ARMY A-A-50164-1988 COMMUNION SET INDIVIDUAL CUP TYPE《独杯式圣餐组件》.pdf

1、A-A-50164 April 15, 198% COMMERCIAL ITEM DESCRIPTION COMMUNION SET, INDIVIDUAL CUP TYPE The General Services Administration has authorized the use of this commercial item description in preference to MIL-C-43437. 1. SALIEKT CHARACTERISTICS 1.1 Design and construction. The communion set shall be fabr

2、icated of chromium plated brass. All surfaces shall be brass, chromium plated. The communion set shall consist of the following: 1 base measuring approximately 12 inches in diameter; three (3) tray assemblies consisting of one tray base measuring approximately 12 inches in diameter to accommodate 1

3、cup holder. The cup holder shall have the capacity to hold forty (40) communion cups; the cup holder should approximate 10 inches so as to fit the tray base; 1 cover measuring approxi- mately 11 inches in diameter and include a removable cross at the center. The height of the cover witn the cross sh

4、all approximate four inches. There shall be three (3) patens measuring approximately 10 inches in diameter. 2. QUALITY ASSURANCE 2.1 Certification. the salient characteristics of this descriDtion and conforms to the producers The contractor shall certify that the product offered meets own drawings,

5、specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified for any commercial charac- teristic the contractor shall furnish data resulting from inspection conducte

6、d in accordance with the specific quality assurance provisions. reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government 3. PACKAGING 3.1 Packaging. inserted into a clear plast

7、ic bag. Prior to enclosing the cover in plastic, the cross shali be removed and reinserted so that it is on the inside of the cover. Each component of the communion set shall be individually FSC 9925 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot

8、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-I- .- A-A-50 164 Each bagged component shall be placed into a FOL-style fiberboard box. shall be constructed of corrugated fiberboard with a minimum bursting strength of 200 pounds. The approximate inside dimensions of e

9、ach box shall be 14-1/2 inches in length, 4-1/2 inches in width and 14-3/2 inches in depth. Approximate dimensions are furnished as a guide only. 3.2 Packing, One complete communion set shall be packed in a snug-fitting fiberboard chipping container conforming to style RSC, type CF, (variety SW) or

10、SF, class domestic, grade 275 of PPP-B-636, The approximate inside dimensions of the container shall be 29 inches in length, .18 inches in width and 14-1/2 inches in depth. Approximate dimensions are furnished as a guide only. 3.3 Palletization. When specified (see 4.2), communion sets shall be pall

11、et- ized on a 4-way entry pallet in accordance with had Type Ia of MIL-STD-147. Each prepared load shall be bonded by means K and L, or O or P, and pallet pattern shall be number 1 in accord an ce with MIL-STD-147. 3.4 Marking. purchase order, unit packs, shipping containers and unitized pallet load

12、s shall be marked in accordance with MIL-STD-129. 4. NOTES 4.1 Intended use, The communion set is intended for use in Chapels during Protestant Communion Services. 4.2 Ordering data. The box In addition to any special markings required by the contract or a, Title, namber, and date of this document,

13、b. When palletization is required (see 3.3). MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians GSA - FSS Army - GL PREPARING ACTIVITY: Navy - PE Air Force - 28 Army - GL Review activities Project No. 9925-1006 Armed Forces Chaplains Board DLA - GS 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-