1、American National Standardfor Ophthalmics Nonprescription Sunglass andFashion Eyewear RequirementsANSI Z80.3-2015ANSI Z80.3-2015ANSIZ80.3-2015Revision ofANSI Z80.3-2010American National Standardfor Ophthalmics Nonprescription Sunglass andFashion Eyewear RequirementsSecretariatThe Vision CouncilAppro
2、ved September 4, 2015American National Standards Institute, Inc.Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgement o
3、f the ANSI Board ofStandards Review, substantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a concerted ef
4、fort be madetowards their resolution.The use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conformi
5、ng to the standards.The American National Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name o
6、f the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American Nation
7、al StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished
8、byThe Vision Council225 Reinekers Lane, Suite 700Alexandria, VA 22314Copyright 2015 by The Vision CouncilAll rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of the publisher.Printed in the Unite
9、d States of AmericaDeveloped byThe Accredited Committee Z80 for Ophthalmic StandardsThe Vision Council225 Reinekers Lane, Suite 700Alexandria, VA 22314Contents Foreword iii 1 Scope and Purpose 1 2 Normative References 1 3 Definitions 3 4 Requirements . 8 4.1 General 8 4.2 Impact resistance . 9 4.3 F
10、lammability . 9 4.4 Frame finish 9 4.5 Frame corrosion . 9 4.6 Frame material safety to health of wearer . 9 4.7 Frame deformation and retention of lenses 9 4.8 Cosmetic quality of lenses 10 4.9 Refractive properties 10 4.9.1 Refractive power 10 4.9.2 Astigmatic power 10 4.9.3 Prismatic power imbala
11、nce . 10 4.10 Transmittance properties 10 4.10.1 Luminous transmittance . 10 4.10.2 Transmittance properties related to traffic signal recognition 10 4.10.2.1 Color limits . 10 4.10.2.2 Traffic signal transmittance . 11 4.10.2.3 Spectral transmittance 12 4.10.3 Ultraviolet mean transmittance . 12 4.
12、10.4 Near infrared transmittance 12 4.10.5 Blue light transmittance 12 4.11 Qualification of lens types . 12 4.11.1 Polarizing lens 12 4.11.1.1 Type I polarizing lens 12 4.11.1.2 Type II polarizing lens . 12 4.11.2 Photosensitive lens. 12 4.11.2.1 Type I variable transmittance photosensitive lens .
13、12 4.11.2.2 Type II variable color photosensitive lens . 12 4.11.3 Gradient tint lens 12 4.11.4 Uniform tint lens . 13 4.12 Tint imbalance between lenses 13 4.13 Axis of polarization . 13 4.14 Resistance to radiation . 13 5 Test Procedures . 13 5.1 Impact resistance . 13 5.1.1 Lens or blank only 13
14、5.1.1.1 Lens or blank on tube . 14 5.1.1.2 Lens or blank on block 14 5.1.1.3 Modification of supports 14 5.1.2 Lens in frame 14 5.2 Alternate tests 14 5.3 Ignition test . 14 5.3.1 Apparatus . 14 5.3.1.1 Steel rod . 14 5.3.1.2 Timer 14 i5.3.2 Procedure . 14 5.4 Corrosion resistance test 15 5.4.1 Appa
15、ratus . 15 5.4.2 Procedure . 15 5.5 Cosmetic quality test 15 5.6 Refractive properties test 15 5.7 Transmittance properties tests . 15 5.7.1 Luminous transmittance test . 15 5.7.1.1 Photometric test . 16 5.7.1.2 Visual method . 16 5.7.2 Transmittance properties related to traffic signal recognition
16、16 5.7.2.1 Chromaticity coordinates 16 5.7.2.2 Traffic signal transmittance . 17 5.7.3 Ultraviolet mean transmittance test . 17 5.7.4 Near infrared transmittance 18 5.7.5 Solar blue transmittance . 18 5.8 Photosensitive lens qualification test 19 5.9 Resistance to radiation test 19 6 Country of orig
17、in . 19 7 Identification of the standard . 20 Table 1 Computational data for transmittance properties 21 Table 2 Reference data for products given in Table 1 . 22 Table 3 Solar irradiation at sea level with surface perpendicular to suns rays, m = 2 23 Table 4 Transmittance properties for nonprescrip
18、tion sunglass and cosmetic lenses 24 Table 5 Data for computing blue light transmittance 25 Figure 1 Color limit regions of acceptance 26 Figure 2 Lens on tube. 27 Figure 3 Baseplate . 28 Figure 4 Lens on block . 29 Figure 5 Recommended system for visually inspecting lens for defects . 30 Annex A Bi
19、bliography . 31 iiiiiForeword (This foreword is not part of American National Standard ANSI Z80.3-2015.)Summary of Changes to ANSI Z80.3 for 2015This 2015 revision represents the most current consensus of experts in this field. Thechanges from the 2010 standard are the result of a thorough study by
20、the ANSI Z80.3committee of the relevance and applicability of its contents.This revision incorporates a continued effort to more properly explain and clarify con-cepts and principles, and to more closely align requirements of this standard withsimilar relevant provisions in existing US and internati
21、onal standards. In addition tominor typographical corrections, changes include: Prism power and imbalance are now defined only for finished products in theas-worn position, since lenses with high base curves and/or significant face-form (wrap) angles must include the proper compensating prism in the
22、 lensblanks to ensure minimal prism in the final product. Luminous transmittance variations and tolerances are now provided in unitsof percent rather than density. Definitions of reference point, special purpose lenses, and polarization axistolerance are added. Minimum luminous transmittance of grad
23、ient tint lenses is modified. A figure demonstrating assessment of cosmetic lens quality is added. Procedure for assessment of frame flammability is amended. Finally, new requirements for frame durability, such as corrosion, materialsafety, and deformation, which already exist in other standards, ar
24、e added.Background and summary of past revisions for ANSI Z80.3Changes made in 2010 were the addition of subclauses addressing resistance to ra-diation; revision of the photosensitive lens qualification test; addition of the definitionof polarizing efficiency; correction of the equations for the cal
25、culation of mean trans-mittance; addition of country of origin labeling; and addition of an equation to theNotes under Table 5.The purchasers and users of nonprescription sunglasses and fashion eyewear needto be assured of certain minimum levels of performance and quality in these prod-ucts. These a
26、re either implicit expectations in the product performance, or safety.The purchaser of the product does not ordinarily have the means to properly assessthese characteristics.In order to accomplish these goals, it is necessary to establish commonly accepteddefinitions, equations, sources, and methodo
27、logy so that manufacturers can produceproducts to meet the standard.This American National Standard specifies impact-resistant characteristics; cosmet-ic, refractive, and transmittance properties of lenses; and the flammability and dura-bility of frames and lenses.Cosmetic, refractive, transmittance
28、, and frame properties specified herein are intend-ed as guidelines, and therefore they are subject to revision since there is a need tostudy further the validity of these property specifications as related to actual normaluse requirements.The Z80.3 Subcommittee was organized in December 1970 and ha
29、d its first meetingon January 7, 1971. The committee usually meets formally twice per calendar year,ivand members review material by email, phone, or fax throughout the year. Workinggroups may be formed to investigate specific projects.This standard contains one annex, which is informative and is no
30、t part of this stan-dard.Suggestions for improvement of this standard will be welcome. Suggestions shouldbe sent to The Vision Council, 225 Reinekers Lane, Suite 700, Alexandria, VA22314.This standard was processed and approved for submittal to ANSI by the AccreditedStandards Committee Z80 (ASC Z80)
31、. Committee approval of this standard does notnecessarily imply that all committee members voted for its approval. At the time it ap-proved this standard, ASC Z80 had the following members:Thomas C. White, M.D., ChairQuido Cappelli, Vice-ChairWilliam J. Benjamin, O.D., SecretaryOrganization Represen
32、ted Name of RepresentativeAbbott Medical Optics (AMO) . Leonard BorrmannMark Gordon (Alt.)Advance Medical Technologies Association. Michael PflegerDr. Richard Courtney (Alt.)American Academy of Ophthalmology . Dr. Thomas WhiteDr. Carl Tubbs (Alt.)Dr. Pradeep Ramulu (Alt.)Scott Haber (Alt.)American A
33、cademy of Optometry. Dr. David LoshinAmerican Ceramic Society . Lyle RubinAmerican Glaucoma Society Dr. Steven GeddeDouglas Rhee (Alt.)American Optometric Association. Dr. Karl CitekDr. Robert Rosenberg (Alt.)Dr. William Benjamin (Alt.)American Society of Cataract and Refractive Surgery (ASCRS) Dr.
34、Stephen KlyceDr. Jack Holladay (Alt.)Contact Lens Institute. Stan RogaskiPeter Mathers (Alt.)Contact Lens Manufacturers Association . Quido CappelliTroy Miller (Alt.)Department of Veterans Affairs Dr. John TownsendMichael White (Alt.)Federated Cornea Societies. Dr. Michael BelinDr. David Glasser (Al
35、t.)Kathy Colby (Alt.)Elmer Tu (Alt.)Food however, variable tint lenses that fade to a luminous transmittance greater than 75% are covered. Lenses with less than 75% luminous transmittance anywhere on the lenses are not suitable for driving under low light conditions, such as but not limited to twili
36、ght or night. 2 Normative References The following standards contain provisions that, through reference in this text, constitute provisions of this American National Standard. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged to
37、apply the most recent editions of the standards indicated below. ANSI Z80.1, Ophthalmics Prescription Ophthalmic Lenses Recommendations1 ANSI Z80.5, Ophthalmics Requirements for ophthalmic frames1 ANSI Z80.17, Focimeters1ANSI Z87.1, Occupational and educational eye and face protection devices11Avail
38、able from the American National Standards Institute, 25 West 43rdStreet, New York, NY 10036 (Website: webstore.ansi.org). ANSI Z80.3-2015 2 ANSI/ASQC Z1.4, Sampling procedures and tables for inspection by attributes1 ASTM D412, Standard test methods for vulcanized rubber and thermoplastic elastomers
39、 tension2ASTM D2240, Standard test method for rubber property durometer hardness2Code of Federal Regulations, Title 21 Part 801.4103ISO 12311, Personal protective equipment test methods for sunglasses and related eyewear1ISO 12312-1, Eye and face protection Sunglasses and related eyewear Part 1: Sun
40、glasses for general use1 2Available from the ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428 (Website: www.astm.org) 3Available from the U.S. Government Publishing Office, P.O. Box 979050, St. Louis, MO 63197-9000 (Website: www.gpo.gov) ANSI Z80.3-2015 3 3 Definitions 3.1 Capa
41、ble of withstanding an impact test The ability of a lens to withstand impact as determined by 100% testing or by testing of a statistically significant sample (for example, conforming to the requirements of ANSI/ASQC Z1.4) of each production batch, or at the option of the manufacturer, as an integra
42、l part of the manufacturing process. Capability of withstanding an impact test is determined by testing at any feasible stage of manufacture, as described in 5.1.1 and 5.1.2. 3.2 Reference point The point on a lens blank, unmounted lens, or finished lens at which refractive properties, and around wh
43、ich transmittance properties, are specified and measured. 3.2.1 Intended visual axis When specified, the point on a lens coincident with the wearers interpupillary distance or other known or presumed line of sight. 3.2.2 Geometric center When the intended visual axis is not specified, the geometric
44、center shall be the reference point. The geometric center is the point midway between the two vertical tangents and midway between the two horizontal tangents of the edges of a finished lens. For a one-piece or goggle lens intended to cover both eyes, the vertical midline of the lens may be used to
45、determine the geometric center of the portion of the lens for each eye. 3.3 Lens fracture A lens is considered to have fractured when it cracks through its entire thickness and across a complete diameter into two or more separate pieces, or when any piece of lens material visible to the naked eye be
46、comes detached from the ocular surface, or if the test ball passes through the lens. 3.4 Lens types 3.4.1 General purpose lens A lens whose nominal luminous transmittance is at least 8% and that allows the apparent chromaticity of Standard Illuminant D65, when viewed through the lens, to fall within
47、 the boundary for daylight (4.10.2.1 part 4, and Figure 1). 3.4.2 Gradient tint lens A lens whose luminous transmittance varies significantly across the lens. 3.4.3 Photosensitive lens A lens whose luminous transmittance or color, or both, depends on the recent exposure history of the lens. 3.4.4 Po
48、larizing lens A lens whose luminous transmittance varies with the amount and orientation of the polarization in the incident light. ANSI Z80.3-2015 4 3.4.5 Special purpose lens 3.4.5.1 Strongly colored lens A lens that causes the apparent chromaticity of Standard Illuminant D65, when viewed through
49、the lens, to fall outside of the boundary for daylight (4.10.2.1 part 4, and Figure 1). 3.4.5.2 Very dark lens A lens whose nominal luminous transmittance is between 3% and 8%. 3.4.6 Uniform tint lens A lens whose luminous transmittance does not vary significantly over the area of the lens. 3.5 Noncorrective impact-resistant lenses Glass lenses, plastic lenses, or laminated glass lenses made impact resistant by any method. However, all such lenses shall be capable of withstanding the impact test described in 5.1. 3.6 Production batch An identifiable group of len
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1