ANSI UL 729-2003 UL Standard for Safety Oil-Fired Floor Furnaces (Sixth Edition Reprint with Revisions Through and Including November 22 2016)《燃油的地板炉》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 729 Oil-Fired Floor Furnaces STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZ

2、ED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Oil-Fired Floor Furnaces, UL 729 Sixth Edition, Dated August 29, 2003 Summary of Topics This revision of ANSI/UL 729 is being issued to reaffirm approval as an American National Standard. No changes in

3、requirements are involved. The revisions are substantially in accordance with Proposal(s) on this subject dated September 30, 2016. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of t

4、his publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including

5、but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the in

6、ability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs St

7、andards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers com

8、puter system. NOVEMBER 22, 2016 UL 729 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 22, 2016 UL 729 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FRO

9、M UL AUGUST 29, 2003 (Title Page Reprinted: November 22, 2016) 1 UL 729 Standard for Oil-Fired Floor Furnaces First Edition May, 1955 Second Edition July, 1974 Third Edition March, 1976 Fourth Edition December, 1987 Fifth Edition December, 1994 Sixth Edition August 29, 2003 This ANSI/UL Standard for

10、 Safety consists of the Sixth edition including revisions through November 22, 2016. The most recent designation of ANSI/UL 729 as a Reaffirmed American National Standard (ANS) occurred on November 22, 2016. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, and Title P

11、age. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Neither a printed

12、 nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2016 UNDERWRITERS LABORATORIES INC. ANSI/UL 729-2008 (R2016)UL COPYRIGHTED MATERIAL

13、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 1, 2008 OIL-FIRED FLOOR FURNACES - UL 729 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .7 2 Ge

14、neral 7 3 Glossary 7 3A Undated References 12 4 Components .12 CONSTRUCTION MECHANICAL 5 Assembly .12 6 Servicing .14 7 Moving Parts 14 8 Disposal of Combustion Products 15 9 Casing .15 10 Support .16 11 Radiation Shield .17 12 Materials in an Air Handling Compartment 17 13 Air Filter 18 14 Combusti

15、on Chamber 18 15 Radiator 18 16 Heating Surface Joints .18 17 Baffles .19 18 Flue Collar 20 19 Damper and Draft Regulator 20 20 Field Wiring System Connections 20 CONSTRUCTION ELECTRICAL 21 Controls .21 21.1 Application 21 21.2 Limit control 22 21.3 Primary safety control 23 22 Field Wiring 23 22.1

16、General .23 22.2 Leads and terminals .24 23 Internal Wiring 26 23.1 General .26 23.2 Methods .27 23.3 Short circuit protection .30 24 Separation of Circuits .30 25 Bonding for Grounding .31 26 Servicing and Adjustment .32B 27 Electrical Components .34 28 Mounting of Electrical Components 34 29 Elect

17、rical Enclosures .35 29.1 General .35 29.2 Doors and covers .38 30 Motors and Motor Overload Protection .40 OCTOBER 1, 2008 OIL-FIRED FLOOR FURNACES - UL 729 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 31 Switches and Controllers .44 32

18、 Capacitors 44 33 Electrical Insulating Material 45 34 Spacings High-Voltage Circuits 45 35 Spacings Low-Voltage Circuits 46 36 Accessibility of Uninsulated Live Parts, Film-Coated Wire, and Moving Parts .47 PERFORMANCE 37 General 53 38 Test Installation .53 38.1 Enclosure .53 38.2 Chimney connector

19、 57 39 Instrumentation .57 39.1 Draft measurement 57 39.2 Fuel input measurement .58 39.3 Power measurement .58 39.4 Speed measurement 58 39.5 Temperature measurement .58 40 Initial Test Conditions 62 40.1 General .62 40.2 Furnace equipped with mechanical atomizing burner 63 40.3 Furnace equipped wi

20、th vaporizing burner .63 41 Combustion Test Burner and Furnace .63 42 Limit Control Cutout Test .64 43 Continuity of Operation Test 64 44 Temperature Tests 65 45 Maximum Register Temperature Test 69 46 Continuous-Operation Temperatures Test 69 47 Blocked Register Test 69 48 Blocked Inlet Test .70 49

21、 Fan Failure Test .71 50 Fan Motor Failure Test .72 51 Seepage and Burnoff Test 72 52 Register Strength Test .73 53 Short-Circuit Test 73 54 Dielectric Voltage-Withstand Test 75 55 Adhesive Secureness Test for Insulating Materials 76 56 Flammability Tests for Materials in Air Handling Compartments .

22、76 57 Strain Relief Test 77 58 Bonding-Conductor Test 77 59 Torque Test on Screws and Bolts .78 MANUFACTURING AND PRODUCTION TESTS 60 General 79 MARKING 61 General 80 AUGUST 29, 2003 OIL-FIRED FLOOR FURNACES - UL 729 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WI

23、THOUT PERMISSION FROM UL INSTRUCTIONS 62 Operating and Installation Instructions .82 APPENDIX A Standards for ComponentsA1 AUGUST 29, 2003 OIL-FIRED FLOOR FURNACES - UL 729 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intention

24、ally left blank. OCTOBER 1, 2008 OIL-FIRED FLOOR FURNACES - UL 729 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements apply to oil-red oor furnaces. 1.2 Requirements for the installation and use of o

25、il-burning equipment are included in the Standard for the Installation of Oil-Burning Equipment, ANSI/NFPA 31. Requirements for the installation of oil-burning equipment are also included in codes such as the International Mechanical Code and the Uniform Mechanical Code. 1.2 revised October 1, 2008

26、1.3 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of re or of electric shock or injury to persons shall be evaluated using appropriate additional component and en

27、d-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conict with specic requirements or provisions of this standard does not comply with this standard. Revision of

28、 requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 2 General 2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 3 Glossary 3.1 F

29、or the purpose of this standard, the following denitions apply. 3.2 AIR SHUTTER An adjustable device for varying the size of the air inlet or inlets regulating primary or secondary air, or both. 3.3 ANTIFLOODING DEVICE A primary safety control which causes the fuel ow to be shut off upon a rise in f

30、uel level or upon receiving excess fuel, and which operates before excessive discharge of fuel can occur. 3.4 APPLIANCE FLUE The ue passages within the appliance. 3.5 AUTOMATICALLY LIGHTED APPLIANCE An appliance in which fuel in the main burner is turned on and ignited automatically. 3.6 BAFFLE An o

31、bject placed in an appliance to direct the ow of air or ue gases. 3.7 BASE The main supporting frame or structure of the furnace, exclusive of legs. 3.8 BURNER A device for the nal conveyance of fuel and air to the combustion zone. 3.9 BURNER, MANUALLY LIGHTED A burner in which fuel to the main burn

32、er is turned on only by hand and ignited under supervision. OCTOBER 1, 2008 OIL-FIRED FLOOR FURNACES - UL 729 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3.10 BURNER, MECHANICAL ATOMIZING A power-operated burner that prepares and delive

33、rs the fuel and all or part of the air by mechanical process in controllable quantities for combustion. Some examples are air atomizing, high- and low-pressure atomizing, horizontal and vertical rotary atomizing, and vertical rotary wall-ame burners. 3.11 BURNER, MECHANICAL DRAFT A burner that inclu

34、des a power-driven fan, blower, or other mechanism as the principal means for supplying air for combustion. 3.12 BURNER, NATURAL DRAFT A burner that principally depends upon the natural draft created in the ue to induce into the burner the air required for combustion. 3.13 BURNER, VAPORIZING A burne

35、r consisting of a fuel-vaporizing bowl or other receptacle to which liquid fuel may be fed in controllable quantities; the heat of combustion is used to vaporize the fuel, with provision for admitting air and mixing it with the fuel vapor in combustible proportions. 3.14 CASING An enclosure forming

36、the outside of the appliance, no parts of which are likely to be subjected to intense heat. 3.15 CENTRAL HEATING APPLIANCE A stationary indirect-red vented appliance comprising the following categories: boilers, central furnaces, oor furnaces, and recessed heaters. A oor mounted unit heater to be co

37、nnected to a duct system is categorized also as a central heating appliance. 3.16 CHIMNEY CONNECTOR The pipe that connects a solid or liquid fuel-burning appliance to a chimney. 3.17 COMBUSTIBLE MATERIAL Combustible material as pertaining to materials adjacent to or in contact with heat-producing ap

38、pliances, chimney connectors and vent connectors, refers to material made of or surfaced with wood, compressed paper, plant bers, or other material that will ignite and burn. Such material is to be considered as combustible even though ameproofed, re-retardant treated, or plastered. 3.18 COMBUSTION

39、The rapid oxidation of fuel accompanied by the production of heat or heat and light. 3.19 COMBUSTION CHAMBER The portion of an appliance within which combustion occurs. 3.20 COMBUSTION (FLAME) SAFEGUARD A safety combustion control. 3.21 CONSTANT LEVEL VALVE A device that maintains a constant level o

40、f fuel in a reservoir for delivery to the burner. 3.22 CONTROL A device intended to regulate the fuel, air, water, or electrical supply to the controlled equipment. It may be automatic, semiautomatic, or manual. 3.23 CONTROL, LIMIT An automatic safety control responsive to changes in liquid level, p

41、ressure, or temperature, for limiting the operation of the controlled equipment. 3.24 CONTROL, SAFETY An automatic control, including a relay, switch, or other auxiliary equipment used in conjunction therewith to form a safety control system that is intended to reduce the likelihood of operation of

42、the controlled equipment that may result in a risk of re or injury to persons. 3.25 CONTROL, PRIMARY SAFETY An automatic safety control intended to reduce the likelihood of abnormal discharge of fuel at the burner in case of ignition failure or ame failure. AUGUST 29, 2003 OIL-FIRED FLOOR FURNACES -

43、 UL 729 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 3.26 CONTROL, SAFETY COMBUSTION A primary safety control responsive directly to ame properties, sensing the presence of ame and causing fuel to be shut off in event of ame failure. 3.2

44、7 DAMPER A valve or plate for regulating draft or ow of ue gases. A damper is generally considered as being located on the downstream side of the combustion chamber, usually in a ue passage of the appliance or in the chimney connector. 3.28 DAMPER, AUTOMATICALLY OPERATED A damper operated by an auto

45、matic control. 3.29 DAMPER, MANUALLY OPERATED An adjustable damper manually set and locked in the position intended to be used. 3.30 DRAFT The differential in static pressure available, between any two locations, to provide the energy potential for the moving of either air for combustion, products o

46、f combustion, or both through a fuel-burning heat-exchanging apparatus. 3.31 DRAFT REGULATOR A device that functions to maintain a desired draft in the appliance by automatically reducing the chimney draft to the desired value. 3.32 ELECTRICAL CIRCUITS: a) High-Voltage Circuit A circuit involving a

47、potential of not more than 600 volts and having circuit characteristics in excess of those of a low-voltage circuit. b) Low-Voltage Circuit A circuit that involves a potential of not more than 30 volts rms alternating-current (42.4 volts peak) or direct current and supplied by: 1) A primary battery,

48、 2) A Class 2 transformer, or 3) A combination of transformer and xed impedance that, as a unit, complies with all the performance requirements for a Class 2 transformer. A circuit derived from a high-voltage circuit by connecting resistance in series with the supply circuit as a means of limiting t

49、he voltage and current is not considered to be a low-voltage circuit. c) Safety Control Circuit A circuit involving one or more safety controls. 3.33 EXCESS AIR Air that passes through the combustion area and the appliance ues in excess of that which is required for complete combustion. 3.34 FLUE COLLAR That portion of an appliance constructed for attachment of the chimney connector. 3.35 FLUE GASES Combustion products