ANSI UL 752-2006 Bullet-Resisting Equipment (Proposals dated 10 20 06)《防弹设备(推荐日期2006-10-20）》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 752ISBN 0-7629-1080-1Bullet-Resisting EquipmentCopyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without licen

2、se from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCopyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MAT

3、ERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Bullet-Resisting Equipment, UL 752Eleventh Edition, Dated September 5, 2005Revisions: This Standard contains

4、 revisions through and including December 21, 2006.Summary of TopicsThese revisions add bullet resisting requirements to resist .50 Caliber and 7.62 mm ArmorPiercing Rounds.UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language(SGML). SGML - an international

5、 standard (ISO 8879-1986) - is a descriptive markup language thatdescribes a documents structure and purpose, rather than its physical appearance on a page. Due toformatting differences resulting from the use of ULs new electronic publishing system, please note thatadditional pages (on which no requ

6、irements have been changed) may be included in revision pages dueto relocation of existing text and reformatting of the Standard.The revisions dated December 21, 2006 include a reprinted title page (page1) for this Standard.As indicated on the title page (page 1), this UL Standard for Safety is an A

7、merican National Standard.Attention is directed to the note on the title page of this Standard outlining the procedures to be followedto retain the approved text of this ANSI/UL Standard.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of

8、 the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirem

9、ents for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette

10、 should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any

11、 means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without

12、 warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.DECEMBER 21, 2006 UL 752 tr1Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking

13、permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIn no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data,

14、 or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of

15、 the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they

16、 are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and elec

17、tronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviatio

18、n introduced while purchaser is storing anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagede

19、vice of a multiple-user computer in such a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-

20、server, or on the permanent storage device of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word sear

21、ch, and the like. Only one copy of the Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer set

22、up used by UL and those of electronic Standards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair an

23、d/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have b

24、een revised and that have a future effective dateare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with

25、a specified future effective date, unlessthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continu

26、ed Listing, Recognition and Follow-Up Services afterthe effective date, and understanding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.DECEMBER 21, 2006 UL 752tr2Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo repr

27、oduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis Standard consists of pages dated as shown in the following checklist:Page Date1-3 December 21, 20064-5.September 9, 20056-8B .De

28、cember 21, 20069.September 9, 200510-16 December 21, 200617-80.September 9, 2005A1-A2 .March 29, 2006DECEMBER 21, 2006 UL 752 tr3Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIG

29、HTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 21, 2006 UL 752tr4No Text on This PageCopyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,

30、-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSEPTEMBER 5, 2005(Title Page Reprinted: December 21, 2006)1UL 752Standard for Bullet-Resisting EquipmentFirst Edition April, 1942Second Edition July, 1946Third Edition July, 1956Fourth Edition

31、 February, 1973Fifth Edition February, 1974Sixth Edition October, 1979Seventh Edition December, 1985Eighth Edition January, 1991Ninth Edition January, 1995Tenth Edition March, 2000Eleventh EditionSeptember 9, 2005The most recent designation of ANSI/UL 752 as an American National Standard(ANSI) occur

32、red on December 21, 2006.This ANSI/UL Standard for Safety, which consists of the Eleventh edition withrevisions through December 21, 2006, is under continuous maintenance,whereby each revision is ANSI approved upon publication.An effective date included as a note immediately following certain requir

33、ementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmittal notic

34、ethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-LineCollaborative Standards Development System (CSDS) at http:/.ISBN 0-7629-1080-

35、1COPYRIGHT 1974, 2006 UNDERWRITERS LABORATORIES INC.ANSI/UL 752-2006Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTR

36、IBUTION WITHOUT PERMISSION FROM ULDECEMBER 21, 2006BULLET-RESISTING EQUIPMENT - UL 7522No Text on This PageCopyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTH

37、ORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .62 General 62.1 Components .62.2 Units of measurement .72.3 Undated references .73 Specifications and Ammunition .74 Glossary .85 Installation and Operating Instructions .96 Protection of Service Pe

38、rsonnel .9CONSTRUCTION BULLET-RESISTING EQUIPMENT AND MATERIALS7 Gunports 108 Speaking Apertures 109 Deal Trays and Package Passers 1010 Intercommunication System 1111 Barriers and Building Components 11PERFORMANCE BULLET-RESISTING MATERIALS12 General 1113 Bullet-Resisting Material .1214 Bullet-Resi

39、sting Glazing Material 1215 Assemblies 1316 Shotgun Tests 1317 Ballistics Test 1417.1 Levels110andsupplementary shotgun 1417.2 Levels13andsupplementary shotgun 1517.3 Levels 4, 5, 9 or 10 .1517.4 Levels15,Level 9, and supplementary shotgun .1517.5 Levels68 .1517.6 Indoor use material .1617.7 Outdoor

40、 use material .16CONSTRUCTION GENERAL18 Enclosures .1618.1 General .1618.2 Openings 1818.3 Cast metal .2418.4 Sheet metal .2418.5 Nonmetallic 2719 Accessibility of Live or Moving Parts 2819.1 Electric shock 2819.2 General .2819.3 Interlocks and protective devices .2919.4 Covers 2920 Mechanical Assem

41、bly .30DECEMBER 21, 2006 BULLET-RESISTING EQUIPMENT - UL 752 3Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTIO

42、N WITHOUT PERMISSION FROM UL21 Protection Against Corrosion .3122 Field Wiring Connections 3122.1 General .3122.2 Field wiring compartment 3122.3 Permanently-connected equipment .3222.4 Terminals (general application) .3222.5 Terminals (qualified application) 3422.6 Leads .3522.7 Polarity identifica

43、tion 3522.8 Cord-connected equipment 3522.9 Bushings 3623 Internal Wiring 3623.1 General .3623.2 Separation of circuits .3724 Bonding for Grounding 3825 Equipment Grounding Connection 3926 Electrical Components .4026.1 Capacitors .4026.2 Lampholders and lamps .4126.3 Overcurrent protection 4126.4 Tr

44、ansformers, coils, and relays .4126.5 Switches 4126.6 Semiconductors 4226.7 Printed-wiring boards .4227 Current-Carrying Parts 4228 Insulating Material 4229 Motors .4329.1 General .4329.2 Overload protection .4330 Spacings 44PERFORMANCE ELECTRICAL AND MECHANICAL EQUIPMENT31 General 4632 Test Samples

45、 and Miscellaneous Data 4632.1 Samples 4632.2 Test voltages 4733 Input Test 4734 Power-Limited Circuits .4734.1 General .4734.2 Maximum voltage 5034.3 Maximum current .5034.4 VAmax(Not inherently limited circuits only) .5035 Starting Current Test 5136 Voltage Variations Test 5137 Variable Ambient Te

46、mperature Test .5138 Humidity Test 5239 Leakage Current Test for Cord-Connected Products 5240 Electric Shock Current Test 5541 Overload Test 5942 Endurance Test 6043 Rain Test 6044 Dielectric Voltage-Withstand Test .63SEPTEMBER 9, 2005BULLET-RESISTING EQUIPMENT - UL 7524Copyright Underwriters Labora

47、tories Inc. Provided by IHS under license with ULNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL45 Temperature Test .6446 Abnormal Operation Test 6847 Solenoid

48、 Burnout Test .6848 Motor Overload Test 6949 Polymeric Materials Test .7050 Strain Relief Test .7050.1 General .7050.2 Field-wiring leads .7050.3 Push-back test .7051 Ignition Through Bottom-Panel Openings Tests .7151.1 General .7151.2 Hot, flaming oil .7252 Mechanical Strength Tests for Enclosures .7353 Tests on Special Terminal Assemblies 7353.1 General .7353.2 Disconnection and reconnection .7353.3 Mechanical secureness .7453.4 Flexing test 7453.5 Millivolt drop test .7453.