1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 8752 Organic Light Emitting Diode (OLED) PanelsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZE
2、D FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Organic Light Emitting Diode (OLED) Panels, UL 8752 First Edition, Dated June 13, 2012 Summary of Topics The following changes in requirements to the Joint UL/ULC Standard for Organic Light Emitting Diod
3、e (OLED) Panels, UL 8752/ULC-S8752, are being issued for the United States and Canada: 1. Limit the scope of the standard to lighting applications 2. Clarify polymeric materials Relative Thermal Index requirements for larger OLED panels 3. Allow for more than one power input connector in OLED panels
4、 4. Provide alternate method for secureness of soldered printed wiring board connections 5. Eliminate dual language for electrical input rating The new requirements are substantially in accordance with Proposal(s) on this subject dated July 12, 2013. All rights reserved. No part of this publication
5、may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited
6、to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use t
7、his Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safe
8、ty agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. Th
9、e requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are l
10、ocated after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. SEPTEMBER 30, 2013 UL 8752 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 30, 2013 UL 8752 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUT
11、HORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ULC Standards CAN/ULC-S8752 First Edition Underwriters Laboratories Inc. ANSI/UL 8752 First Edition Organic Light Emitting Diode (OLED) Panels June 13, 2012 (Title Page Reprinted: September 30, 2013) ANSI/UL 8752-2013UL COPY
12、RIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This Standard is issued jointly by Underwriters Laboratories Inc. (UL) and ULC Standards. Amendments to this Standard will be made only after processing according to the Stan
13、dards writing procedures by UL and ULC Standards. UL and ULC Standards are separate and independent entities and each is solely responsible for its operations and business activities. The UL trade names and trademarks depicted in this document are the sole property of Underwriters Laboratories Inc.
14、The ULC Standards trade names and trademarks depicted in this document are the sole property of ULC Standards. ISSN 0317-526X Copyright 2013 ULC Standards All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, whatsoever withou
15、t the prior permission of the publisher. In Canada, written comments are to be sent to ULC Standards, 400 171 Nepean Street, Ottawa, Ontario KP2 0B4. Proposals should be submitted on a Standards Revision Request Form available from ULC Standards. Copyright 2013 Underwriters Laboratories Inc. ULs Sta
16、ndards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety co
17、nsists of the First Edition. The most recent designation of ANSI/UL 8752 as an American National Standard (ANSI) occurred on September 30, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), an informative Annex, or the Preface. Comment
18、s or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-
19、853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 INTRODUCTION 1 Scope .6 2 Components 7 3 Units of Measurement .8 4 Undated References 8 5 Glossary .8 MECHANICAL CONSTRUCTION 6 General 9 7 Mounting .9 8 Glass 9 9
20、Polymeric Materials .9 10 Adhesives .10 11 Conductor Protection 10 ELECTRICAL CONSTRUCTION 12 General 11 13 Current Carrying Parts 12 14 Splices and Connections 12 15 Segregation from Other Conductors .13 16 Switches and Controls .13 17 Supply Connections .13 PERFORMANCE 18 Input Power .14A 19 Tempe
21、rature Test .14A 20 Abnormal Input Test 15 21 Component Fault Tests 16 22 Flame Spread and Smoke Developed Test 17 23 Glass Breakage Weight Test .17 24 Static Load Mounting Test .17 25 Conductor Secureness Test 17 MARKING AND INSTRUCTIONS 26 General 18 27 Installation and Operation Instructions .19
22、TABLES ANNEX A (NORMATIVE) Supplemental Requirements for Higher Power OLED Panels A1 General .21 SEPTEMBER 30, 2013 CAN/ULC-S8752 ANSI/UL 8752 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANNEX B (NORMATIVE) Reference Standards SEPTEMBER
23、 30, 2013 CAN/ULC-S8752 ANSI/UL 8752 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common UL and ULC Standard for Organic Light Emitting Diode (OLED) Panels. It is the First edition of both CAN/ULC-S8752 and ANSI/UL 87
24、52. This Joint Standard was prepared by Underwriters Laboratories Inc., ULC Standards, and the Technical Committee on Solid State Lighting (TCSSL). The standard was formally approved by the UL/ULC Technical Committee on Solid State Lighting (TCSSL). The efforts and support of the Technical Committee
25、 are gratefully acknowledged. Only metric SI units of measurement are used in this Standard. If a value for measurement is followed by a value in other units in parentheses, the second value may be approximate. The rst stated value is the requirement. In Canada, there are two official languages, Eng
26、lish and French. All safety warnings must be in French and English. Attention is drawn to the possibility that some Canadian authorities may require additional markings and/or installation instructions to be in both official languages. Annex A and Annex B, both identifed as normative, form a mandato
27、ry part of this Standard. Note: Although the intended primary application of this Standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of Harmonization This Standard is pu
28、blished as an identical standard between UL and ULC Standards. An identical standard is a standard that is the same in technical content except for conicts in Codes and Governmental Regulations. Presentation shall be word for word except for editorial changes. Interpretations The interpretation by t
29、he SDO of an identical or equivalent standard shall be based on the literal text to determine compliance with the standard in accordance with the procedural rules of the SDO. If more than one interpretation of the literal text has been identied, a revision shall be proposed as soon as possible to ea
30、ch of the SDOs to more accurately reect the intent. UL Effective Date A UL effective date is established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. SEPTEMBER 30, 2013 CAN/ULC-S8752 ANSI/UL 8752 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR
31、DISTRIBUTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements apply to organic lighting emitting diode (OLED) panels intended for task, ambient, or aesthetic illumination, and for portable or permanent installation in accordance with the following standards, and for connection
32、to isolated (non-utility connected) power sources such as generators, batteries, fuel cells, solar cells, and the like, in accordance with the: In Canada: Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA C22.1, In the United States: National Electrical Code (NEC),
33、ANSI/NFPA 70. 1.1 revised September 30, 2013 1.2 The OLED panels covered by this standard are intended to be installed in dry or damp locations only, in one or more of the following congurations: a) Secured directly to the walls or ceiling of a structure, b) Integrated into a mechanical frame or str
34、ucture that is in turn mounted or secured to the walls or ceiling of a structure (for example, a luminaire or sign), c) Integrated into a mechanical frame or structure that is portable and able to be relocated without special tools or skills (for example, a portable luminaire). 1.3 The OLED panels c
35、overed by this standard are intended to be supplied from an electrical power source operating within the voltage and current limits specied in Electrical Construction General, Section 12. These voltage limits are understood to represent no risk of electric shock injury, and the current limits suffic
36、ient to adequately reduce the risk of re initiation. Exception: For OLED panels intended to be supplied by a power source beyond the limits of Section 12, see the Supplemental Requirements for Higher Power OLED Panels, Annex A. 1.4 An OLED panel mounted within the frame structure of a xed or portabl
37、e luminaire per 1.2 (b) or (c) need not comply with the requirements in this standard where the risk of re or injury is fully addressed by the applicable luminaire standard. 1.5 These requirements do not address the power sources used to supply an OLED panel. Mechanically integrated assemblies that
38、include both an OLED panel and a power source shall be evaluated for conformance with the applicable luminaire standard. Some power sources suitable for use with OLED panels are identied in Electrical Construction General, Section 12. SEPTEMBER 30, 2013 CAN/ULC-S8752 ANSI/UL 8752 6UL COPYRIGHTED MAT
39、ERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 1.6 This standard does not include requirements for the evaluation of OLED panels intended for use in: In Canada: a) Hazardous locations as specied in the Canadian Electrical Code, CSA C22.1; b) General patient
40、care areas or critical patient care areas as dened by Section 24 of the Canadian Electrical Code, CSA C22.1; c) Emergency systems as dened by Section 46 of the Canadian Electrical Code, CSA C22.1; or d) Air-handling spaces as dened by Rule 12-010 of the Canadian Electrical Code, CSA C22.1. In the Un
41、ited States: a) Hazardous locations as specied in the National Electrical Code (NEC), ANSI/NFPA 70; b) General patient care areas or critical patient care areas as dened by Article 517 of the National Electrical Code (NEC), ANSI/NFPA 70; c) Emergency systems as dened by Article 700 of the National E
42、lectrical Code (NEC), ANSI/NFPA 70; or d) Air-handling spaces as dened by Article 300.22(C) of the National Electrical Code (NEC), ANSI/NFPA 70. 1.7 This standard does not include requirements for the assessment of OLED panel compliance with building code seismic requirements. 2 Components 2.1 Excep
43、t as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. 2.2 A component is not required to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the pr
44、oduct covered by this standard, or b) Is superseded by a requirement in this standard. 2.3 A component shall be used in accordance with its rating established for the intended conditions of use. SEPTEMBER 30, 2013 CAN/ULC-S8752 ANSI/UL 8752 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU
45、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 2.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used o
46、nly under those specic conditions. 3 Units of Measurement 3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. 3.2 Unless otherwise indicated, all voltage and current values mentioned in this standard are root-mean-square (rms).
47、 4 Undated References 4.1 See Annex B for a list of publications referenced in this standard. Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 5 Glossary 5.1 For the purposes o
48、f this standard, the following denitions apply. 5.2 FIXED LUMINAIRE A lighting assembly intended for xed mounting and permanent connection to the facility electrical system. 5.3 OLED An assembly of organic (carbon-based) electroluminescent semiconductor material situated between two electrodes, at l
49、east one of which is transparent. When supplied with an electric current (by applying a voltage across the electrodes), the organic material emits light. 5.4 OLED PANEL An independently operable unit consisting of one or more OLEDs (of any size) with means for connection to an electrical current source. The panel may incorporate passive electrical components to regulate the current, and may also include a frame and/or means for mounting. 5.5 POR
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1