ANSI UL 867-2011 UL Standard for Safety Electrostatic Air Cleaners (Fifth Edition Reprint with Revisions Through and Including September 16 2016)《静电空气净化器》.pdf

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 867 Electrostatic Air Cleaners STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHOR

2、IZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Electrostatic Air Cleaners, UL 867 Fifth Edition, Dated August 4, 2011 Summary of Topics This revision to ANSI/UL 867 is being issued to incorporate the following: Addition of requirements for househo

3、ld appliances incorporating button or coin cell batteries Addition of grounding symbol Editorial changes part of universal upkeep Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. The new/revised requirements are su

4、bstantially in accordance with Proposal(s) on this subject dated July 29, 2016. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permis

5、sion of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damag

6、es, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed

7、the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulti

8、ng from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. SEPTEMBER 16, 2016 UL 867 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 16, 2016 UL 867 tr2 No Text

9、 on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 4, 2011 (Title Page Reprinted: September 16, 2016) 1 UL 867 Standard for Electrostatic Air Cleaners First Edition December, 1980 Second Edition October, 1989 Third Edition M

10、arch, 1995 Fourth Edition October, 2000 Fifth Edition August 4, 2011 This ANSI/UL Standard for Safety consists of the Fifth Edition including revisions through September 16, 2016. The most recent designation of ANSI/UL 867 as an American National Standard (ANSI) occurred on September 16, 2016. ANSI

11、approval for a standard does not include the Cover Page, Transmittal Pages and Title Page. The Department of Defense (DoD) has adopted UL 867 on June 11, 1992. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions

12、 on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should

13、 be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2016 UNDERWRITERS LABORATORIES INC. ANSI/UL 867-2016UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTR

14、IBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANERS - UL 867 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .6 2 General 6 2.1 Components .6 2.2 Units of measu

15、rement .7 2.3 Undated references .7 3 Glossary .7 CONSTRUCTION 4 General 8 4A Components 8A 4A.1 General .8A 4A.2 Attachment plugs, receptacles, connectors and terminals .8B 4A.3 Boxes and raceways .8C 4A.4 Cords, cables and internal wiring 8C 4A.5 Cord reels 8D 4A.6 Ground-fault, arc-fault and leak

16、age current detectors/interrupters 8D 4A.7 Light sources and associated components 8D 4A.8 Overcurrent protection 8E 4A.9 Power supplies 8E 4A.10 Supplemental insulation, insulating bushings and assembly aids 8F 4A.11 Transformers .8F 4A.12 Button or coin cell batteries 8G 5 Accessories 9 6 Frame an

17、d Enclosure 10 6.1 General 10 6.2 High-voltage power supply 11 6.3 Stationary or xed products .11 6.4 Portable products .14 7 Accessibility of Uninsulated Live Parts and Moving Parts .14 8 Mechanical Assembly 20 8.1 General 20 8.2 Assembly for shipping 21 9 Live Parts .21 10 Protection Against Corro

18、sion .21 10.1 Enclosure intended for indoor use 21 10.2 Enclosure intended for outdoor use .22 11 Electrical Insulation .23 11.1 All circuits .23 11.2 Primary circuits 23 11.3 Secondary circuits 24 12 Supply Connections .24 12.1 Permanently-connected products .24 12.2 Cord-connected products 26B 13

19、Polarization 30 13A Switches, Including Motor Controllers .30 14 Grounding 30B 14.1 General 30B SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANERS - UL 867 2AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 14.2 Bonding .31 14.3 Portable products

20、32 15 Internal Wiring 32 15.1 General .32 15.2 Primary circuits 33 15.3 High-voltage circuits 34 16 Capacitors .34 17 Coil Windings .34A 18 Printed-Wiring Boards 34A 19 Overcurrent Protection .34A 19A General Purpose Transformer Insulation Systems 34B 20 Motors and Motor Overcurrent Protection 35 21

21、 Washing .35 22 Filters .36 23 Spacings 37 23.1 General .37 23.2 Low voltage and isolated-limited-energy circuits 38 23.3 Line-voltage circuits 38 23.4 High-voltage circuits 40 23.5 Insulating barriers 42 24 Separation of Circuits .42 24.1 General .42 24.2 Class 2 circuits .43 24.3 Permanently-conne

22、cted equipment .43 PROTECTION AGAINST INJURY TO PERSONS 25 General 44 26 Rotating Parts 44 27 Enclosures and Guards 45 28 Impact Test 45 29 Switches and Interlocks .46 29.1 Switches 46 29.2 Interlocks 46 30 Electronic Circuits .47 31 Stability 47 32 Collector Handle Securement Test 47 33 External Su

23、rface Temperatures .48 PERFORMANCE 34 General 48 35 Leakage Current Test .49 35.1 General .49 35.2 Normal use 49 36 Leakage Current Following Humidity Conditioning 52 37 Partially Protected Parts .52 38 Input Test 53 39 Output Test 54 40 Ozone Test 54 40.1 General .54 40.2 Chamber specications .54 4

24、0.3 Equipment specications 56 SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANERS - UL 867 2BUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 40.4 Test method .57 SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANERS - UL 867 3UL COPYRIGHTED MATERIAL NOT A

25、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANERS - UL 867 4 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 41 Peak Ozone Emission Location Determ

26、ination 60 42 Strain Relief Test 61 43 Pushback Relief Test 62 44 Grounding Resistance Test .62 45 Temperature Test .63 46 Dielectric Voltage-Withstand Test 68 46.1 General .68 46.2 High-voltage transformer core .68A 46.3 Induced potential 68A 46A General Purpose Transformers 68A 46A.1 General .68A

27、46A.2 Voltage measurement test 68B 46A.3 Overload test .68B 46A.4 Repeated dielectric voltage-withstand test .69 46B Thermal Aging Test 69 47 Stored Energy Test .69 48 Evaluation of Reduced Spacings on Printed-Wiring Boards .71 48.1 General .71 48.2 Shorted trace test .71 49 Abnormal Operation Test

28、72 49.1 General .72 49.2 High-voltage supply .73 49.3 High-voltage spacings short circuit 73 49.4 Unenclosed high-voltage power supply .73 49.5 Component short- and open-circuit test 74 50 Metallic Coating Thickness Test 74 51 High-Voltage Insulating Material Arcing Test 75 52 Permanence of Marking

29、76 MANUFACTURING AND PRODUCTION TESTS 53 Dielectric Voltage-Withstand Test .76 54 Grounding Continuity 78 RATINGS 55 Details .78 MARKINGS 56 Visible During Installation and Inspection 78 57 Visible After Installation 79 58 Cautionary Markings .80 59 Manufacturers Literature .81 APPENDIX A FEBRUARY 1

30、, 2013 ELECTROSTATIC AIR CLEANERS - UL 867 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover electrostatic air cleaners rated at 600 volts or less, intended to remove dust and other particles

31、from the air and intended for use in accordance with the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements do not cover electrostatic air cleaners for use in hazardous locations or to clean atmospheres dened as hazardous by the National Electrical Code, ANSI/NFPA 70. 1.3 These requireme

32、nts do not cover air cleaners intended to remove particles other than dust and other particles normally found in heating and ventilating systems. 1.4 Requirements for the installation of duct-type electrostatic air cleaners are included in the Standard for the Installation of Air Conditioning and Ve

33、ntilating Systems, NFPA 90A; and the Standard for the Installation of Warm Air Heating and Air Conditioning Systems, NFPA 90B. 2 General 2.1 Components 2.1.1 Deleted 2.1.2 Deleted 2.1.3 Deleted 2.1.4 Deleted 2.1.5 No component shall contain liquid mercury. SEPTEMBER 16, 2016 ELECTROSTATIC AIR CLEANE

34、RS - UL 867 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.2 Units of measurement 2.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 2.3 Undated references 2.3.1

35、 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 3 Glossary 3.1 For the purposes of this standard the following denitions apply. 3.2 ACCESSIBLE PART A part located so that it

36、can be contacted by a person either directly or by means of a probe as specied in Accessibility of Uninsulated Live Parts and Moving Parts, Section 7. 3.3 AIR CLEANERS An air cleaner is dened as one of the following: a) Duct type A xed or stationary type air cleaner intended for installation in and

37、at adjoining ducts of heating, air conditioning, and ventilating systems. The air cleaner is not provided with a fan, and the duct may provide part or all of the overall enclosure. b) Fixed type A self-contained or duct type air cleaner intended to be permanently connected electrically. c) Portable

38、type A cord-and-plug-connected, self-contained type air cleaner that: 1) Can be easily moved from one place to another for use and 2) Has no provision for permanent mounting. d) Self-contained type A xed, portable, or stationary type air cleaner that includes all parts necessary for its intended ope

39、ration, including active cell, fan, and the overall enclosure. e) Stationary type A cord-and plug-connected, self-contained or duct type air cleaner that is constructed to be fastened in place or located in a dedicated space. 3.4 BASE MATERIAL Basic lter media type (paper, glass ber, HEPA, carbon) p

40、rovided without any coatings and/or infusions. 3.5 ELECTROSTATIC AIR CLEANER (AIR CLEANER) A product intended to remove dust and other particles from the air. The complete product consists of an assembly of a power pack, controls, ionizer- collector cell, and other components. 3.6 EXPOSED PART A par

41、t that is subjected to handling in normal use without removing parts such as doors, covers, or other parts if removal requires the use of a tool. 3.7 HIGH-VOLTAGE CIRCUIT A circuit involving a potential of more than 600 volts. 3.8 ISOLATED-LIMITED-ENERGY CIRCUIT A circuit derived from an isolated-se

42、condary winding of a transformer having a maximum capacity of 100 volt-amperes and an open-circuit-secondary voltage rating not exceeding 600 volts. AUGUST 4, 2011 ELECTROSTATIC AIR CLEANERS - UL 867 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION

43、FROM UL 3.9 LINE-VOLTAGE CIRCUIT A circuit involving a potential of not more than 600 volts, and having characteristics in excess of those of a low-voltage or an isolated-limited-energy circuit. 3.10 LOW-VOLTAGE CIRCUIT A circuit involving a potential of not more than 30 volts rms and supplied by a

44、primary battery, a Class 2 transformer, or by a combination of a transformer and xed impedance that, as a unit, complies with all the performance requirements for a Class 2 transformer. A circuit derived from a line-voltage circuit by the connection of resistance in series with the supply circuit to

45、 limit the voltage and current is not considered to be a low-voltage or an isolated-secondary circuit. 3.11 MEDIA COMBINATION Any possible set of pre-lters, main lters, and/or other ltration device intended to be used with a specic appliance design. 3.12 PARTIALLY PROTECTED PART A part that is expos

46、ed only during user servicing, with voltage and current limitations as specied in Partially Protected Parts, Section 37. 3.13 POWER SUPPLY A unit consisting of a high-voltage transformer and other electrical component. The unit may also contain controls for the air cleaner. 3.14 STANDARD FILTER MEDI

47、A Pre-lters, main lters, and/or other ltration devices installed within the air cleaning device when shipped. 3.15 USER SERVICING The replacing, cleaning, or adjusting of lters or adjustment of controls and the like intended to be done by the user. CONSTRUCTION 4 General 4.1 The construction of a pr

48、oduct shall be such that all of the following conditions are met: a) Normal use and user servicing do not result in a risk of electric shock, re, or injury to persons. b) The materials and component are used within their electrical, mechanical, and temperature limits. c) The assembly protects the co

49、mponents and wiring from being displaced or damaged. FEBRUARY 1, 2013 ELECTROSTATIC AIR CLEANERS - UL 867 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 4A Components 4A.1 General 4A.1.1 A component of a product covered by this standard shall: a) Comply with the requirements for that component as indicated in 4A.2 4A.10 or the individual component section; b) Be used in accordance with its rating(s) es