properties tests of insulation PTFE Table 50.219 of UL 1581 (8.2.2.1 and 8.2.2.4) Continuity test of conductor (6.5.1, 11.1, and 11.2) D-C resistance

31、test of conductor (12.1 12.3) Spark test (13.1) Deformation test Not applicable Cold bend test (15.1 15.7) Test for insulation resistance at 60F (16.1 and 16.2) Flame tests for VW-1 wire (elective) (17.1) Vertical ame test (required) (18.1) Durability test of ink printing (20.1) MARKINGS Polarity ID

32、 (21.1) Legibility of printing (22.1) Sequence of printed markings No sequence is specied (23.1) Responsible organization and factory IDs (24.1 24.3 and 24.5) Temperature ID (25.1 and 25.2) ID of VW-1 wire (27.1) Tag, reel, and carton markings (28.1) Current designation Prohibited (29.1) Date of man

33、ufacture (30.1) a Index tables are explained in 4.1. JULY 16, 2003 FIXTURE WIRE - UL 66 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.2 Polyimide tape insulated Types KF-1, KF-2, KFF-1, and KFF-2 a Table 4.2 revised July 16, 2003

34、Type-letter designation KF-1 KF-2 KFF-1 KFF-2 Maximum temperature 200C (392F) Maximum voltage 300 600 300 600 CONDUCTOR Sizes 18, 16, 14, 12, and 10 AWG Metal Nickel-base alloy or nickel- or silver-coated copper (6.1.2) Stranding Solid or 7-strand (6.1.1, 6.2.2, and 6.3.1) Flexible-stranded (6.1.1,

35、6.2.2, and 6.3.1) Size verication (6.4.1, 6.4.2, and 6.4.3) (6.4.1 and 6.4.3) Maximum length of lay of strands 48 x individual strand diameter (6.3.2) (Table 6.2) General Continuity, joints, metal coating, and separator (6.5.1 7.3) INSULATION Material Polyimide tape Minimum average thickness KF-1 an

36、d KFF-1: 5.5 mils or 0.14 mm KF-2 and KFF-2: 8.4 mils or 0.21 mm (8.3.1) Minimum thickness at any point KF-1 and KFF-1: 5.0 mils or 0.13 mm KF-2 and KFF-2: 7.6 mils or 0.19 mm (Table 8.1) Covering over the insulation No covering TESTS ON FINISHED WIRE Flexing test of insulation after conditioning (8

37、.2.1.1 8.2.1.6) Continuity test of conductor (6.5.1, 11.1, and 11.2) D-C resistance test of conductor (12.1 12.3) Spark test (13.1) Deformation test Not applicable Cold bend test (15.1 15.7) Test for insulation resistance at 60F (16.1 and 16.2) Flame tests for VW-1 wire (elective) (17.1) Vertical am

38、e test (required) (18.1) Durability test of ink printing (20.1) MARKINGS Polarity ID (21.1) Legibility of printing (22.1) Sequence of printed markings No sequence is specied (23.1) Responsible organization and factory IDs (24.1 24.3 and 24.5) Temperature ID (25.1 and 25.2) ID of VW-1 wire (27.1) Tag

39、, reel, and carton markings (28.1) Current designation Prohibited (29.1) Date of manufacture (30.1) a Index tables are explained in 4.1. JULY 16, 2003 FIXTURE WIRE - UL 66 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.3 FEP insula

40、ted Types PF, PGF, PFF, and PGFF a Table 4.3 revised July 16, 2003 Type-letter designation PF PGF PFF PGFF Maximum temperature 200C (392F) 150C (302F) Maximum voltage 600 CONDUCTOR Sizes 18, 16, and 14 AWG Metal Nickel-base alloy or nickel- or silver- coated copper (6.1.2) Nickel-base alloy or uncoa

41、ted or coated copper (6.1.1 and 6.1.2) Stranding Solid or 7-strand ( 6.1.1, 6.2.2, and 6.3.1) Flexible-stranded (6.1.1, 6.2.2, and 6.3.1) Size verication (6.4.1, 6.4.2, and 6.4.3) (6.4.1 and 6.4.3) Maximum length of lay of strands 48 x individual strand diameter (6.3.2) (Table 6.2) General Continuit

42、y, joints, metal coating, and separator (6.5.1 7.3) INSULATION Material FEP Table 50.73 of UL 1581 (8.1.1 8.1.4, 8.2.2.1, and 8.2.2.4) Minimum average thickness PF and PFF: 20.0 mils or 0.51 mm PGF and PGFF: 14.0 mils or 0.36 mm (8.3.1) Minimum thickness at any point PF and PFF: 18.0 mils or 0.46 mm

43、 PGF and PGFF: 12.6 mils or 0.32 mm (Table 8.1) Covering over the insulation: Elective on Types PF and PFF Required on Types PGF and PGFF Saturated glass or aramid-ber braid (10.2.1, 10.2.2, and 10.2.4) Other covering (10.2.5) TESTS ON FINISHED WIRE Physical properties tests of insulation FEP Table

44、50.73 of UL 1581 (8.2.2.1 and 8.2.2.4) Conductor corrosion test (uncoated copper only) No test 500.1 of UL 1581 (6.7.1) Continuity test of conductor (6.5.1, 11.1, and 11.2) D-C resistance test of conductor (12.1 12.3) Spark test (13.1) Deformation test (14.1 14.3) Cold bend test (15.1 15.7) Test for

45、 insulation resistance at 60F (16.1 and 16.2) Flame tests for VW-1 wire (elective) (17.1) Vertical ame test (required) (18.1) Flexing test of covering (10.2.4 and 10.2.5) Durability test of ink printing Not applicable JULY 16, 2003 FIXTURE WIRE - UL 66 10 Table 4.3 Continued on Next PageUL COPYRIGHT

46、ED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Table 4.3 Continued Type-letter designation PF PGF PFF PGFF MARKINGS Polarity ID (21.2 and 21.3) Legibility of printing (22.1) Sequence of printed markings No sequence is specied (23.1) Responsible organiz

47、ation and factory IDs (24.1, 24.3, and 24.4) Temperature ID (25.1 and 25.2) ID of VW-1 wire (27.1) Tag, reel, and carton markings (28.1) Current designation Prohibited (29.1) Date of manufacture (30.1) a Index tables are explained in 4.1. Table 4.4 Silicone rubber insulated Types SF-1, SFF-1, SF-2,

48、and SFF-2 a Table 4.4 revised June 7, 2005 Type-letter designation SF-1 SF-2 SFF-1 SFF-2 Maximum temperature 200C (392F) 150C (302F) Maximum voltage 300 600 300 600 CONDUCTOR Sizes 18 AWG 18, 16, 14, 12, and 10 AWG 18 AWG 18, 16, 14, 12, and 10 AWG Metal Nickel-base alloy or copper coated with tin,

49、nickel, or silver (6.1.1 and 6.1.2) Stranding Solid or 7-strand (6.1.1, 6.2.2, and 6.3.1) Flexible-stranded (6.1.1, 6.2.2, and 6.3.1) Size verication (6.4.1 6.4.3) (6.4.1 and 6.4.3) Maximum length of lay of strands 48 x strand dia (6.3.2) (Table 6.2) General Continuity, joints, metal coating, and separator (6.5.1 7.3) INSULATION Material Silicone rubber Table 50.210 of UL 1581 (8.1.1 8.1.4, 8.2.2.1, 8.2.2.4) Minimum average thickness SF-1