ARMY A-A-1954 A-1993 MEASURING SET SPOON (CORROSION-RESISTING STEEL)《量匙组(耐蚀钢)》.pdf

1、A-A-L954A m 9999974 OL4503b 281 m c I r INCH-POUND A-A-1954A July 14. 1993 SUPERSEDING A-A-19 54 September 29, 1982 COMMERCIAL ITEM DESCRIPTION MEASURING SET, SPOON (CORROSION-RESISTING STEEL) The General Services Administration has authorized the use of this commercial item description as a replace

2、ment for Military Specification MIL-M-40122 which has been canceled. 1. SCOPE 1.1 Scoxe. This commercial item description covers a corrosion- resisting steel measuring spoon set consisting of a tablespoon, teaspoon, 1/2-teaspoon and 1/4-teaspoon. 2. APPLICABLE DOCUMENTS 2.1 The documents referenced

3、in this commercial item description shall be the issues in effect on the date of issuance of the invitation for bids or request for proposals unless otherwise specified. These documents form a part of this commercial item description to the extent specified. In the event of a conflict between this c

4、ommercial item description and a document referenced herein, this commercial item description shall take precedence. 0 Federal Standard: FED-STD-376 - Preferred Metric Units for General Use by The Federal Government. Beneficial comments, recommendations, additions, deletions, clarifications, etc., a

5、nd any other data which may improve this document should be sent to : General Services Administration, Engineering Group (7FXEE), 819 Taylor Street, Fort Worth, TX 76102. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. FSC 7330 Provided by IHSNot for ResaleNo repro

6、duction or networking permitted without license from IHS-,-,-A-A-19 54A e Copies of Federal standards are available from the General Services Administration Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, DC; Atlanta, GA; Chicago, IL; Kansas City, MO; Fort Worth,

7、TX; Denver, CO; San Francisco, CA; Seattle, WA, and the GSA Specifications Unit (3FB-W), Suite 8100, 470 E. LEnfant Plaza, S.W., Washington, DC 20407. V i Militan Standard: MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. Copies of military standards may be obtained from St

8、andardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. American Iron and Steel Institute: Handbook - Finishes for Stainless Steel Application for copies of AIS1 handbooks should be addressed to the Committee of Stainless Steel Producers, American Iron and Stee

9、l Institute, 1000 16th Street, N.W., Washington, DC 20036. ASTM Standard: E 29 - Standard Practice For Using Significant Digits in Test Data to Determine Conformance with Specifications. Application for copies of ASTM standards should be addressed to ASTM, 1916 Race Street, Philadelphia, PA 19103. 3

10、. SALIENT CHARACTERISTICS 3.1 Desicrn and construction. The measuring spoon set shall consist of four spoons; one each of the following capacities: 1- tablespoon, 1-teaspoon, 1/2-teaspoon and 1/4-teaspoon. The spoons shall be formed from 300-series stainless steel with a minimum thickness of 0.028 i

11、nch (0.7 mm). The tablespoon shall measure 5 inches (12.7 cm) f 1/4 inch (0.6 cm) in length and each smaller size measuring spoon shall be proportionately shorter in length to allow nesting of the bowls. The spoon handle shall measure 3/8 inch (0.95 cm) minimum in width. A key ring or wire loop shal

12、l pass through a hole in each spoons handle to hold the set together. The handle may be embossed at the manufacturers option. The capacity tolerance shall be f 2 percent. The capacities shall be as follows: 1/4 Teaspoon 1/2 Teaspoon Teaspoon Tablespoon ? 1.2 milliliters 2.4 milliliters 4.8 millilite

13、rs 14.7 milliliters 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-3954A 9999974 0345038 054 = A-A-19 54A 3.2 Finish. The spoon set shall have a polished finish equivalent to a No. 2B or better as defined by the American Iron and Steel Institu

14、te handbook, ItFinishes for Stainless Steel.It 3.3 Markinq. Each spoon shall have its capacity stamped in legible lettering measuring 1/8 inch (3.2 mm) minimum height. 3.4 WorkmanshiD. The spoon set shall be free from sharp edges, slivers, burrs, deep scratches, pits and tool marks. The spoon set sh

15、all not be bent, damaged, or distorted. There shall be no defects which impair the durability, appearance, or serviceability of the item. a ? r 3.5 Reaulatorv reauirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximu

16、m extent practicable. 3.6 Measurement svstem. The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informational purposes only. 3.7 Metric rmoducts. Products manufactured to metric dimensions will be considered on an equal basis with thos

17、e manufactured using inch-pound units, providing they fall within tolerances specified using conversion tables contained in the latest revision of FED- STD-376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tole

18、rances specified in the inch-pound units, a request should be made to the specification preparing activity for changes to this document. 3.8 Commercial item. The use of the term llcommercial item descriptiontg in this document does not imply that any item or items offered are not required to conform

19、 with all requirements specified herein. 4. QUALITY ASSURANCE PROVISIONS 4.1 Certification. The contractor shall certify that the measuring spoon set meets the salient characteristics and the requirements of this commercial item description, and, except for any government unique requirements specifi

20、ed, conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace, or is the same product that has been successfully been delivered to the government on a previous contract or purchase order.

21、 The government reserves the right to require proof of such conformance prior to the first delivery and the contract. 4 thereafter as may be otherwise provided for under the provisions of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-3954A =

22、9999974 0345039 T90 A-A- 19 54A 4.2 Responsibilitv for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the

23、contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed

24、necessary to assure that supplies and services conform to prescribed requirements. 9 4.3 Samplinq. The levels of inspection and acceptable quality levels (AQLs) shall be in accordance with MIL-STD-105. 4.4 Lot formation. All spoon sets from the same manufacturer offered for delivery at one time shal

25、l be considered a lot for purposes of inspection. 4.5 Samplina for visual and dimensional examination. A random sample of spoon sets shall be selected from each lot in accordance with inspection level S-4, AQL 4.0 expressed in terms of defects per hundred units (dhu). The sample unit shall be one sp

26、oon set. The sample spoon set shall be visually and dimensionally examined to verify compliance with table I and the remainder of this commercial item description. All dimensions are absolute as defined in ASTM E 29. TABLE I. Examination for defects Examine Defect Finish Area of corrosion, stain or

27、discoloration Not as specified Construction Scratch or tool mark L/ Any sharp edge (except for cutting edge, sliver, Workmanship rough tool or die mark, or burr Any spoon fractured, split, bent, buckled, punctured or otherwise impaired Capacity not as specified CaDacitv markinq missina or illeaible

28、and L/ - An unacceptable scratch is one that will catch a fingernail when run across it. 4.6 Examination for preDaration for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate, and shipping containers (as applicable) for conform

29、ance with the packaging, packing, andmarking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, AQL 6.5 (dhu). 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-3954A H 7797774 0345040 702 A-A- 1

30、9 54A 5. PREPARATION FOR DELIVERY 5.1 Packasins, P ackins. and markinq. The packaging, packing, and s marking shall be as specified in the contract or order. 6. NOTES 6.1 Orderina data. Purchasers should include the following information in procurement documents (if applicable). T a. Title, number,

31、and date of this commercial item b. The packaging, packing, and marking required. description. 6.2 National Stock Number, The following NSN corresponds to this cid: 7330-00-272-7876. MILITARY INTERESTS: Military Coordinatins Activity: Custodians: Civil Asencv Coordinatins Activity: Army - GL Navy - SA VA - OSS Air-Force - 99 Review Activities: Preparina Activity: Army - MD, QM Air Force - 84, 50 User Activity: GSA - FSS (DoD Project Number 7330-0653) , Navy - MC 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-